The structural features of an alloy (e. g., grain and phase structure) that are subject to observation under a microscope.
在显微镜下观察到的某合金的结构特征(例如：晶粒和相的组织结构特征)。
The far field diffractive pattern calculating formula for diffraction antenna with continuous phase structure is derived by current distribution method in antenna theory for the first time.
应用天线理论中的电流分布法，首次推导了具有连续位相结构的反射式毫米波衍射天线的远场衍射图计算公式。
Titanium nitride was synthesized by ammonia reduction and nitridation under flowing ammonia atmosphere while the content and tetragonal phase structure of zirconia was unchanged.
采用氨气还原氮化法，在流动的氨气氛下原位反应生成氮化钛，同时保持四方相氧化锆含量和结构不变。
The study of the nuclear property includes the Equation of state, the phase structure, the medium effect ect.
对核物质性质的研究包括核物质的状态方程、相结构、介质效应等方面。
The results showed that there was obvious transformation of phase structure in the process of arising temperature, and the specific heat of quasicrystals was higher.
结果表明，准晶材料在升温和降温过程中有明显的相结构转变； 准晶材料的比热容较高。
The relationship between the phase structure, the impact fracture mechanism and the impact strength of the blends was investigated.
研究了共混体的相结构、冲击断裂机理和冲击强度之间的关系。
The fabricating process of metallic ceramic coatings by thermochemical reaction method was studied. The phase structure and microstructure of the coatings were also investigated in this paper.
研究用热化学反应法在金属表面制备陶瓷涂层的工艺，并对涂层的相结构及显微组织进行分析。
Experiments show that the dual phase structure suitable to wire drawing consists of fine ferrite islands dispersed in the matrix of lath martensite.
实验表明，适于拔丝的双相组织是在板条马氏体基体上分布着细小的铁素体岛。
Through the blending of PET and PE components in different ratios, the resulting samples are studied for their compatibility and phase structure by DSC, WAXD and SEM.
本文通过对不同比例的PET和PE组分进行共混，并对所得样品采用DSC、WAXD和SEM 三种方法对试其相容性和相结构。
The phase structure and high toughness of powder sintered biphase stainless steel and after its ageing have been studied.
研究了粉末烧结双相不锈钢及其时效后的相结构和强韧性。
The phase structure and dislocations in rapidly solidified AZ91D magnesium alloy were studied by TEM and XRD techniques.
采用TEM和XRD分析技术研究了快速凝固AZ 91 D镁合金的相结构及位错。
After proper heat treatment the steel will have a dual phase structure of austenite and bainite. arranged alternatively in the form of lath ferrite and thin film austenite.
经适当热处理，获得贝氏体铁素体板条与奥氏体薄膜交替排列的奥氏体-贝氏体双相组织。
Meanwhile its microscopic phase structure is also studied with the help of TEM.
与此同时，还利用透射电镜，研究了该胶粘剂的微观相态结构。
The ore phase structure, mineral composition and metallurgical property of Brazilian MBR lump ore were introduced.
分析了巴西M BR块矿的矿相结构、矿物组成及冶金性能。
Morphology and phase structure of the black ceramic coatings were also investigated by XRD and SEM.
通过SEM和XRD分析了黑色陶瓷膜层的微观形貌和相结构。
The effects of compatibility and phase structure on porous structure and hydrophilic properties of blend fibers were further investigated. Many important results were obtained.
进一步研究了相容性及相结构与共混纤维微孔结构和亲水性能的关系，得到了一系列重要的结论。
The phase structure and composition of the modified layer was characterized by XRD and GDOES , and its properties were tested by microhardness meter and ball-plate wear instrument.
通过GDOES 、XRD等手段标定表层成分和相结构，借助显微硬度计和球盘磨损仪测试合金渗层的性能。
Aggregative fluidization is characterized by a clear two phase structure, viz.
聚式流态化具有明显的两相结构。
It suggests that the phase structure can be controlled by lowering the surface energy of polyetherimide and it is a possible way to obtain co-continuous structure with a smaller periodic distance.
因此，通过改变固化温度和聚醚酰亚胺的端基来降低聚醚酰亚胺的表面能，可以在一定程度上调控反应诱导相分离体系的相结构，并获得相间距较小的双连续结构。
The phase structure, hydrogen storage performance and electrochemical performance of the alloys were studied by XRD and three-electrode test system.
采用X射线衍射和三电极测试体系研究了合金的相结构、贮氢性能和电化学性能。
The microstructure, phase structure and composition of the area near the coating interface were analyzed. The microhardness and corrosion resistance of the coating were also tested.
分析了涂覆界面附近区域的显微组织形貌、相结构及化学成分，并对显微硬度和耐蚀性进行了测试。
The phase structure and microstructure of as-cast and quenched alloys were analyzed and observed by XRD and SEM.
用XRD和SEM分析了铸态及快淬态合金的相结构，并观察了合金的微观组织形貌。
The composition, surface morphology and phase structure of the films were tested by EDXA, FSEM, AFM and XRD, respectively.
并通过EDXA、FSEM、AFM和XRD等手段，检测薄膜的成分、表面截面形貌和相结构。
By the analysis of XRD and SEM, the phase structure and microstructure were studied. Principle of transparent ceramics synthesized by laser sintering was discussed.
采用X射线衍射，扫描电镜分析了陶瓷的物相和显微结构，探讨了激光烧结透明陶瓷的透光机理。
We review the status of the research on the phase structure and phase transitions of nucleus and strong interacting matter briefly.
简要回顾了原子核和强相互作用物质的相结构及相变研究的现状。
The nitride layer was formed on the surface of ductile cast iron by gas multi-element penetration, and the phase structure and section appearance of nitride layer were analyzed by the XRD and SEM.
球墨铸铁经过气体多元共渗后可在其表面形成氮化层，通过X射线衍射和扫描电镜对渗层的相结构与形貌进行分析。
The phase structure of both powders and ceramics was cubic phase.
粉末和陶瓷体材为立方结构。
The sample's crystal phase, structure, morphology and the reaction process were characterized and analyzed by using X-ray diffraction(XRD), transmission electron microscopy(TEM).
采用X射线衍射（XRD）、透射电子显微镜（TEM）分析手段对样品的物相、结构、形貌进行了表征和分析。
The sample's crystal phase, structure, morphology and the reaction process were characterized and analyzed by using X-ray diffraction(XRD), transmission electron microscopy(TEM).
采用X射线衍射（XRD）、透射电子显微镜（TEM）分析手段对样品的物相、结构、形貌进行了表征和分析。
应用推荐