This paper introduced the electronic clock back of the injection mold design process.
本论文介绍了电子钟后盖的注射模设计过程。
Sand blasting or swirling the mold surface with sand paper might help. Product design approval required before making this change.
喷砂处理或用可能用到的砂纸进行涡旋模具。在生产前进行正式和必要的产品设计。
The Structure of Lining vane and safety board for slurry pump, compound property, formula, production technology, mold design, practical use and advantages are introduced in present paper.
简介泥浆泵衬胶叶轮和护板的结构，胶料性能、配方、生产工艺、模具设计、实际使用状况、优点等。
This paper introduced the manufacturing process of bore bit warm extrusion technology, main technological parameter and mold design process.
绍了钎头温挤成型工艺的研制过程、主要工艺参数的确定及模具设计过程。
A knowledge based injection mold design system (KIMDS) is introduced in this paper.
介绍了一个基于知识库的注塑模设计系统KIMDS。
The first successful application of CAD/CAM technology in plastic injection mold design and manufacturing in China and the technical and economic benefit are introduced in this paper.
本文介绍了在国内首次把CAD/CAM技术全面地应用于注塑模具的设计和制造过程，及其所取得的良好的技术经济效益。
This paper mainly performs the design and mechanical analysis and research on cold extrusion mold of the gear axis in cars.
本文主要对汽车用齿轮轴的冷挤压模具进行了设计和力学分析研究。
This paper introduce the management information system design from the business model analyzing, function mold piece analyzing, system construction designing, system function designing, etc.
本文从业务模型分析、功能模块分析、系统结构和功能设计等方面，提出了输电线路管理信息系统的开发设计思想和方法。
Theoretical basis for plastics mold design and plastics mold CAD and CAE technology were provided in this paper.
为塑料模设计和塑料模CAD及CAE技术提供了理论依据。
This paper introduced the military tactics airplane electronics equipments standard mold piece the design, being of great benefit to the design thought of the improvement electronics system.
本文将对战术飞机电子设备标准模块设计作简要介绍，对改进电子系统的设计思想是大有裨益的。
Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。
The paper introduces mold design keys and attentions of oblique gear made from plastics and oblique gear structure and mold design by analysis of example.
通过分析斜齿轮的结构特点并结合模具设计实例介绍了塑料斜齿轮模具的设计要点及注意事项。
This paper introduced the injection mold design of the Polyurethane elastomer.
介绍聚氨酯弹性体的注塑模具的设计。
This paper is a plastic injection mold design, plastic parts through the process of analysis and comparison, the final design of an injection mold.
本论文首要为一注塑模具设计，经过对塑件地工艺停止剖析和比拟，最终设计出一副注塑模。
This paper is concerned with the design of vacuum full-mold casting equipment. The processing properties of this equipment are also studied in this paper.
本文通过设计和选择真空实型铸造主要工艺装备，试验研究了所设计的真空实型铸造装备的工艺性能。
Simultaneous design and dynamical simulating model of plastic injecting mold have been studied in this paper and support to design good plastic injecting mold.
通过塑料注射模并行设计与动态模拟模型的研究，为高质量的塑料注射模具设计提供依据。
This paper described work principle and structure design of side cut punch composite mold and assembly testing requirements using the crank press machine.
介绍了在曲柄压力机上切边冲孔的复合模结构设计、工作原理及装配和调试要求等。
This paper introduces the experimental studies on the warpage of injection molded strip parts in the design of part structure and mold gate and the selecting of molding conditions and materials.
从制品结构和模具浇口设计、原材料和成型条件的优选诸方面对长条形注塑件翘曲变形进行了系统的试验研究。
This paper introduces reaction injection molding, including RIM equipment, materials, processing parameters, mold and product design etc.
主要介绍反应注射成型工艺、设备、材料、模具和制品设计等。
This paper reviews instruments used on major components of continuous caster beside mold, their effect on the design and operation of continuous caster and quality of slab.
介绍了除结晶器以外连铸机的主要部件上所采用的各种检测仪表，以及它们对连铸机操作及连铸坯质量的作用。
This paper discussed the design of plastic injection mould of one parts of Automobile Switch and its characteristics of the products for mold design.
本次设计进行了汽车开关一个零件的注塑模和其模具结构的设计。
In this paper, we present the design and implementation of a practically used glass mold CAD system.
介绍了一个实用化玻璃模cad系统的设计与实现。
The paper introduces the structure and design characteristics of the heat runner injection mold for one kind of beverage bottle parison tube.
介绍了一种饮料瓶坯管热流通注射模的结构及设计特点。
In this paper, we interpret a kind of ceramic absorbing-plastics mold, and discuss its material design and property and character of this mold. We also study the main point of the process.
本文研究了一种陶瓷吸塑模具，并着重阐述了陶瓷吸塑模具的材料、性能和特点以及该模具在制备过程中工艺路线和工艺要点。
In this paper, a new approach to automatically searching the parting line in injection mold design is introduced.
提出了一种自动搜索模具分型线的方法。
This paper discussed the design of plastic injection mould of the upper cover of the cable set mold. , and the process analysis of the parts' structures.
本设计进行了一款拉线盘的注塑模设计，对零件结构进行了工艺分析。
This paper discussed the design of plastic injection mould of the upper cover of the cable set mold. , and the process analysis of the parts' structures.
本设计进行了一款拉线盘的注塑模设计，对零件结构进行了工艺分析。
应用推荐