A review of automatic technology in geometrical parameter measurement is presented.
回顾与展望几何量测量自动化技术。
And the parameter measurement method of PEPC electro-optical switch has been designed.
设计了普克尔盒开关特性参数的测量方法。
This method is an available approach for parameter measurement of near-infrared laser beam.
该方法可以作为近红外高能激光参数测量的有效手段。
It focuses on parameter measurement for constant acceleration overdamped coil type geophones.
研究恒加速度过阻尼动圈式地震检波器参数的测量方法。
A projectile's static parameter measurement system is designed with the research and the needs.
本文结合课题研究和实际项目需要,设计了弹箭静态参数测试系统。
Two-phase flow parameters measurement is a difficulty in field of industrial process parameter measurement.
两相流参数检测是工业过程参数检测的一个难点。
An energy prediction model was built based on spot investigation on energy usage and parameter measurement.
在对能源使用状况的现场调研、各类相关参数实地测试的基础上,建立能源预测模型。
The virtual signal generator has been used as signal resource of piezoelectric parameter measurement system.
该信号发生器已成功用作虚拟压电参数测量系统中的信号源。
A dynamic parameter measurement system for absorber of undercarriage based on decision-making control is presented.
介绍一种基于决策控制的半主动起落架减震器控制系统的动力学参数测量系统。
The measurement system realized a multi-parameter measurement, which can reflect the RBC deformability from many aspects.
系统具有多参数测量的特点,可从多角度反映红细胞的变形性。
This paper establishes piezoelectric smart module parameter measurement system by using software based on virtual instrument platform.
论文研究基于虚拟仪器平台,用软件构建压电机敏模块参数测量仪器系统。
The geometric parameter measurement and feature location of the face are the key technology in the application of the optical 3D measurement.
人脸几何参数测量和特征定位是光学三维测量在医学整形美容、三维人脸识别等方面应用的关键技术。
AD73360 is a programmable three-phase electrical parameter measurement IC chip. It is mainly used in industry ammeter and multi-input systems.
AD 73360是一主要适用于工业电表和多路输入系统的可编程三相电量测量ic器件。
The system has the features of flexible parameter measurement, automatic error correction and the parameters can not be changed by manipulator.
系统具有参数测量灵活,能自动纠错,操作人员对测量参数无法人为更改的优点。
This paper mainly introduces how to implement serial communication of a 8098 multicomputers system in parameter measurement of mixed phase flow.
本文主要介绍在间接式多相流变介质参数测量中,8098多机系统串行通讯的实现方法。
The monitor software based on fieldbus is designed for drilling parameter measurement and it applies the HART and CAN bus to the drilling system.
本论文基于现场总线技术开发了钻井参数测量的监测软件,将HART、CAN现场总线技术应用于钻井测量系统。
It also introduces typical structure and function of several geological parameter measurement sensors and logging sensors in LWD at the former base.
在此基础上,介绍了LWD的几种地质参数测量传感器和录井传感器的典型结构和功能。
The original orientation of the core in the formation can be obtained by magnetic cleaning test, magnetic parameter measurement and data processing.
岩样经一定步骤的磁清洗、相应的磁性参数测量和数据处理,可恢复岩样在地下的原始方位。
Parameter measurement for rubber absorbers on crankshafts is necessary in the design, manufacture and maintenance of some internal combustion engine.
曲轴橡胶减振器的特性测试是内燃机设计、制造和维修中必不可少的测试手段。
This paper analyzes, compares and studies several main methods of electrical-parameter measurement, then points out their advantages and disadvantages.
本文通过对现有电参量测量主要方法的深入分析、比较和研究,指出了各种电参量测量方法的优缺点。
The experimental system includes a vacuum simulation section, power supply section, propellent feed section, parameter measurement section and an arcjet.
试验系统包括真空模拟系统,供电系统,推进剂供给系统,参数测量系统和发动机本体。
The SLIM parameters have clear errors to the real values on the base of the RIM parameter measurement method because there are larger air gap and edge effect.
SLIM相对旋转异步电机(RIM)存在气隙大、边缘效应等,若采用RIM开路和短路试验方法,会给参数测量带来较大误差。
The problem of physical and mechanical parameter measurement in model is the main factor of restricting extensive application of similar simulation technique.
模型物理力学参数测量问题是制约相似模拟技术推广应用的主要因素之一。
A method of trace and parameter measurement for flying objects is discussed with the GPS and telemetering technique over the range of middle and far distances.
本文采用GPS定位与遥测技术相结合的方法对中远程飞行器轨迹测量进行了研究。
This paper describes the methods of automatic counting and parameter measurement by the technique in solid state nuclear detector as well as its main applications.
本文阐述了固体核径迹自动计数和参数测量的方法及其主要的应用领域。
Electrical capacitance tomography (ect) technique is a novel technique used in parameter measurement of multiphase flow and has a wide application prospect in industry.
电容层析成像技术是多相流参数检测领域中的一门新技术,在工业中有着广阔的应用前景。
Finally, space parameter measurement method based on feature point selection was designed to accurately measure the distance, Angle and volume of cutting motor structure.
最后,设计出基于特征点拾取的空间参数测量方法,实现剖切后发动机结构空间距离、角度和体积的精确测量。
Parameter measurement based on virtual instrument in pneumatic conveying can display curve of relation between energy consuming and its parameters, educing best combination.
基于虚拟仪器的气力输送能耗参数检测系统可显示能耗指标与其参数的关系曲线,并得出能耗最小时的最佳参数组合。
It plays a very important role on auxiliary medical Diagnosis and collecting information of pathological changes for parameter measurement of designated area in medical image.
对医学图像中指定区域的参数测量在辅助医生诊断和收集病变信息上有着重要的作用。
It plays a very important role on auxiliary medical Diagnosis and collecting information of pathological changes for parameter measurement of designated area in medical image.
对医学图像中指定区域的参数测量在辅助医生诊断和收集病变信息上有着重要的作用。
应用推荐