The study of this thesis provides an effective method for real-time intelligent control of PET process.
本文所研究的结果为聚酯过程的实时控制提供了一套有效的控制方案。
In the present paper, recent development in fluorescence molecular switches based on PET process is reviewed, and its potential applications are proposed.
介绍了基于PET过程的开关型荧光传感器研究现状，展望了此类研究的发展趋势。
"We need to develop new process technologies, and HMF is a building block that can replace products like PET, a plastic used for soda bottles," he notes.
“我们需要开发新的加工技术，羟甲基糠醛还是一种建筑材料，能够代替例如聚对苯二甲酸乙二酯(PET)这种制作可乐瓶子所需要的塑料，”他指出。
It's optimal for a pet to start the process before you bring him home, since the critical socialization period is early in life.
因为最适合交际的阶段比较早，所以，宠物在进入家门之前就该经历这样的过程。
If so you can get the vaccination records from them, and reunite the pet to its owner in the process.
如果有，那么你就能从他们那儿得到免疫记录，并能在此过程中送这只宠物与其主人团聚。
Rather, start the process early on so that your pet will be comfortable with the changes when that big day arrives.
相反，启动过程的早期就使你的宠物将舒适与变化时的大日子来临。
Have a helper hold your pet, if necessary, while you complete the paw-printing process.
有必要的话请找个帮手帮你按着你的宠物。：D这样你就完成了这一步了。
And this method can be applied to evaluate the product viscosity and process control during producing the PET chips for DSP industrial fiber.
本检测方法完全可作为DSP工业丝用聚酯切片生产的过程控制和产品检验的粘度评价方法。
A new production process of modified PET product was provide.
提供了一种改性聚酯产品的新生产工艺。
The vacuum system process of PET unit, the design of EG steam ejector shape and support, the selection of support spring and the main points in the ejector pipe design are introduced.
介绍聚酯装置的真空系统的流程、乙二醇蒸气喷射泵的外型型式设计、支座设计、支座弹簧选择及乙二醇蒸气喷射泵配管设计中的要点。
Methods the CF iterative algorithm was applied to update the noisy detected emission sinogram data using the latest reconstructed image in the iterative process of PET reconstruction.
在PET重建的迭代过程中，此种负反馈迭代算法利用最近的一次重建图像来更新有噪声的探测到的发射正弦图数据。
Breaking process of PET fibers is discussed through analyzing changes of surface morphology of PET fibers in this paper.
本文通过研究聚酯纤维表面形态结构的变化来探讨聚酯纤维的断裂过程。
PET polycondensation process is controlled by the chemical reaction even if in the high vacuum stage by the sufficient stirring.
在有效搅拌条件下，三种催化剂在高真空阶段仍有较高的催化活性，过程是化学反应控制的。
Woven products: PET network, nylon network management, expansion sleeve, green network, round picture tube fiber optic cable woven wire, copper braid shielded cable, and professional Weaving process.
编织产品：PET网管、尼龙网管、扩充套管、环保网管、圆型彩管、光纤电缆编织线，铜编织网管以及专业屏蔽网线编织加工。
The distinct ways of forming PET/PA composite and sea-island ultra-fine fiber are discussed, as well as distinct techniques in peeling process are introduced.
通过论述涤锦复合超细纤维和海岛型超细纤维成纤方法的不同，介绍了两种超细纤维的不同开纤剥离工艺。
By analysis of the production of polyethylene terephthalate (PET), the adjustment and effect of esterification process using purified terephthalic acid (PTA) purchased outside were discussed.
通过对聚对苯二甲酸乙二醇酯(PET)生产的分析，论述了当使用外购精对苯二甲酸(PTA)时，酯化工艺的调整及效果。
The equipment, producing process, technical parameters and the result analysis were introduced. It showed that the preparation of cotton type polyester staple was feasible by using waste PET.
文章介绍利用废弃聚酯生产棉型涤纶短纤维的可行性，生产设备工艺流程，工艺参数选择与效果分析。
The quality index of PET staple fiber was defined according to production process and technical parameters of roofing felt.
根据油毛毡基布的生产工艺和技术指标确定涤纶短纤维的质量指标。
The experimental results showed that Med-high boiling rate PET FDY can be obtained by partial innovation of the machine and process adjustment.
实践表明：通过对设备的局部改造和适当的工艺调整，可生产中高沸水收缩率涤纶FDY。
The molecular structure of PET/CDP, dyeing properties, dyeing condition and dyeing process were introduced.
对PET/CDP分子结构、染色特性、染色条件、染整工艺进行了讨论。
The production process of different PET profile yarn was studied in this paper and the relationships between morphology and property of the profile yarn of different degree of profile was discussed.
对不同聚酯异形丝的生产工艺进行了研究，探讨了不同异形度异形丝的形态和性能之间的相互关系。
The crystalline process of HDPE was obstructed and restricted by PET.
HDPE的结晶过程受到了PET的阻隔、约束作用。
Thesis introduce the method which manufactured full dull PET by injecting master chip, by discussing the parameter chosen and control in process.
本文主要从工艺设定和生产控制的角度，对于母粒法生产全消光品种进行了探讨。
The formation and the change of crystallinity, orientation and super structure of PET fiber during the spinning process were investigated by mean of FRS XRSA, SAXS and DMA.
应用FRS-XRSA、SAXS、DMA等研究了涤纶短纤维在纺丝及后处理过程中的结晶、取向与超结构的形成与变化。
The microstructure model to explain how PET filament self - elongate and process condition of PET self-elongation filament were discussed.
探讨了PET纤维自伸长的微观结构运动模型和聚酯自伸长纤维的加工工艺条件。
The pet food processing wastewater is treated by hydrolysis contact oxidation air flotation process.
介绍了水解接触氧化气浮工艺在宠物食品加工废水中的应用。
The influence of such factors as temperature. pressure and molds on the product quality in the molding process of PET blowing bottle was inquired.
探讨了PET吹塑瓶成型工艺中温度、压力及模具等因素对制品质量的影响。
The spinning process and modification methods of EDDP easy dyed modification PET fiber are introduced.
介绍易染涤纶EDDP的生产过程及工艺改进方法。
This Paper introduces a new synthetic process of UP resin with waste PET, and the properties of the UP resin are also discussed.
介绍由废pet合成不饱和聚酯树脂的工艺，并对树脂的性能进行了讨论。
This Paper introduces a new synthetic process of UP resin with waste PET, and the properties of the UP resin are also discussed.
介绍由废pet合成不饱和聚酯树脂的工艺，并对树脂的性能进行了讨论。
应用推荐