The results show that the error of this method less than 2%(parallel error)and the repeatability are well.
试验结果表明该方法的测试误差小于2%，有很好的重现性。
Command-line error: Invalid parallel port mapping.
命令行错误：无效的并行端口映射。
We present a parallel mesh adaptive finite element algorithm for numerical simulation of flows based on error estimation.
给出了一种流动数值模拟中的基于误差估算的并行网格自适应有限元算法。
The error analysis shows that the present indexing method seems to be available to the cases of the zone axis both parallel and inclined to the optical axis of SEM.
误差分析表明，本注释方法不但适用于晶带轴平行于扫描电镜光轴的情况，而且适用于晶带轴倾斜于光轴的情况。
Adaptive fuzzy controller was combined with PID controller to compose parallel control system, which was aimed at reducing static error and suppressing dynamic disturbance of the whole system.
其中直接自适应模糊控制器还与PID控制器一起组成并行控制系统来抑制系统静态误差和动态干扰。
In this paper, multiple output error feedbacks are introduced via the parallel decomposition of the plant transfer function in the internal model control system.
本文通过对被控对象模型的传递函数并行结构分解，引入多重输出误差反馈，并根据内模结构来设计系统控制器。
On the basis of QFT, a method for parallel control of QFT and neural network is presented, which consists of a QFT controller and a network controller used to compensate the dynamic error.
在QFT的基础上，提出了一种QFT和神经网络并行控制的方案，以QFT为主控制器，神经网络进行动态误差补偿。
This paper introduced the error sensitive index for evaluating the operating accuracy of parallel robots, which reflects the degree of the robot mechanism's solution for the original error.
本文引入了并联机器人误差敏感系数，它反映了机器人机构的解对原始误差的敏感程度。
In power system, it can excite partial parallel resonance or serial resonance, enlarge the harmonic wave, trigger relay protection system in error and disturb electric power energy metering equipment.
在电力系统，它可以刺激局部并联谐振或串联谐振，放大谐波，引发继电保护系统误差和扰乱电力能源计量设备。
In order to overcome the defect of algorithm error heredity backward, based on the extract algorithm, a parallel separate algorithm is designed.
为了克服提取算法误差向后遗传的缺点，基于该提取算法，设计了一种并行分离算法。
When 3-D measurement for large building is carried out, the parallel movement of laser and sensor is not needed, thus error source is reduced and accuracy is improved.
在进行建筑物等大目标三维测量时，不需激光器和传感器平行移动，减少误差来源，提高精度，方便可行。
A new parallel algorithm is also proposed for the head error correct (HEC) module, it can not only detect multi bit error but also correct one bit error.
提出了一种新的信头误码校正(HEC)并行算法，能检测到多个比特错误，并能纠正单比特错误。
Holes in parallel between the degree of error will affect the quality of the meshing gears.
孔系之间的平行度误差，会影响齿轮的啮合质量。
In this paper we briefly introduce some basic concepts of quantum computing which include quantum entanglement, quantum bit, quantum register, quantum parallel computing and quantum error correction.
本文简要地介绍量子计算的一些基本概念：量子纠缠、量子位、量子寄存器、量子并行计算和量子纠错。
The basic classification of parallel machine tool error and error sources which influence the precision of parallel machine tool were introduced.
介绍了并联机床误差的基本分类和影响并联机床加工精度的误差来源。
Parallel learning can be used in both the imitation and the trial-and-error models.
类似的学习，可用于双方模仿和试验和错误模型。
The paper presents an error averaging method, which is a parallel one essentially.
因此采用了具有误差均化作用的拼接方法，该方法本质上是一种并行的方法。
The selected conditions were in good agreement with the literatures , the relative error between two parallel results was less than 5% .
所选条件与文献吻合，平行结果的相对误差小于5％。
Based on forenamed knowledge, the paper designs a double-loop NPID excitation controller, which has parallel feedback of voltage and error of rotate-speed.
在上述基础上，本文设计了一个具有机端电压反馈和转速偏差反馈的双环非线性PID控制器。
The part contains a high-speed 18-bit samplingADC, an internal conversion clock, an internal reference buffer, error correction circuits, and both serial and parallel system interface ports.
该器件内置一个高速18位采样ADC、一个内部转换时钟、一个内部基准电压缓冲、纠错电路，以及串行和并行系统接口。
Traveling wave dispersion in the parallel line is more complex than that in the single line and is an important reason why the fault location error is large for traveling wave method.
行波色散是造成故障测距误差大的重要原因：利用行波故障定位时要考虑采用多相行波数据。
In this paper analyses the fundamental method for count the locus parameter and error of approximate parallel line segment on the gear and five link mechanism.
分析了齿轮五杆机构直线段轨迹参数计算和误差分析的基本方法。
It contains a high speed 16-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and both serial and parallel system interface ports.
它内置一个16位高速采样adc、一个内部转换时钟、一个内部基准电压源(和缓冲)、纠错电路，以及串行和并行系统接口端口。
It has multiple sets of parallel versions, and the results should be using special statistical methods to reduce error and learning effects of testing.
测评结果的评价应使用特殊的统计学方法减少测验误差和练习效应。
The error of the frame and the trail which make the crane not in parallel with the rail track is the cause of off-tracking.
在实际治理啃轨现象的工作中，一般是以提高车架和车轮的安装精度，校正和消除起重机和轨道的缺陷为主要方法。
An improved four-parameter DH model is used to deduce the double parallel-joint CMM measurement model. Error model of the double parallel-joint CMM is discussed based on the measurement model.
文中利用改进四参数DH模型导出平行双关节坐标测量机的测量模型，在此基础上建立该坐标测量机的误差模型。
An improved four-parameter DH model is used to deduce the double parallel-joint CMM measurement model. Error model of the double parallel-joint CMM is discussed based on the measurement model.
文中利用改进四参数DH模型导出平行双关节坐标测量机的测量模型，在此基础上建立该坐标测量机的误差模型。
应用推荐