A novel idea of designing and applying linear state observer is presented in this paper to reconstruct the load disturbance for feed forward control in AC. vector control systems.
本文提出了在交流矢量控制系统中设计线性状态观测器的新思路，并以此重构出负载扰动作前馈控制。
According to the state this paper also analyses the design thinking, programming method and the programming step under the control of PC in one control section of the feed production line.
根据这一状况，还结合饲料生产线中的一个控制部分分析采用PC进行控制的设计思路、编程方法及步骤。
This paper presents a principal and subordinate control system for feed equipments. The control system is combined with a industrial control computer and a PLC.
本文设计了一种用于饲料生产设备的主从式控制系统，系统由工控机和PLC组成。
Combining the forecasting of machining dimension with that of process capability in a machining process, principle and method of feed-back compensative control is proposed in the paper.
将加工尺寸预测与工艺能力预测结合起来，提出对加工尺寸进行反馈补偿控制的原理和方法。
The paper introduces major circuits and programming method of numerical feed control system for grinder.
本文介绍了一种磨床数字进给控制系统的主要硬件电路及软件编程方法。
This paper applies a method of linear continuous variable feedback to the control of a kind of voltage collapses induced by reactive power changes, which only USES a single variable to feed back.
应用连续变量线性反馈对一类由负荷无功功率变化引起的电压崩溃进行控制，仅用单个变量即可实现。
This paper introduces the development of the servo control electronic yarn feed system and analyzes the warp knitting machine's let-off feedback deflection and the.
论文详细介绍了伺服控制的经编电子送经系统的开发过程及送经反馈偏差和停车横条与电子送经系统的关系。
The paper develops an automatic control system of walking velocity on combine based on feed quantity, and designs its hardware and software.
为此，介绍了一种基于喂入量的联合收割机行走速度自动控制系统，进行了该系统的硬件软件设计。
This paper provides a feasible control pattern, which improves quality of boiler feed water and effectiveness of corrosion prevention thus prolongs the period of service life.
为提高电厂锅炉给水品质，取得最好的防腐效果，延长机组使用寿命，提供了一个可行的控制方案。
The paper presents the control structure of a non_circular machining system which is based on linear motor direct feed drive.
分析了以直线电机直接驱动下的高频响伺服刀架为核心的非圆截面加工系统的控制结构；
The gray model forecasting theory and fuzzy control technology are introduced, and a new method based on gray model forecasting and fuzzy control of coal-feed in a jig is proposed in the paper.
本文对灰色预测理论及模糊控制技术进行了介绍，并提出了一种对跳汰机给煤量进行灰色预测和模糊控制的新方法。
This paper introduces a two-paralleled H-bridge topology and proposes a digital feed forward control scheme for the gradient amplifier.
本文介绍一种基于双h桥并联结构的梯度放大器的电路拓扑，并提出一种数字前馈控制算法。
On the base of feed-forward intelligent fuzzy logic control system prototype, this paper performs particular research and design to each constituent of this system.
本文在前馈式智能模糊控制系统原型的基础之上，对该系统的各个组成部分进行详细的研究与设计。
This paper presents a linearization control methods of nonlinear system, which is realized by feed forward controller.
提出一种对非线性系统用线性控制的方法，通过前馈控制器进行控制。
The paper delineates the special features of boiler feed water control and discusses the main problems pertaining to control systems.
该文阐述了锅炉给水控制的特点，并对给水控制系统设计的主要问题进行了分析。
This paper describes a new way for uniform feed automatic control and follow-up imbibition during milling.
叙述了压榨机组操作过程中实现自动均匀喂料和跟踪渗透的新方法。
Design on a novel generalized feed mechanism of a new type sewing machine and its control system is presented in this paper.
介绍一种新型缝纫机(八针电脑缝纫机)中广义进料机构及其电控系统的设计。
This paper focuses on effects of the valve characteristics and the transfer pipe delay on dynamic performance for boiler drum level, under varying valve opening of the feed water control valve.
本文着重探讨当给水调节伐门开度变化时，伐门特性以及管路传输迟延对锅炉汽包水位动态特性的影响。
The paper introduces the subject of using object feed forward compensation to improve the control capability of CINRAD on ship.
讲述了船站气象雷达采用目标前馈提高伺服系统性能的问题。
In this paper, the optimization design for self-adaptive control system of feed-forward neural network is proposed based on chaotic variable.
基于混沌变量，提出一种神经网络自适应控制系统的优化设计方案。
A precept of distortion control which USES harmonic notch feedback method is discussed in this paper. The control process is analyzed, and the feed-back arithmetic is given.
本文提出了利用谐波陷波法反馈方式进行失真度控制的一种方案，分析了控制过程，并给出了反馈算法。
In this paper, the control of combustion system in industrial oil boiler is discussed. The combustion efficiency is raised by using KMM instrument and feed -forward control system.
针对工业使用燃油锅炉的燃烧系统进行研究，利用K MM仪表，采用前馈控制系统，以提高锅炉燃烧效率。
This paper, in respect of nutrition, technology, storage, testing and hygiene etc., describes more detailedly the method of quality control of feed products and its importance.
本文从营养、工艺、储存，检测、卫生等方面，较详细地阐述了饲料产品质量保证的方法和重要性。
This paper mainly discusses the method that can realize multiple impulses in the feed setting system design of digital control lathe. This method can be adopted in the lathe design and reconstruction.
重点阐述了数控车床的进给系统设计时实现多脉冲的方法，该方法无论是设计机床或者是改造机床都可以采用。
This paper mainly discusses the method that can realize multiple impulses in the feed setting system design of digital control lathe. This method can be adopted in the lathe design and reconstruction.
重点阐述了数控车床的进给系统设计时实现多脉冲的方法，该方法无论是设计机床或者是改造机床都可以采用。
应用推荐