Passive film of alloys was investigated with AES analysis.
用俄歇能谱aes分析了合金钝化膜的组成。
Original polymerization potential of aniline had related with the passive film of stainless steel.
不锈钢表面钝化膜影响苯胺聚合的起始电位。
The pitting critical potential of the fresh surface is lower than that of the surface covered by passive film.
去膜表面发生点蚀的临界电位低于膜覆盖表面发生点蚀的临界电位。
Influences of components in the passivating solution on film-forming rate and corrosion resistance of passive film we…
研究结果表明，采用该种钝化液获得的钝化膜油黑发亮，色泽均匀，耐蚀性及耐磨性好，附着力强。
It can improve the properties of the passive film, such as abrasive resistance, resistance to oxidation and lightness.
它可以提高镀铜层的表面抗氧化性能、耐磨性能以及光亮性。
The alkaline buffer solution reacts with the welding points to form a passive film on the surface of the welding points.
所述碱性缓冲溶液与所述焊接点反应而在焊接点表面形成钝化膜。
The passive film may be augmented by chemical treatments that provide an oxidizing environment for the stainless steel surface.
通过为不锈钢表面提供一个氧化环境的化学处理，钝化膜可以得到增强。
SEM showed that sample surface of passive film was grid, and crack was branch-type, and sediment on passive film was bloom shape.
扫描电镜显示，试样表面的腐蚀产物膜呈网格状，裂纹呈树枝型，腐蚀产物膜上的沉积物呈花朵状；
When SS systems are fabricated, the welding process destroys the existing passive film and compromises the metal's ability to ward off the corrosive process.
铬镍不锈钢系统建立后，焊接处理会破坏存在的钝化膜，并降低材料抗腐蚀的性能。
There are intergranular corrosion cracking in stainless steel, all of which have negative effects on the passive film on the surface of stainless steel plate.
还有不锈钢内部的晶间腐蚀开裂，所有这些，对不锈钢板表面的钝化膜都发生破坏作用。
By removing these soils from the metal surface and providing an oxidizing atmosphere, the passive film is allowed to form and the passivation is accomplished.
将金属表面的这些污物去除并提供氧化的环境后，就形成了钝化膜并实现了钝化作用。
Surface atoms and intergranular atoms of nc copper have high activity, and that the passivation ability and the dissolution rate of passive film are increased.
纳米晶铜表面原子和晶界原子具有更高的表面活性，钝化能力大大提高，同时钝化膜的溶解速度加大。
It showed that good anticorrosion is attributed to homogeneous amorphous structure of Ni-Mo-P alloy and protective passive film formed on the surface of alloy.
结果表明，合金结构的非晶态性和合金表面易生成耐蚀性优异的钝化膜，是分别使不同成分合金镀层耐蚀性优异的重要原因。
At the initial stage, the pitting cores are formed and the passive film is repaired continuously, which results in the inductive component in the electrochemical impendence spectrum.
在初始阶段，形成的点蚀芯连续被修复的钝化膜，这会导致在电感元件中的电化学阻抗谱。
The presence of exogenous surface contamination, including dirt, grease, free iron from contact with steel tooling, and so forth, may interfere with the formation of the passive film.
外生的表面污染，包括：尘土、油脂、来自钢铁加工的游离铁等等，可以影响到钝化膜的生成。
Chemical treatments, such as sodium dichromate solutions, may facilitate the more rapid formation of the passive film on a stainless steel surface already free of scale or foreign matter.
化学处理，例如重铬酸钠溶液，可以促进无氧化膜和杂质不锈钢表面的钝化膜更快速度的生成。
Adding proper amount of rare earth element can accelerate the formation of passive film, and eliminate the heterogeneity in the spraying layers, so the erosion resistance can be improved.
加入适量的稀土可以促进金属表面钝化膜的形成，并能减少异质相的存在，因而能有效地提高喷焊层的耐蚀性能。
The modeled results also show that the ability to simulate corrosion of materials with surface passive film to some extent depends on their corrosion kinetics process tested by experiments.
计算结果同时也表明，对于表面覆盖有钝化膜的材料的数值模拟，建立合理的流动腐蚀动力学模型是数值计算方法应用成功与否的关键。
Various measures were taken depending on whether acid circulated or not to keep the acid cooler in the safe area of anodic protection with a stable passive film and thereby lone service life.
针对停车期间酸是否循环提出不同的应对措施，以使酸冷却器位于阳极保护的安全区，确保钝化膜的稳定，延长设备的使用寿命。
How to predict the pit growth behavior by introducing pit growth kinetics is summarized, and some properties of passive film, such as semi conductive and electronic properties, are also discussed.
对如何通过研究铝的点蚀扩展动力学来预测点蚀扩展行为，同时对钝化膜的半导体性能、电子性能进行了概述。
In addition, the passive film guarantees the good appearance of the welding points, and simultaneously provides good reliability and high testability for electronic products having the welding points.
另外，所述钝化膜确保了所述焊接点具有良好的外观，同时提供了具有所述焊接点的电子成品好的可靠性以及高的可测试性。
Establishing a passive surface or film on austenitic SS is essential to maximize the corrosion resistance that the metals offer.
在铬镍不锈钢表面形成一个钝化的表面或膜是非常重要的，它可以将材料的抗腐蚀性提高到最大。
This paper describes the formation of double side and multilayer circuit, and embedded passive component using high function thick film printing technology.
概述了应用高功能厚膜印刷技术形成双面，多层电路和嵌入无源元件。
In early film treatments, such as "I Walked With a Zombie" (which drew on the plot of "Jane Eyre"), zombies were eerily passive rather than the crazed flesh-eaters of today.
在《与僵尸同行》（由《简•爱》中的情节改编）等早期影片中，令人恐惧的僵尸们均处于被动地位，而如今影片中的僵尸们却疯狂地捕食活人。
The key process technology of integrated thin - film resistor, capacitor and passive assembly was introduced.
介绍了国外集成薄膜电阴器、电容器及无源组件的关键工艺技术的研究情况。
The key process technology of integrated thin - film resistor, capacitor and passive assembly was introduced.
介绍了国外集成薄膜电阴器、电容器及无源组件的关键工艺技术的研究情况。
应用推荐