It is shown that the FEA parameter modeling can improve the efficiency of solving finite element analysis problems.
实例表明：参数化有限元建模能提高求解效率。
By ANSYS parametric design language, parameter modeling and mapped meshing of large scale Marine helical gears are carried out.
阐述了利用ANSYS参数化设计语言进行大型船用斜齿轮参数化建模及映射分网的方法和具体的实现过程。
In the end, IPB simulation analysis software is developed and can realize parameter modeling, loading and extract valuable data from result database file.
文章的最后编制了封闭母线场域分析的仿真软件，实现了参数化建模，加载，并从结果数据库中提炼出有价值的数据。
Hence we derive the expression of fitting function and propose a new Q-value inversion method using non - linear parameter statistical modeling of seismic records.
为此我们导出了拟合函数表达式，提出用非线性参数统计模拟地震记录的方法反演q值。
On the basis of modeling, simulation and field test, proposed are the PID parameter setting range of the governor under the large grid operating condition, and the power control mode of the unit.
通过建模、仿真及现场试验，提出了机组并联于大电网工况下的调速器PID参数整定范围和应有的机组功率控制模式。
In this dissertation, networked information releasing technology was applied to part design in CAD system, brought forward a new three dimensional modeling method by networked parameter drive.
本文将网络化信息发布技术应用于CAD系统的零件设计，提出了通过网络化参数驱动建立三维模型的新方法。
The cutter's design method, including parameter design and modeling, stress analysis and calculating, finite element analysis and correcting was introduced in detail.
详细介绍了铣刀的设计方法，包括参数设计与建模、受力分析与计算、有限元分析与校正。
A new modeling and design method for the parameter optimization of the feedback control loop of switching regulators is presented.
本文建议一种开关调节系统控制回路参数最优化的建模和设计方法。
Based on building high definition log interpretation model, in this paper, the reservoir geological modeling techniques is used to stimulate reservoir parameter characteristics between Wells.
在建立高精度的测井解释模型的基础上，采用储层地质建模技术，模拟了井间储层非均质参数的变化。
Soil water retention characteristics served as a vital parameter in modeling water movement and chemical transport in unsaturated soil.
土壤水分特征曲线是模拟水分和化学物质在非饱和土壤中运移的关键参数。
The transfer function of the measuring platform system is set up by using mechanism modeling method, and the parameter is got by both academic analysis and experiment.
测试平台系统的传递函数通过机理建模的方法建立，通过理论分析与实验相结合获得各项参数。
The adaptive compensation term of the optimal approximation error is adopted to minimize the influence of the modeling error and the parameter estimation error.
并通过引入最优逼近误差的自适应补偿项来消除建模误差和参数估计误差的影响。
Based on the basic principle and modeling method of partial least-square regression (PLSR), establishing the mathematical model for parameter prediction of the steam turbine units.
根据偏最小二乘回归的基本原理和建模的基本思路，建立数学模型并将其应用于电厂机组的参数预测中。
The method of the uncertainty design using probability theory and credibility theory have been presented, which provides us with a useful modeling tool for random and epistemic parameter uncertainty.
综合应用概率论和可信性理论对随机和可认知混合不确定性参数进行建模，提出了基于概率论和可信性理论的不确定性设计方法。
To improve the performance of a force interaction system, it is necessary to understand the effect of respective parameter on the system through modeling and analysis.
为提高力觉交互系统性能，需要通过建模和分析来了解各参数对系统性能的影响。
This article has conducted the thorough research on the mathematics modeling, the measuring techniques and the operating mode judgment of the drilling typical parameter.
本文对钻井典型参数的数学建模、测量方法和工况判断进行了深入的研究。
Then, three safety modeling methods of human-machine system are introduced: probability logic method, Markov process method and random parameter function method.
然后介绍了用于人机一体化系统安全性建模的三种数据方法：概率逻辑法、马尔柯夫过程法和随即参数函数法。
Adopting the main key technologies including feature-based modeling, optimization of cutting parameter, layout of the cutters tracks etc.
主要关键技术包括参数化特征建模、数控加工切削参数优化、刀具轨迹规划等。
To know the gas-bearing condition in shallow stratum, it must do two main works: calculate the store parameter and modeling set and distinguish hydrous and gas.
要搞清楚地层的含气状况，则需要开展两方面的工作，即储层参数计算模型建立与含水含气性识别。
Then networked three dimensional modeling will be realized by parameter drive , and a proved model based on CATIA was provided .
并结合参数化驱动技术实现网络化三维建模，并基于CATIA平台给出了验证模型。
This work can provide material in retrieving the parameter of atmospheric aerosol and modeling polarized properties of the atmospheric aerosol scattering radiation.
此项工作为反演大气参数、建立大气散射辐射偏振特性模型提供素材。
In this paper, the dynamic modeling method and the linear statistical method are used to analyze the prior distribution of reliability parameter during reliability growth test.
运用动态建模方法对可靠性增长试验下可靠性参数的先验分布进行分析。
Furthermore, the software based on the modeling algorithm can be embedded into fermentation process control system, realizes fermentation process online modeling and state parameter online estimating.
此外，利用该算法编制的软件可以内嵌到发酵过程监控系统中，实现发酵过程在线建模与状态参量的在线预估。
Aimed at a parallel manipulator with three degrees of freedom translation, a method on dynamic modeling of parallel manipulator and parameter identification of its servo system is presented.
研究一种三自由度并联机构动力学建模及伺服系统参数辨识方法。
After studying on modeling theories of SVM and the parameter optimization of SVM, the Least Squares Support Vector Machines tool LSSVM.
在研究支持向量机的建模理论和参数优化方法的基础上，将最小二乘法支持向量机工具LSSVM。
The new parameter representing the nonuniformity of tip clearance is recommended, and the modeling approach for the nonaxisymmetry compressor is introduced.
首先介绍了表征机匣变形程度的新参数，进而引进了非轴对称压气机模型的建模方法。
The modeling and parameter designing system based on speed closed loop is discussed. The design example and the experimental result are also given.
对通用变频器和异步电动机组成的转速闭环变频调速系统，提出一种系统建模与调节器参数设计的方法，并给出了设计实例和实验结果。
The equivalent parameter model uses less parameters, but the selection of elements and their corresponding parameters plays an important role in this modeling method.
等效参数化模型使用较少的模型参数，关键在于物理元件及其力学特性参数的选取；
Through analysis of the sensitive parameter CN of the SCS model, the sensitivity of runoff modeling to DEM resolution is described from the perspective of slope change.
根据SCS模型敏感参数cn，从坡度参数变化角度分析了不同分辨率的DEM对流域径流量影响。
After comparing several common CAD modeling methods, the cubic parameter-spline curve is used to approach and interpolate discrete contour of usual and complicated rocket jet.
通过对几种常用的CAD造型方法的比较，对常用而复杂的喷管离散点型轮廓段的拟合插值采用三次参数样条曲线来完成。
应用推荐