Apply the weighted surface parameter equation to fit the algorithm of cavity lateral surface, and realize the cavity surface construction of radial parting mold of meridian tire.
采用加权曲面参数方程拟合型腔侧壁曲面的算法，实现了子午线轮胎活络模模具型腔曲面的构造。
Analyzed the influence of the plastic part injection molding process to part quality, introduced design of injection mold, mold parting structure design and mold temperature control design.
分析了塑件的成型工艺及模具注射成型对塑件质量的影响，介绍了浇注系统的设计，模具分型结构、模温控制的设计。
A new style automobile with the line main body-fuse box mold is introduced, state the mold structure, parting surface design, product ejection design and so on. practical mold structure is concluded.
介绍一新款汽车用线路主体——熔断器盒的模具，对其模具结构、分型面的设计、产品顶出设计等进行了阐述，给出实用可行的模具结构形式和设计方法。
The system is composed of the module of feature modeling, realization module of CBR-based mold parting surface design and help information module of the parting surface design.
本系统共分为三个模块，即特征造型模块、基于CBR的模具分型面设计实现模块和分型面设计帮助信息模块。
When you design this type of plastics mold, parting line must be designed according the Max silhouette curves.
当您设计这种类型的塑料模具，型线的设计必须根据马克斯轮廓曲线。
By analyzing the mold parting technique and the corrected skills of the plastic mold, give some reference to the technical staffs who take in the mold design.
分析塑料模的分模技巧及纠错方法，给从事模具设计的技术人员提供一定的参考。
So the research on the parting surface design technology and method is becoming one of the important facets in the field of the injection mold CAD.
因此，分型面设计技术与方法的研究，成为注塑模具CAD技术研究与开发的重要内容之一。
Heaping on the clamp force, makes the mold harder to "breathe" or vent, and over time, can permanently hob closed the vents on the parting line.
多余的锁模力，可能让模具无法“呼吸”或排气，周期超时等，对模具分模线的挤压。
Three-plate mold; Pointed gate; Mold ranging parting; Restricted ejector of fixed-die; Mold structure.
三板模；点浇口；模外定距分型；定模限位顶出；模具结构。
The improved design is increased in the fixed mold core, which change first parting into second parting and demould the inverted cone mandatorily.
该改进设计主要是在定模部分增加型芯，并将一次分型改成二次分型，再使倒锥部分实现强制脱模。
Highlights of the mold to live, to watch in the application of instant neat mold parting surface and exhaust slot, lest constitute exhaust bad.
对于高光模具的颐养，要留神在应用中即时整洁模具分型面及排气槽，免得构成排气不良。
An automatic parting surface generation approach in injection mold design was presented.
提出了一种自动生成模具分型面的方法。
Mold parting direction is an important factor to verify the moldability of a molded part and its determination is the first step to achieve automatic design of injection mold or casting die.
判定脱模方向是实现模具自动设计的第一步，也是评估塑件或浇注件能否模具成型的重要因素。
The practice proves that the method can be set up as a reference for other complex mold parting design.
实践证明该方法对其它复杂模具分型设计具有参考作用。
Injection mold parting techniques were analyzed, hoped it has a certain reference for injection mold designer.
分析塑料模的分模技巧及纠错方法，给从事模具设计的技术人员提供一定的参考。
The mold cavity was obtained by splitting mold base in parting surface.
模具型腔可采用分型面分割模板的方法获取。
In this paper, a new approach to automatically searching the parting line in injection mold design is introduced.
提出了一种自动搜索模具分型线的方法。
Mold Flow Analysis, Temperature Analysis, Fill Analysis, Pressure Analysis, Buckling Deformation Analysis, Structure Review, Parting Line, Fixed Mold, Moving Mold, Water Circuit.
模流分析、温度分析、填充分析、压力分析、翘曲变形分析、结构评审（初审、定型评审、终审）、分型线结构评审、定模结构评审、动模结构评审、水路分布评审。
Mold Flow Analysis, Temperature Analysis, Fill Analysis, Pressure Analysis, Buckling Deformation Analysis, Structure Review, Parting Line, Fixed Mold, Moving Mold, Water Circuit.
模流分析、温度分析、填充分析、压力分析、翘曲变形分析、结构评审（初审、定型评审、终审）、分型线结构评审、定模结构评审、动模结构评审、水路分布评审。
应用推荐