By adding a certain amount of preparation of the thixotropic paste resin.
加入一定量触变剂配制成的糊状树脂。
It is mainly applied to the PVC paste products and can be partly substituted for the paste resin.
主要用于聚氯乙烯糊制品中，可以部分取代糊树脂。
The invention relates to a glass fiber mesh and paste resin compound enhanced film and a production method thereof.
本发明涉及一种玻璃纤维网与糊状树脂复合增强薄膜及其生产方法。
The gelation of PVC paste is a process during which the plasticizer diffused into the particles of PVC paste resin.
凝胶化过程是增塑粘剂向PVC糊树脂颗粒内部扩散的过程。
Experiment results show that gas phase made silicon dioxide performs an important function in increasing the blowing rate of PVC paste resin.
实验表明，气相法二氧化硅对提高聚氯乙烯糊树脂的发泡倍率起着重要作用。
The double-component polyurethane sealant based on PVC paste resin used for sealing the joints be-tween PVC windows and concrete wall was studied.
研究以PVC糊树脂为基础、聚氨酯为增粘树脂的双组分塑料门窗与墙体接缝用填缝胶。
This article introduced that we confronted many problems when home-making automatic valve port packager for PVC paste resin and how to solve them.
介绍PVC糊树脂阀口自动包装机国产化过程中遇到的问题以及解决方法。
We offer special electric conduction paste and special conductive resin.
我们提供特殊的导电粘贴和特殊导电性树脂。
To the ground with much hollowing and holes, you should fill and repair it with epoxy resin paste or epoxy lacquer putty and then do the next operation.
对于有较多凹陷、坑洞地面，应用环氧树脂砂浆或环氧腻子填平修补后在进行下一步操作。
The flame retardant resin with good transmittance and the characteristics of small and viscosity of the cloth impregnated performance and suitable hand with the E-Paste Process with cloth production.
该树脂具有阻燃性和透光率较好的特点，并且粘度小，对布的浸渍性能好，适合手糊成型工艺与无碱布配合生产。
The PVC paste blending resin is a kind of suspension polymerized resin with spheric particle morphology, high apparent density and low oil absorption.
聚氯乙烯糊用掺混树脂是一种颗粒外观球形化、表观密度较高、吸油率低的悬浮聚合树脂。
The addition of blending resin can greatly decrease the visocity and dramatically increase the store stability of plasticized paste.
掺混树脂的加入，可以大大降低增塑糊粘度，显著提高贮存稳定性。
This resin has high mechanical strength and higher elongation, weathering good view of hand for the production of ordinary paste molded fiberglass products and decorative products.
该树脂具有较高的机械强度和较高的延伸率，通用性强，适合制作手糊成型的各种普通玻璃钢制品以及保丽板等装饰产品。
The curing reaction of epoxy resin, which is common used in metal conductive paste, was studied.
主要研究了金属导电浆料中常用的环氧树脂的固化。
In addition, the blending resin can increase the gelation temperature of plasticized paste and the latter went up with the increase of the former.
掺混树脂使增塑糊凝胶化温度升高并随掺混树脂的用量增加而增加。
The viscosity of fire-resistant PVC paste was remarkably influenced by the type of PVC resin and five-resistant components.
阻燃PVC糊中，糊树脂类型及阻燃性组分对糊粘度影响显著。
Solids are consumed during the deposition process. The components used are referred to as feed. Feed consists of a concentrated pigment paste and low-viscosity, milky-colored resin.
固体份在电沉积过程中被消耗，用作补充的组份称为补加漆料， 补加漆料包括高浓度的颜料浆和低粘度乳白色的树脂。
In plastic, metal, glass, ceramics, resin, wood, copper, aluminum, iron, zinc, nylon, fiber, acrylic, FRP, TPU, EVA products, such as materials transfer, paste.
可在塑料、五金、玻璃、陶瓷、树脂、木质、铜、铝、铁、锌、尼龙、纤维、压克力、FRP、TPU、EVA等材质的制品上转印、粘贴。
This paper introduces property, specifications, application, manufacture of paste-blending PVC resin. A suggestion in developing of the resin at home is put forward.
简要介绍了聚氯乙烯糊用掺混树脂的性能、规格、用途和制备方法，对国内掺混树脂开发中存在的问题提出了建议。
The color paste adopts red color or black color. The resin adopts white PVC aqueous resin. The white paper can be replaced by cloth or a plastic plate.
色浆采用红色或黑色的色浆，树脂 采用白色的PVC水性树脂，白纸可以替换为布或者塑料片。
This resin has high mechanical strength and higher elongation, weathering good view of hand for the production of ordinary paste molded fiberglass products.
该树脂具有较高的机械强度和较高的延伸率，耐候性好，通用性强，适合制作手糊成型的各种普通玻璃钢制品。
The addition ratios of paste and resin can be varied to modify the coating characteristics required by local operating conditions.
颜料浆与树脂的加料比例可以根据用户的工艺操作所需及涂膜特性的特别要求而加以调整。
The thermal resister of power LED is analyzed in this paper. Using the silver paste and epoxy resin as die bonding materials, two kinds of power LEDs are made.
分析了功率型LED热阻系统的构成，对采用银浆和环氧胶作为芯片键合材料的功率型LED热阻进行了对比研究。
The thermal resister of power LED is analyzed in this paper. Using the silver paste and epoxy resin as die bonding materials, two kinds of power LEDs are made.
分析了功率型LED热阻系统的构成，对采用银浆和环氧胶作为芯片键合材料的功率型LED热阻进行了对比研究。
应用推荐