For the recent decades, the pseudo static method, the response-spectrum analysis, time-history analysis, performance-based design method, spring out early or later.
几十年来，先后诞生了拟静力方法、反应谱方法、时程分析方法、基于性能的设计方法等抗震设计方法。
At the same time, precise structure elastic-plastic analysis method created advantage for the performance-based design method, an advanced aseismatic design method.
同时，精确的结陶弹塑性分析方法也为先进的抗震设计方法——性能抗震设计法创造了有利条件。
In this paper, the application of direct displacement-based design method which is the most representative performance-based design method for the shear wall structure will be studied.
本文对基于性能的抗震设计方法中最具有代表性的直接基于位移的设计方法在剪力墙结构中的应用进行了研究。
As widely application of FEA in product design and performance, the finite element method is used to analyze the structure of nebulizers based on the piezoelectric coupling theory.
基于有限元方法在产品设计和性能分析中的广泛应用，根据压电耦合有限元分析理论，对雾化器结构进行了深入的分析。
In this paper, a design method of parallel computing software library based on performance predict technology is provided, it is a promising way to hide the detail of parallel computing.
为方便用户使用并行软件库，该文提出了一种基于性能预测技术来开发并行计算软件库的方法，这是一种隐藏并行计算细节的有效途径。
This paper analyzes quantitatively, based on paired echo principle, distortion performance of linear FM signal by method of computer analogous design.
本文基于成对回波原理，采用计算机模拟设计的方法，定量地分析了线性调频信号的畸变特性。
A method to handle hash collision with dual chain was introduced, and its affection on performance was analyzed, The design and implementation was given based on network processor IXP2400.
介绍了用两条链处理哈希表冲突问题的方法，分析了它对性能的影响，并以网络处理器IXP2400为例给出了具体设计和实现。
This paper illuminates the performance and the method of secondary development of software CATIA, and generalizes the parametric design methods of parts modeling based on CATIA.
本文阐述了CATIA软件的二次开发性能和二次开发方法，总结了基于CATIA的零件模型的参数化设计方法；
To enhance the performance of dynamic systems, a design method of robust output-feedback controller based on the linear matrix inequality technique was proposed.
为提高动态系统的性能，提出了一种基于线性矩阵不等式技术的鲁棒输出反馈控制器设计方法。
The method consists of two parts: aerodynamic performance calculation based finite blade vortex theory and aerodynamic optimization design based genetic algorithms.
该方法分为两部分：基于有限片桨叶涡流理论的气动性能计算和采用遗传优化算法的优化设计。
On the basis of these analysis, theory and method of direct damage performance-based capacity design is presented in this paper.
在此基础上，本文采用直接基于损伤性能的能力设计方法来实现基于性能的设计。
The off-design performance of a new type of heat pipe radiator was studied based on experimental method.
本文采用实验方法对一台新型热管散热器进行了变工况性能测试研究。
The paper introduced the ventilation performance testing based on computer aided data processing system, which included designing method, menus and programme design.
介绍了通风性能试验计算机辅助数据处理系统，包括设计思想、界面说明、程序设计。
The design method of a performance test system of automobile water pump based on configuration software is introduced.
介绍一种基于组态软件车用水泵性能测试系统的设计方法。
By analyzing factors impacting upon the embedded system performance, an embedded system design method based on thread ideas is used, performance is improved with instruction level parallelism.
通过分析影响嵌入式系统性能的主要因素，采用了基于线程概念的嵌入式系统并行设计方法，利用指令级并行来改善系统性能。
The intelligent method based on performance feedback and parameter self-tuning controller based on rules have been proposed, which simplify the design of intelligent fuzzy control algorithm.
提出了性能反馈的智能控制方法和基于规则的控制器参数自调整机制等智能控制策略。并简化了智能模糊控制算法的设计。
This paper describes the composition, the principle, the design method and the performance analysis of a single chip microcomputer-based system for automatic vertical guidance of ranging drum shearer.
本文阐述利用单片微型机控制的采煤机滚筒自动垂直导向系统的组成、工作原理、设计方法和性能分析。
This method is one of the void design procedures based on the road performance. The test results show that the bituminous mixture designed by this method has a good road performance.
这种方法是基于沥青混合料路用性能的体积配比设计计算方法，经室内路用性能试验验证，用本方法设计的沥青混合料具有优良的抗滑性能、防水性能、抗车辙能力。
Based on this, this article has carried on the discussion to the underground composite construction dynamic performance and the underground structure design method, the main content is as follows.
基于此，本文对地下复合结构的动力计算方法和地下复合结构的动力特性进行了探讨，主要内容如下。
The theory and method of performance-based seismic design and the problem when it used in irregular structures were discussed in the text.
在阅读大量文献的基础上对结构基于性能的抗震设计在理论和方法以及在不规则结构中存在的问题进行了探讨。
In order to enhance the anti-interception performance of modulation-hopping technology, a method to design wide-gap chaos modulation hopping pattern based on time of day(TOD) is proposed.
为增强调制跳变技术的抗截获性能，提出一种基于时间信息（TOD）的宽间隔混沌调制跳变图案设计方法。
The design method and the desired performance based on optical fiber technology are presented.
描述了基于光纤传感技术的叶尖定时传感器的设计及其性能。
This paper studies reliability - based damage performance design of structures with load and resistance factor design method.
本文基于现行抗震规范设计方法，运用荷载抗力分项系数法对结构损伤可靠度进行了研究。
Based on exhaustive algorithm, a new algorithm is presented as detectors generating method in the negative selection model, including its design, performance analysis and experiment.
研究的重点是负选择模型中初始检测器集的生成算法，在穷举法的基础上提出了一个新的检测器生成算法，包括算法的设计、性能分析和试验。
A method of performance-based fire protection design is used to evaluate the security, reliability, rationality and economy of this system.
北京奥林匹克公园地下交通联系通道非常复杂，采用性能化防火设计方法有利于促进消防系统安全可靠、经济合理。
To efficiently evaluate design reconfigurable machining system performance such as quality, a model-based method was proposed to predict part dimensional variations.
为快速评估不同构型的可重构加工系统中零件的质量，提出了一种基于误差传递模型的尺寸偏差预测方法。
This paper reviewed a series of items, such as the concept of performance based design, the framework system of performance based design, and the evaluation method, etc.
本文综述了性能化设计的概念，性能设计的框架体系和评估方法等问题。
Consequently, a method based on the least squares approximation is advanced to support variant design, so that the trade-off between product performance and cost can be achieved.
其次给出了一种基于最小二乘逼近的产品变型配置设计方法。利用模拟退火算法得到了符合客户个性化需求的最优变量配置方案，即产品的性能和成本之间的平衡点。
This paper established a method to research the characteristics of gear transmission system based on the design parameters of gear system, the dynamic performance of gear system can be estimated.
本文建立一个基于设计参数的非线性齿轮系统特性研究方法，能够评估齿轮系统的动态性能。
Finally, the performance-based seismic design method is proposed, including the classification of performance level of slopes, the definition of performance index and the seismic design method.
最后提出了基于性态的边坡抗震设计方法，包括边坡抗震性态水准的划分、性能指标的建立和抗震设计方法。
应用推荐