This paper describes the methods of controlling the frame quality in terms of process design, mould design, control of deformation and defects from welding surface treatment, etc.
从工艺设计、胎具设计、控制焊接变形和缺陷、表面处理等各环节实行严格的品质控制，多年来生产出多种型号的车架全部为合格品。
According to the test results, a rheological model that can reflect damage effect of loess is built in the paper, the model can analog accelerate deformation character well.
本文依据试验结果建立的考虑黄土损伤效应的流变模型能够很好的描述黄土加速蠕变阶段的变形特点。
Many Examples are given in this paper to indicate that some abnormal deformation or tendency of displacements of DAMS can be explained effectively by thermal field.
本文用许多实例说明当大坝变形异常或产生趋势性变化时，利用温度场常能有效地加以解释。
In this paper, based on systematic test on different bitumen mixtures of gradation, the deformation behaviour of asphalt mixtures is analyzed under high temperature.
本文通过对不同级配形式的沥青混合料的系统试验研究，全面分析了沥青混合料高温变形特性。
Our company product has the following characteristics: green, water stability, good stiffness, not easy to deformation, the paper web formation, surface smooth.
我公司产品具有如下特点：绿色环保，水分稳定，挺度好，不易变形、纸幅平整、纸面光滑等。
Based on construction practice, the paper analyzes deformation of railway embankment in permafrost zone in Qinghai-Tibet Plateau, centering on monitoring method for embankment deformation.
结合工程实例，简要分析在青藏高原多年冻土区修建的铁路路堤易遇到的变形问题，重点探讨路堤变形的监测方法。
The decision tree was applied in the rail deformation detection in this paper.
本文把决策树应用到轨道故障的检测中。
The paper has studied straightening stress and residual deformation of circular shaft by using elastic - plastic theory, deueloped calculation formula of straightening loud in given deflection error.
从弹塑性理论出发以圆截面轴为例对校正应力与残余变形进行了分析研究，提出了在给定弯曲误差下的校正载荷的计算公式。
This paper discusses the two indexes, dynamic stability and relative deformation, that evaluate the high temperature stability of the asphalt mixture by rutting test.
本文通过车辙试验讨论了衡量沥青砼热稳性的两个指标：动稳定度和相对变形。
In this paper, the stress and deformation of three different structuring forms of ship hull are analyzed under the conditions of the same external load and the equal mass structure.
本文在外载相同、艇体结构质量相等的条件下，对三种不同结构形式的艇体进行了应力与变形分析。
Adopting linear and nonlinear bearing model, this paper analyses the deformation and stress of bearing with large radius, basing on nonlinear finite element analysis method.
基于非线性有限元分析方法，采用了线性轴承模型和非线性轴承模型分析了大型四点接触球轴承的变形和受力。
In this paper, the deformation and support characteristic of underground engineering by the action of tectonic stresses is thoroughly analyzed with the numerical method.
采用数值计算方法，对处于较高构造应力作用下的地下工程的变形和支护特点作了深入分析。
In this paper, the thermal deformation of a plate is measured by Phase shifting laser holography interference.
本文应用相位移激光全息干涉法研究板状结构的热应变。
A rail deformation detection algorithm based on multi-threshold feature extraction was presented in this paper.
本文提出一种基于多门限特征提取的轨道故障检测算法。
In this paper, with bending loss of optical fiber, deformation of rock layer can be monitored.
在本论文中，首先根据光纤的弯曲损耗原理监测岩层的变形。
This paper introduces how to improve precision of Deformation monitoring by GPS in difficult conditions.
本文介绍了在困难条件下利用GPS技术如何提高变形观测的精度。
In this paper, after large deformation, scanning fractograph of tungsten alloys have been studied, and the influence of large deformation level on microstructure and properties has been analysed.
研究了高强度钨合金材料大变形量锻造后的扫描断口，并结合力学性能变化规律分析了大变形对材料组织和性能的影响。
In this paper, the deformation process and deformation mechanism of Qilianshan Structure Belt, since Cenozoic era, have been discussed.
论述了祁连山构造带新生代以来的变形过程及形成机制。
This paper USES Discontinuous Deformation Analysis (DDA) to analyse the dynamic stability of a rock slope slide.
本文用块体系统非连续变形分析(DDA)方法，对岩石滑坡体进行动态稳定分析。
In this paper, the deformation of two-dimensional red blood cell in linear shear flow is simulated using the immersed boundary method to observe the tank-treading motion.
本研究采用浸入边界法模拟二维红细胞在线性剪切流中的形变，观测细胞的坦克履带式运动。
Several problems of theory about elastic rolls deformation were studied in this paper.
本文对轧辊弹性变形理论的几个重要问题进行了研究。
This paper summarizes various factors of causing deformation and their effects on mechanical seal performance.
本文综述了变形的各种因素及其对机械密封性能产生的影响。
In of displacement induces shear stress. Shear deformation this paper, flow law of material is theoretically analysed based on deformation of the flange deformed area in box drawing.
针对盒形件拉深成形时法兰变形区的变形进行了材料塑性流动的理论分析，提出了位移速度差诱发剪应力的观点。
This paper analyses the deformation and the damage probability of knitted fabrics during sewing by means of the "tracer fiber" method.
本文用示踪纤维的方法，观察和分析了缝制针织物时针织线圈的变形和受损概率。
In this paper the deformation and stress of a pneumatic membrane sphere under contact loading between two parallel planes are discussed.
本文讨论一充气的薄膜圆球在两平行平面间接触加载时的变形与应力问题。
This paper deals with deformation textures, petrofabrics and dislocation microstructures of olivine from the mantle-derived xenoliths in the Penghu Islands, Taiwan.
本文详细研究了台湾澎湖列岛上地幔幔源包体的变形结构、组构和橄榄石位错构造。
In the paper, the bend deformation and correction technology are studied in view of automotive camshaft manufacturing practice.
文章从汽车凸轮轴制造工艺实践出发，对其弯曲变形及校正工艺进行了分析和研究。
In the paper, large deformation of symmetry fission has been described by a biquadratic surface revolution instead of several quadratic equations.
本文用四次方程代替常用的几个二次方程曲线的回转体，来描述对称裂交的大形变过程。
In the paper, large deformation of symmetry fission has been described by a biquadratic surface revolution instead of several quadratic equations.
本文用四次方程代替常用的几个二次方程曲线的回转体，来描述对称裂交的大形变过程。
应用推荐