Another open question is whether customers will plump for dedicated video communication systems over those that also serve other purposes, such as a PC or a games console.
另一个明显的问题是：是否用户将选择专用视频通信系统而忽略另外提供其他功能的设备，比如PC机或游戏面板。
And then, the design of software in PC and communication protocol between PC and temperature logger are introduced.
然后，介绍了上位机软件设计以及上位机与温度记录仪之间的通信协议设计。
Cipher Card can offer cryptogram service to PC system and network security device to realize safe storage for files and secure communication for information on network.
加密卡可以为个人计算机系统、网络安全设备提供密码服务，以实现数据的安全存储和网络信息的保密通信。
With the use of KingView communication with single-chip, this design measures the analog signal and finally displays vivid image in PC.
利用组态王和单片机通信进行模拟量的测量，在PC上应用生动形象的画面进行显示；
The problem in the communication between DSP and PC based on RS-485 is presented, and the solution of common-mode disturbance and EMI which are generated by incorrect ground connection is stated.
DSP与PC机的通讯以RS-485为基础，分析了RS-485总线在组网过程中因地线的不正确连接引发的共模干扰和EMI问题，并提出了解决方法。
Through the CAN interface and PC-CAN adapter, we realize communication between the CAN node and the PC.
通过CAN接口与PC - CAN适配卡实现了现场测控点与工控机间的通讯。
The serial communication between DSP and PC based on GPRS has the advantages of simpleness, good practicability and high dependability.
基于GPRS的DSP与PC机串行通信技术具有简单、实用性好、可靠性高等优点。
The method carries out the wireless communication between the PC and active lap, by the conjugation of bluetooth module controlled by MCU via HCI and bluetooth module connected with PC via RS232.
该方法利用单片机控制蓝牙模块，采用基于HCI层的单片机对蓝牙模块控制的方法及PC机端通过RS232接口连接蓝牙模块互相配合，实现PC机与能动磨盘之间的通信。
PC and DSP can exchange data each other through RS-232C serial communication.
上下位机之间通过RS-232C串行通讯交换数据。
It focuses on Heat Sink, hi-tech communication connectors, PC connectors and Cable assembly.
公司主要生产散热器、通讯连接器、电脑连接器与线束装配等高级电子配件。
This paper presents the realization on serial communication of AT89C52 SCM and PC, including hardware structure and software design.
本文介绍了AT 89 C52单片机与PC机之间串行通讯实现，包括硬件结构及软件设计。
Realizing the data processing and analysis of the modern voltage transformer characteristic must solve the serial communication problems of the PC and DSP.
要实现对现代变压器特性试验仪的数据处理和分析，必须解决PC机和DSP的串行通信问题。
The hardware is constructed with embedded PC, communication card and field bus data acquisition module.
系统硬件采用了嵌入式PC、通讯接口卡和现场总线数据采集模块。
Hardware is designed based on portable industrial PC, data communication card and data acquisition card. Software is developed with virtual instrument development platform.
硬件采用便携式工控机、通信接口卡和数据采集接口卡，软件基于虚拟仪器开发平台开发。
An intelligent inducing ventilating control system of underground garage was composed of many inducing ventilating controllers, RS-485 communication network and PC monitor modules.
地下车库的智能型诱导通风控制系统由多个诱导风机控制器、RS- 485通信网络及PC监控模块组成。
Transmitting and receiving circuits and serial communication and control interface between PC and microcontroller are described in detail.
详细介绍了光发送、光接收电路和单片机与微机的串行通信控制接口。
EPP is an answer to the problem of high speed, bi directional data communication between PC and data collection and conditioning system.
增强型并行口接口协议解决了PC与数据采集系统间的高速双向数据通信问题。
The methods and program of communication between PC and PLC are presented in this paper.
介绍了如何实现系统中PC与PLC之间通讯的方法，并给出实例程序。
The design of the software includes three parts as following: the network communication between PC and controller, NAT9914 firmware and DLL (dynamic link library) program.
软件部分的设计共包括三大部分：PC机与控制器间的网络通信机制，NAT9914固件程序以及动态链接库程序。
This article describes a new hardware configuration for ADSP-2101 communication with PC, which allows you to develop and debug ADSP-2101 software for digital signal processing applications.
本文研究了一种新的ADSP—2101与PC通信的硬件电路，它能使您开发和调试您的数字信号处理应用软件。
This paper introduces a communication method for PC with NC which USES monolithic processor as communication interface.
本文介绍一种以单片机为接口的个人计算机与数控机床的通讯方法。
Through the communication between PC and RS-232 interface, a small testing system for industrial field can be directly formed controlled by computer.
通过RS- 232接口与PC通讯，可直接构成由计算机控制的小型工业现场测试系统。
This system is mainly made up of upper machine (PC), communication machine, detecting and controlling machine, the sensor of temperature, humidity and moisture.
本系统主要由上位机(PC)、通讯主机、测控分机、温度、湿度和水分传感器组成。
Simulation test is performed by communication between PC and ARM emulator to evaluate the function and performance of the video phone system.
通过PC机与ARM仿真板的通信对本文实现的系统进行了仿真模拟实验，对可视电话的基本功能和性能进行了测试。
A serial communication between the PC and MCU are designed.
设计了PC机与单片机之间的串口通信电路。
In hardware handling, realize the communication of PC and external hardware with serial communication.
在硬件处理中，用串行通信实现PC机与外部硬件的通信。
Through programming the com port of microprocessor realized the communication with PC.
通过单片机内部的串行口编程完成了单片机和PC机之间的通信。
And in the communication module, the system answers for communication between PC and CNC through the port communication and CNC equipment.
通讯模块通过串口通讯与数控设备通讯，负责上位机与数控器之间的通信。
IBM PC and single chip microcomputer communication hardware circuit, software interface and measure to improve reliability of communication.
IBMPC机与单片机通讯的硬件电路、软件接口以及提高通讯可靠性的措施。
IBM PC and single chip microcomputer communication hardware circuit, software interface and measure to improve reliability of communication.
IBMPC机与单片机通讯的硬件电路、软件接口以及提高通讯可靠性的措施。
应用推荐