Speed of skin-pass mill is an important factor to affect precision of elongation control.
平整速度是影响延伸率控制精度的关键因素。
Skin pass mill is used to improve surface quality and mechanical properties of the coating.
本机组采用光整机的主要用途是改善镀层表面质量和机械性能。
ABSTRACT The setup of rolling parameters is key to producing of skin pass mill for good quality and high produce.
平整机生产过程中，合理地设定轧制规程是使平整生产能够达到优质、高产、低消耗的关键。
Speed control system of skin pass mill in Cold Strip Rolling Mill of Wuhan Iron & Steel Group Company is introduced.
介绍武钢冷轧厂平整机的速度控制系统。
The article describes the function, process and component of hot strip skin pass mill and makes comparison with cold strip skin pass mill.
介绍热带钢平整的作用、工艺及设备组成，并与冷带钢平整设备做比较。
An advanced post coating treatment is adopted, including shape improvement by tension leveller, coating surface and mechanical property by skin pass mill.
采用先进的镀层后处理工艺，包括采用拉伸弯曲矫直机改善板形处理，采用光整机改善镀层表面和机械性能。
An advanced past coating treatment is adopted, including shape improvement by tension leveller, coating surface and mechanical property by skin pass mill.
采用先进的镀层后处理工艺，包括采用拉伸弯曲矫直机改善板形处理，采用光整机改善镀层表面和机械性能。
The article mainly describes the automatic elongation control system of steel strip in skin pass mill, including the measurement, calculation and control of strip elongation.
本文主要介绍平整机带钢延伸率自动控制系统，包括延伸率的测量、计算及控制。
The elongation control system of cold rolling skin pass mill was described; the speed feedforward control and feedback control in the control system were detailed explicated.
描述了应用于唐钢冷轧薄板厂平整机组的延伸率控制系统，对该延伸率控制系统中的速度前馈控制和延伸率反馈控制做了重点阐述。
MARE, a nonlinear finite element modeling of the tension device in the skin pass mill for hot strip was built. The accuracy and reliability of this model was proved by experiments.
MARE建立了平整分卷机组中张力装置的非线性有限元模型，通过实验验证，证明了模型的准确性与可靠性。
In the control system for skin pass mill elongation, the measuring devices in common use are pulse generator and laser velocimeter, of which the control accuracy of the laser velocimeter is higher.
在平整机延伸率控制系统中，常用的测量装置是脉冲发生器和激光测速仪。
Employees also look for a leader who knows when to pass on important company information, when to go to the next level with a concern, and when to crack down on the rumor mill.
雇员还希望领导知道什么时候传达公司的重要信息，惦记什么时候去找上一级领导，以及什么时候进行辟谣。
Employees also look for a leader who knows when to pass on important company information when to go to the next level with a concern and when to crack down on the rumor mill.
雇员还希望领导知道什么时候传达公司的重要信息，惦记什么时候去找上一级领导，以及什么时候进行辟谣。
The mill, consists of a 18-stands mill, 8-pass non- twisted block mill and a 4-pass sizing mill.
生产线由18架轧机、8道次无扭线材轧机和4道次定径机组成。
The rolling pressure on high speed untwist wire rod mill was measured firstly and succeeded internationally for optimizing technology, pass design, and management of the plant.
首次对高速无扭线材轧机粗轧机组压力进行测试并取得成功，为优化工艺规程、优化孔型设计及设备全过程的经济管理与改进提供了可靠的依据。
Mill automation is based on models with neural networks for pass schedule calculation and computation of set points for roll shifting and bending, and parameters for dynamic flatness control.
轧机自动化以神经网络模型为基础进行道次表、弯辊和窜辊设定点、以及平直度动态控制参数的计算。
The method and example of pass optimization design of high speed wire rod finishing mill by dynamic programming with minimum total tension coefficient are described.
阐述了以动态规划法按最小总张力系数对高速线材轧机精轧机组孔型进行优化设计的方法与实例。
By reformed the type of the entry sliding guide of round pass on continuous bar mill, the production accident of jamming is successfully prevented, and the productivity is increased.
通过改进棒材生产中圆孔型入口滑动导板的型式，成功地避免了生产中倒钢、卡钢等事故，提高了生产效率。
Based on the analysis of the conventional oval pass design of a stretch reducing mill and the design provided by W.
在对张减机椭圆孔型传统设计方法和西德所提供的设计方法分析的基础上。
Based on the features of rough mill, two-lever interative algorithm is used to calculate the pass schedule of rough rolling.
根据粗轧机组自身的轧制特点，采用内外两层循环迭代的算法来分配粗轧机组的轧制规程。
A serials of problems of miss position of roll, easy damage of guide and guard, scuff mark of piece were common during oval piece entering round pass by 2-h horizontal mill.
在用水平二辊连轧机轧制中，椭圆轧件进入圆孔型翻转时易出现错辊、导卫装置损坏、轧件划伤等一系列问题。
The characteristic of roll pass system in high speed wire mill was introduced, moreover, the deformation parameters and variation regular pattern of the roll pass were analyzed.
介绍高速线材孔型系统的特点，并对其变形参数及其变化规律进行分析。
Furthermore, the basic method for pass design of the mill is proposed.
提出了孔型设计的基本方法。
Materials, structure, roll pass machining, installation and cooling of cemented carbide roll rings in stretch reducing mill are introduced.
介绍了钢管张力减径机上所使用的硬质合金轧辊的材料、结构、孔型的加工和安装及冷却。
The rolling mechanism was studied in this paper. The rolling process and the design of pass of rolling mill were researched, meanwhile, the rolling pressure of Y-type rolling mill was also calculated.
本文从研究轧制原理入手，对轧制工艺及孔型设计进行了深入研究，给出了Y型轧机轧制压力计算。
The invention adopts a pass-free flat roller to replace a rough rolling pass roller of the prior art and realizes non-groove rolling of the high speed wire rod roughing mill group.
本发明用无孔 型平轧辊代替现有技术的粗轧孔型轧辊实现高速线材粗轧机组无槽轧制。
The invention adopts a pass-free flat roller to replace a rough rolling pass roller of the prior art and realizes non-groove rolling of the high speed wire rod roughing mill group.
本发明用无孔 型平轧辊代替现有技术的粗轧孔型轧辊实现高速线材粗轧机组无槽轧制。
应用推荐