The raw materials, production process and technical specification of this high performance coatings have been described.
介绍了该高性能防腐涂料所用的原料、制备工艺和性能指标。
However, after removing the rust back to the shelf plate prone to be wet with a special coating rust paints, performance coatings in general have a greater impact on the coating.
但除锈后的货架钢板易返锈，须涂装专门的带湿除锈涂料，对一般性能涂料的涂装有较大影响。
Setting the application performance requirements of coatings, which could make customers directly know the thermal insulation performance, and make comparison between different products.
设定了隔热涂料的应用性能指标，使得用户能够直观的了解产品的隔热性能，并可迅速的对不同产品进行比较。
The influences of zinc oxide crystal whisker, fumed silica and coupling agent on coatings performance were discussed.
讨论了导电氧化锌晶须、气相二氧化硅和偶联剂对涂料性能的影响。
Using proprietary technology, processes, and coatings, we produce films that achieve the highest levels of optical precision, with quality performance guaranteed.
我们利用专有技术，工艺，涂料，生产出高质量性能保证的窗膜，能够达到最高的光学精密水平。
The research on the dispersibility and stability of PVDF shows that the solvent system and modified resin have greater influence on the performance of the coatings and film.
通过对PVDF树脂分散和稳定性的研究，溶剂体系和改性树脂对涂料和涂膜的性能有较大的影响。
Deposition of carbide ceramic coatings by the HVAF spraying process enables wear performance of drawing pulley-rings to improve greatly.
采用高速火焰（HVAF）喷涂工艺制备金属碳化物陶瓷涂层，使拉丝轮圈的耐磨性能大幅度提高。
The results indicate that the composite coatings prepared by the orthogonal test process show good comprehensive properties performance.
结果表明，采用正交法得出的工艺参数进行刷镀，复合镀层的综合性能良好。
The performance, pretreatment method, coatings categories, technical specification and finishing process for ABS plastics are described.
阐述了ABS塑料性能、预处理方法、涂料品种、技术指标和涂装工艺。
The development, factors of formulation design, basic formulations, performance indexes and applications of waterborne mastic anti-rust color coatings are introduced.
介绍了水性彩色厚浆防锈涂料的研制、配方设计因素、参考配方、性能指标及施工方法。
The influences of amount of conductive fillers, graphite and solvent on the coatings performance were discussed.
讨论了导电填料、石墨和溶剂用量对涂料性能的影响。
The high modulus potassium silicate solution as the binder of the coatings shows great influence on the performance of liquid coatings and coatings film.
影响硅酸钾富锌涂料和涂层性能的因素很多，其中粘结剂的模数是一个重要的影响因素。
The performance of coatings not only relies on formulation and molecular structure of polymer binders, but also the film - forming process.
涂料的性能不仅取决于涂料的配方和其中聚合物的分子结构，而且与聚合物的成膜过程密切相关。
The mechanism and results for introducing anti-oxidants in powder coatings were described. The results were shown that the performance of powder coating is upgraded.
论述了抗氧剂应用于粉末涂料中的作用机理及试验结果，表明对提高粉末涂料的性能有很大促进作用。
This article presents the technical performance index and the use in all fields of PVDF fluorocarbon coatings with good weatherability and corrosion-resistance.
PVDF氟碳涂料具有优异的耐候性和良好的耐腐蚀性，介绍该涂料的技术性能指标及在各领域中的应用。
The influence of pH value of dilatant fire retardant coatings for steel structure on its fireproofing performance is studied by using a micro electric furnance.
通过微型电炉实验，研究了膨胀型钢结构防火涂料的酸碱性对其防火隔热性能的影响。
The obtained CIPP can be used to replace chlorinated polyvinyl chloride and chlorinated rubber for various corrosion protection coatings with excellent corrosion protective performance.
该氯化等规聚丙烯可代替过氯乙烯、氯化橡胶用于各种防腐涂料，所得防腐蚀涂料具有良好的性能。
Introduces performance of app modified bitumen waterproofing coatings and its application in toilet waterproofing.
介绍了APP改性沥青防水涂料的性能特点和用于厕浴间防水时的施工工艺。
The influence of content of para-tertiary butyl phenol on solid and performance of coatings is investigated.
考察了对叔丁基酚含量对固含量和涂料性能的影响。
This paper reviews the application of modified epoxy resin in anticorrosion coatings and the trend of high performance.
综述了改性环氧树脂在防腐涂料中的应用及高性能化的方向。
The introduction of silicone composition to the powder coatings improves some properties and performance of the cured film especially in the thermal stability and weather resistance.
有机硅组分的引入可以改善和提高粉末涂料涂膜性能，特别是耐候性及耐热性能。
This article describes briefly the preparation technology and the main performance of waterborne high temperature anticorrosion coatings.
简述了水性高温防腐涂料的制备工艺及主要性能。
This paper studies the influence of different application technology on film performance of PU coatings and PE coatings by comparison.
试验通过将PU涂料与PE涂料按照不同的施工工艺进行施工比较，研究不同施工工艺对最终涂膜性能的影响。
This paper has briefly discussed the factors that influence the performance of coil coatings film, such as t bend, MEK resistance and adhesion, etc.
简述了影响卷材涂料T弯、耐mek性、附着力、铅笔硬度、耐沾污性等性能的因素。
In comparison with the coatings applied presently for aircraft structures, the nano-composite coatings showed better anti-aging performance to UV radiation.
与现役飞机涂层相比，纳米复合涂层的抗紫外线老化性能有明显改进。
Performance characteristics of GK-570 resin was introduced. The application example of the resin in coil coatings was emphasized.
介绍了GK- 570树脂的性能特点。着重阐述了该树脂在卷材涂料中的应用实例。
This paper described the coatings and film performance of gold-imitative cathodic electrophoretic coating and spraying coatings, which were suitable for decorative parts of automobile.
介绍了适用于轿车装饰件生产的仿金阴极电泳涂料、仿金喷涂涂料及涂层性能。
The effect of the dielectric coatings on semiconductor laser performance is presented.
简要叙述了介质镀膜对半导体激光器性能的影响。
The effect of the dielectric coatings on semiconductor laser performance is presented.
简要叙述了介质镀膜对半导体激光器性能的影响。
应用推荐