This paper analyze the influence of grinding wheel surface characteristics and dressing on grinding roughness of surface.
本文分析了砂轮表面特性和修整对磨削表面粗糙度的影响；
The application of on-line surface roughness measurement technique on dynamic micro-wear study is introduced in this paper.
本文叙述了在线表面粗糙度检测技术在动态微磨损研究中的应用。
A new method for processing output of surface roughness optical fibre sensor by radial basis function (RBF) neural network is presented in the paper.
本文提出了以径向基函数(RBF)神经网络处理表面粗糙度光纤传感器输出信号的方法。
It is introduced that establishing surface roughness prediction model of lithium hydride turning by regression analysis method in this paper.
文章主要介绍了运用回归分析方法建立氢化锂车削表面粗糙度预测模型的方法。
Basing on that, the concrete means of three-dimensional surface roughness measurement is proposed in this paper.
在此基础上，文中提出了实现表面粗糙度的三维测量的具体方法。
The effect of load specimen surface roughness and test deviation amendment on microhardness of aeronautical noble metal (alloy) wires and sheets was studied in this paper.
研究了加载负荷、试样表面粗糙度及测量偏差修正对航空用贵金属（合金）丝材和薄片显微硬度测量的影响。
This paper investigates the life of diamond wire and effects of process parameters on the reduction of the wire diameter, warp and surface roughness.
研究了金刚石线的寿命及各切割参数对线径减少量、翘曲度、表面粗糙度的影响。
The effect of surface roughness on nitriding surface quality is also studied in this paper.
另外，也对表面粗糙度，氮化表面质量的影响作了探讨。
This paper is concerned with the principle of a non - contact optical instrument for measuring the surface roughness of a magnetic disk with an opto-heterodyne interferometer.
根据外差干涉计量术的原理，研制了非接触式的光外差干涉磁盘表面粗糙度测量仪。
In the paper, a new conception about equal errors and uniform roughness on whole surface is proposed.
针对这一问题，提出了全曲面等误差和均匀粗糙度加工的概念。
The effects of the grain size and grain gradation of styrofoam particles as well as the expendable polystyrene(EPS)forming tools on the surface roughness of EPS patterns were studied in the paper.
研究了泡沫聚苯乙烯粒径、泡沫颗粒的粒度级配、成型发泡模具对EPS模表面粗糙度的影响。
Through experiments of high speed lapping with solid abrasives, the effect of lapping pressure on machined surface roughness is studied in this paper.
本文通过实验研究了在固着磨料高速研磨中，研磨压力对工件已加工表面粗糙度的影响。
In this paper, the influence of diamond tool sharpness on machined surface quality was studied from the viewpoints of the cutting force, surface roughness and residual stress.
本文从切削力、表面粗糙度、表面残余应力几个方面，研究了金刚石刀具刃口修锐度对切削表面质量的影响。
The paper introduce the leakage influences factor of reciprocating rod seals; the roughness of the seal surface and the rod speed are the important parameter of seal leakage.
介绍了液压往复杆式密封是否发生泄漏的影响因素，指出密封表面粗糙度和杆速是决定密封是否泄漏的重要因素。
The variable regularity of surface roughness on diamond turned single crystal germanium and silicon was investigated in this paper.
本文研究了金刚石车削单晶锗、硅时表面粗糙度随切削方向的变化规律。
In addition, the influences of characteristic parameters of tools for glass cutting on machined surface roughness are presented in this paper.
本文还研究了玻璃切削刀具特征参数对已加工表面粗糙度的影响。
This paper investigated the possibility of measuring the surface roughness of wood by the laser displacement sensor of the computer control.
介绍了一种采用计算机控制激光位移传感器在线检测木材机械加工表面粗糙度的新方法。
In this paper the influence of wheel unbalance on the ground surface roughness is investigated in consideration of the disadvantages of dynamic pressure bearing.
本文从分析动压轴承的弱点出发，着重就砂轮不平衡量对磨削表面粗糙度的影响作了探讨。
This paper introduces surface roughness interferogram processing system and how to use it to measure surface roughness by computer based image processing technology.
介绍了表面粗糙度干涉图像处理系统和该系统以静态干涉图像处理技术对表面粗糙度检测的过程。
This paper presents a study of cutting surface roughness for different PCD tools having various tool geometries during machining Aluminum alloy.
文中研究了PCD刀具在不同的刀具几何参数下车削铝合金的加工表面粗糙度。
The Influence of three grinding fluids on grinding force, metal material removal rate, surface roughness of ground workpiece, and the extent of grinding bum were investigated in this paper.
本文研究了三种磨削液对磨削力、金属磨除率、表面粗糙度和烧伤程度的影响。
The factors and levels graph related to surface roughness of the parts was designed combining practical manufacturing in this paper.
结合实际生产情况，设计了与工件表面粗糙度有关的因素水平表。
It has been verified in this paper, by theoretical analysis with two-phase fluid mechanics and hydraulic tests, that decreasing surface roughness in a wade stack can not increase critical discharge.
本文通过两相流理论分析和水力学试验验证证实：室内排水立管管壁粗糙度的减小，不仅不能加大其临界流量，反而会减小其临界流量。
This paper analyzed the wood surface color, luster and roughness of 19 different species of HONGMU in 8 groups.
本文通过研究红木8类19个树种的木材材色、光泽度、粗糙度参数，分析了红木类木材视觉物理量的分布特征；
This paper designs a surface roughness measuring system based on single chip and optical fiber sensor.
设计了一种以单片机和光纤传感器为基础构成的表面粗糙度测量系统。
This paper describe advanced test method of surface roughness, corroding quantity can be used qualitative test and quantitative test. It describe also sharp test and reflectivity test for mirror.
本文阐述了先进的表面腐蚀量检测方法，对镜面进行定性和定量的腐蚀量检验，镜面面形和反射率的检验。
In this paper, the light scattering model and the statistical properties of the surface roughness are discussed.
文章讨论了光散射模型和表面粗糙度的统计特征。
In this paper, the light scattering model and the statistical properties of the surface roughness are discussed.
文章讨论了光散射模型和表面粗糙度的统计特征。
应用推荐