Researched and developed a CNC card based on PC BUS.
介绍了一种基于PC总线的数控插卡。
The design of a practical virtual instrument based on PC bus is introduced.
结合实际例子详细介绍了基于PC总线的虚拟仪器的设计过程。
This Pepeer presents the design and preparation of one kind of intelligent temperature card based on PC bus. The directions for use are given.
本文系统介绍了一种基于PC总线的智能型温度控制卡的构成及控制算法的建立过程，说明了控制卡的用途及用法。
The hardware design is based on PC bus and standard interface, whose characteristics include flexible configuration, strong expansibility and etc.
本系统采用工业PC控制计算机控制，硬件设计以PC总线和标准接口为基础，具有配置灵活、方便，易于扩充的特点；
The LMU based on PC bus technology contains many data acquisition cards compatible with many kinds of sensors, performers and intelligent instruments.
该现场监测单元采用了PC总线接插板技术，内部配有多种类型的数据采集卡，能兼容较多类型的传感器、执行器和智能仪器；
MicroChannel Architecture is IBM's answer to the failings of its older PC bus, which is now referred to as the ISA (Industry Standard Architecture) bus.
微通道建筑学是IBM它的更旧的PC总线的失败的答案，它是叫作ISA(工业标准体系结构)的现在总线。
The article has introduced an automatic plate locating and cutting control system implemented by PC bus industrial computer and APC locating control model.
介绍了非计算机专业大学生计算机等级考试练习模拟自测系统的功能、特点、实施方案以及使用效果。
The entire system is composed of computer, PC bus interface card, decode instrument, video switches matrix, audio switches matrix, pan, lens and alarm control etc.
整个系统由微机、PC总线适配卡、解码器、视频切换矩阵、音频切换矩阵、云台镜头和报警控制等部分组成。
The 586 industrial control computer with PC bus is the primary computer and the secondary computer is combined with microcontroller, SIEMENS transverter and so on.
上位机为PC总线586工业控制计算机，下位机由单片机、西门子变频器等组成。
The method of data communication between PC bus industrial computer and MCS-51single chip computers in rubber vulcanization distributed control system is introduced.
介绍了硫化过程微机集散控制系统中PC总线工业控制计算机与多台MCS-51单片机为核心的硫化控制仪之间的多机通信的方法与实现。
Based on the PC bus computer system hard ware, the overall design of the hardware and software function of the quality control and data acquisition system is presented.
根据PC总线计算系统硬件，对数据采集与质量控制系统的硬件进行了总体设计。
This paper discusses a PC-NC system based on PC bus and some relevant key technologies, and presents a method of realization of dispatching real-time tasks in the software part of system.
讨论了一种基于PC总线的PC数控系统的结构及其有关的关键技术问题，并提出了该结构下数控系统软件的一种实时控制任务调度的面向对象实现方法。
According to the characteristics of program controlled interface in low voltage programmable power supply, the design principles of PC bus board in programmable power supply are described.
根据低压程控电源程控接口的特点，阐述了程控电源PC总线控制板卡的设计原理。
USB is a kind of novel PC bus criterion. With the quality of fast speed, convenience and low interference, USB is the most available communication interface of modern intelligence instrument.
通用串行总线(usb)作为一种新型微机总线规范，具有便捷易用、传输速率快、低干扰等特点，非常适合作为现代智能仪器的通信接口。
This paper describes the basic design principle of automatic measure and control system. Which is compatible with PC BUS standard. technology of error processing as well as feature of software design.
本文主要介绍PC总线标准兼容的自动测试、控制系统的基本设计原理、误差处理技术和系统软件设计特征。
Users connect the glasses to a PC via a 10-foot-long universal serial bus 2.0 cable.
用户可以通过10英尺长的通用的串行总线2.0电缆把眼镜连接到PC机。
PC designs today use a different bus to connect their various components.
今天的电脑设计使用了不同的总线来连接各种不同的部件。
Until recently, PC I/O couldn't outperform the general-purpose interface bus (GPIB) we've been using for decades.
直到最近，PC的输入输出设备做得最好的还是通用接口总线（GPIB），而它已经用了几十年了。
One kind of stepping motor control card based on ISA bus of PC which achieved multi-spindle linkage control is introduced, its principle and design of hardware construction and software are discussed.
介绍了一种基于PC机的IS A总线步进电机控制卡，实现多轴联动控制，讨论了其工作原理和硬件结构设计、软件设计。
The technology of USB is one new standard of industrial bus in PC system.
USB总线技术是PC体系中的一套全新的工业总线标准。
This is a big step forward from the days of juggling jumpers in an ISA bus PC.
这从在ISA公共汽车PC的变戏法的跳线开关的日子向前是大步。
Deep research into DSP technology and computer bus technology, design the hardware and circuit interface of PC and DSP.
深入探讨了DSP技术和计算机的总线接口技术，设计了PC及DSP的硬件电路接口。
According to the traditional PCs defect that the PCI bus forms the bottleneck of system communication, we propose the design of Parallel PC architecture for switching network centric.
针对传统的PCI总线结构形成系统通信瓶颈的缺陷，提出了以交换网络为中心的可扩展并行PC体系结构设计思想。
The hardware is constructed with embedded PC, communication card and field bus data acquisition module.
系统硬件采用了嵌入式PC、通讯接口卡和现场总线数据采集模块。
The image data from all cameras are transmitted to PC through USB2.0 bus in synchronous transmission mode for storing.
来自所有摄像机的图像数据通过USB2.0总线采用同步传输模式传送到PC进行存储。
The development and test platform based on PCI bus of PC, which is developed by us, is proposed.
报告了自主研制的基于PC计算机PCI总线的数字视频产品的开发测试平台。
Instrument hardware consists of local collection equipment, 485 bus and PC.
仪器硬件由现场数据采集装置、485总线和PC机组成。
PC and DSP exchange data using high speed static RAM and bus arbitration circuit and corresponding handshake signal is designed to ensure the correct reading and writing RAM.
PC与DSP的数据交换采用高速静态RAM，并设计总线仲裁电路及相应的握手信号，以保证PC与DSP双方对RAM的正确读写。
The host, upper PC connected with field bus or fiber network simultaneously, is responsible for searching the date of bottom devices.
上位机同时挂接现场总线或光纤网络，搜索底层设备数据。
The host, upper PC connected with field bus or fiber network simultaneously, is responsible for searching the date of bottom devices.
上位机同时挂接现场总线或光纤网络，搜索底层设备数据。
应用推荐