Methods the strains were isolated using gradient dilution and streak plate techniques and the activity was determined by Oxford cup method and paper disk method.
方法梯度稀释与划线法分离菌株，并利用牛津杯法和纸片法测定其抗菌活性。
This paper introduces a useful safety management system for disk files, its design principle and its implementation. A fundamental design method technical measures are described in detail.
本文介绍一个实用的硬盘文件安全管理系统的设计和实现，并对系统的主要设计思想及所采取的技术措施进行了较详细的讨论和说明。
This paper presents a new method to design the disk CAM with concave follower, and finds the relationship between the new kind of CAM and the formal ones.
找出了凹圆弧底直动从动件盘形凸轮与原有凸轮之间的区别与联系，并统一了原有凸轮的设计方法。
This paper recommends some maintenance method about bad track of hard disk on the basis of the writeris experience.
结合工作中积累的经验，阐述硬盘坏道的维修方法。
Manufacturing method of computer floppy disk liner for nonwovens is introduced simply in this paper.
本文简要地介绍了非织造布计算机软盘衬垫的研制方法。
In this paper, a computational method for coplanar disk-shaped cracks within an elastic infinite body is presented.
本文对于含有圆盘状共面裂纹群的无限体提出了一种计算方法。
This paper presents a new method to design the disk CAM with concave follower, and find the relationship between the new kind of CAM and the formal ones.
本文找出了凹圆弧底直动从动件盘形凸轮与原有凸轮之间的区别与联系，并统一了原有凸轮的设计方法。
In this paper, a model program has been established to investigate the amplified spontaneous emission (ASE) in the nd: glass disk amplifier with the Monte Carlo method and rays tracing.
编制了一套用蒙特卡罗方法计算钕玻璃片状放大器内自发辐射放大(ase)的模拟计算程序，考虑了光线在两大表面不同入射角对反射率的影响。
This paper explains the process for extracting data of seismic event, the method to develop and use the program which creating seismic event disk in the Data Management Center (DMC) of the new CDSN.
本文详细阐述了新一代CDSN数据管理中心提取地震事件数据的处理过程，及地震事件盘生成程序的研制与使用方法。
This paper is about the problem of segmentation of eyeground optic disk image, based on method of computer image processing.
本文研究了基于计算机图像处理技术的眼底视盘图像的自动分割方法。
This paper gives a method of combining experiment with theoretical calculus, which can be used to obtain the precious vibration mode functions of disk bladed of turbine machinery.
对透平机械常用的叶轮的固有振动问题给出了一种试验与计算相结合求取其精确振动模态函数的方法。
This paper presents a method for calculating heat conduction and thermo-elastic deformation of double-disk supported thrust bearing by means of ANSYS program.
介绍了ANSYS软件用于水轮发电机双托盘支撑推力轴承的热传导和热弹变形计算的方法。
This paper discusses the reflectance measurement of the magneto-optical disk using a comparison method, and describes the effects of the optical systems nonideal condition.
讨论了用比较法测量磁光盘反射率问题，重点分析了由于系统光路的非理想性对测试结果的影响。
K-B paper disk diffusion and broth quantitative dilution method in accordance to the NCCLS Standards were performed for drug susceptibility.
药敏试验应用K - B纸片扩散法和肉汤定量稀释法，按NCCL S规定的标准进行。
Analysis of fixed disk driverts common fault is introduced, and method of analysis and testing is also gi-venin this paper.
本文分析硬盘机的常见故障，并给出了分析和测试方法。
The predicting results by using the method presented in the paper are in close agreement with the experimental data and measured grain size of a GH4169 alloy disk forging.
应用该方法进行预测的结果与试验数据，和GH4169合金涡轮盘锻件的实测晶粒度一致。
This paper introduced the method of the discarded compact disk and polyester which was recycled at home and abroad.
介绍了国内外对废光盘、废聚酯的回收再利用方法。
In this paper the microstrip disk cavities are used as the resonators of microwave bandpass filters, and the design method for this kind of filter is given.
本文提出了利用微带圆盘腔作为微波带通滤波器的构想，并给出了这种滤波器的设计方法。
This paper discusses a method repairing destroyed floppy disk through low-level programming that accesses directly the basic data units.
探讨了一种通过低级编程直接读写软磁盘的基本数据单元修复损坏的软磁盘的方法。
The dynamic rigidity method applied to the multi-disk rotating systems is presented in this paper. The formula of dynamic rigidity to the boundary conditions with flexible support is derived.
本文介绍动刚度法在多盘转子系统中的应用，导出了有弹性支承边界条件的动刚度公式。
Software faults is the most common one of the stoppages to hard disk and often man - made Through. analysis so of the faults, this paper introduces method of handling faults by...
通过对故障产生原因的分析给出了故障处理方法并举例加以说明。
This paper presents a systematic method for the design of track seeking and following servo controller of high track density optical disk drive.
本文针对高轨道密度光碟机的寻轨伺服与定轨伺服控制问题，提出一个系统化的设计方法。
By analyzing relation between BEMF of the hard disk spindle motor and the rotate speed. This paper presents a new method of following the motor rotate speed by PLL to lock BEMF.
通过对硬盘主轴马达的反电动势与马达转速之间关系的分析，提出一种利用马达的反电动势信号跟踪马达转动速度变化，产生系统伺服写入时钟信号的方法。
In this paper, we study the thermal stability of the granular film quantum magnetic disk by using the damage spreading method.
利用损伤扩散方法研究了三角点阵量子磁盘的温度稳定性问题。
This paper presents a new method of form-grinding of involute gears, using a segment of involute curve produced by a smaller base circle disk to replace a desired involute curve.
本文采用较小基圆渐开线代替齿轮渐开线，创造出新的渐开线成形砂轮修整器。
According to the allowed pressure Angle, this paper determines the disk CAM with translating followers basic circle radius and eccentricity by using the analytic method.
基于解析几何法导出的最大压力角表达式，导出了偏心凸轮机构和对心凸轮机构的基圆半径和偏距的计算公式。
According to the allowed pressure Angle, this paper determines the disk CAM with translating followers basic circle radius and eccentricity by using the analytic method.
基于解析几何法导出的最大压力角表达式，导出了偏心凸轮机构和对心凸轮机构的基圆半径和偏距的计算公式。
应用推荐