During the integrated circuit packing process, the quality and service life of integrated circuit are decided directly by the quality of conductive adhesive through non-oxidation thermal curing.
在集成电路封装工艺过程中，对导电胶进行无氧化加热固化的质量直接决定了集成电路的质量和使用寿命。
Thermal oxidation of carbon nanotubes in air was performed by thermogravimetric experiment.
碳纳米管在空气在的热氧化性由热重实验测定。
Exceptional thermal stability and oxidation resistance prevents in-service oil degradation which contributes to filter blocking and sludge formation in the oil galleries, crankcase and valve train.
优异的热稳定性和抗氧化性防止在职石油降解这有助于阻止和污泥过滤器在石油画廊，曲轴箱和阀门列车编组。
Both gate and field oxides generally are grown by a thermal oxidation process because only thermal oxidation can provide the highest-quality oxides having the lowest. interface trap densities.
这两个栅和场氧化层都是通过热氧化过程生长出来的，因为只有热氧化才可以提供具有低陷阱密度性能最好的氧化层。
Excellent protection for all the system components to oxidation due to its fluidity and high thermal resistance.
基于它的流动性和高耐温性，给所有系统部件以卓越的抗氧化保护。
Plenty of oxidation etching pits are found on the surface of the specimen after the thermal fatigue test, and the surface principal crack is prone to propagate through these etching pits.
实验结果发现，试样表面出现大量的氧化腐蚀坑，表面主裂纹优先通过这些腐蚀坑扩展。
Oxidation happened on the surface of infiltrated layer when thermal cycling times was less than 20, and no cracks was observed.
结果表明：热循环次数小于20次时，渗层表面主要产生氧化，无裂纹产生；
In this research, through accelerated thermal oxidation tests on HDR blocks, the property variations inside the HDR bridge bearing are examined.
在本研究中，通过对HDR小板块进行加速热量氧化测试来检查HD R桥支座的内部的性质变化。
They have good heat transfer efficiency with better resistance to thermal cracking and chemical oxidation.
具有良好的传热效率，更好地抵抗热裂化和化学氧化。
The results indicated that the microstructure, mechanical properties, oxidation resistance, growth resistance and thermal fatigue resistance were improved obviously.
结果表明，显微组织、抗氧化、抗生长及热疲劳抗力等性能，均有显著的改善和提高。
This paper presents principally the fabrication procedures of lead Josephson. tunnel junctions formed by thermal oxidation in high purity oxygen and reports some experimental results.
本文主要介绍用高纯氧热氧化制作铅约瑟夫逊隧道结的方法以及一些实验结果。
Combining the DTA curves and the SEM micrographs of PCD, we ascertained the starting oxidation temperature on DTA as the characteristic temperature of thermal stability.
结合聚晶金刚石的差热曲线和SEM照片，确定以差热曲线的起始氧化温度作为其热稳定性的表征温度。
Each system is designed to meet site specific needs and can be fully integrated with activated carbon and thermal oxidation systems off-gas treatment systems.
每个系统的设计可满足特定需求，它们可以与活性炭和热氧化系统烟气处理系统一起使用。
Under static thermal stability testing conditions, the color degradation proceeded with the time of oxidation.
静态热安定性试验条件下，喷气燃料的颜色随氧化时间呈相对稳定的加深趋势；
The effects of surface thermal oxidation on the minority carrier lifetime of Czochralski (CZ) silicon wafers are investigated by photoconductive decay (PCD) method.
用高频光电导衰减法（PCD）研究了热氧化钝化对直拉硅少子寿命的影响。
RA330 is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock.
该耐热合金ra330是奥氏体耐热及耐蚀合金产品，有额外的组合强度且耐渗碳、耐氧化和耐热冲击。
The thermal oxidation kinetics for DHA and EPA glycerides was studied by differential scanning calorimetry (DSC).
利用差示扫描量热法(DSC)对DHA和EPA甘油酯的热氧化动力学进行了研究。
The growth kinetics of rapid thermal oxidation have been studied and the temperature activation energies for the oxidation growth rate have also been calculated.
对快速热工艺氧化的生长动力学进行了研究并计算了氧化生长速率的温度激活能。
Meanwhile it also exhibits some properties of ceramics such as excellent mechanical properties, high temperature stability, good resistance to thermal shock and high temperature oxidation.
而另一方面它又具有陶瓷材料的某些性能，如具有较高的屈服强度、高热稳定性和良好的抗热冲击性和高温抗氧化性。
Excellent thermal stability and outstanding oxidation resistance.
优越的热稳定性和突出的抗氧化性。
There are a few main degradation mechanisms: thermal degradation, chemical degradation, oxidation, microbial degradation and hydrolysis.
聚合物有几种主要的降解机理：热降解、化学物降解、氧化降解、微生物降解以及水解降解。
Moreover, the approach combining thermal oxidation and wet-chemical favors the formation of the denser, ordered epitaxial ZnO nanorods on the surface of zinc foil.
热氧化-湿化学法制备的纳米棒在锌片表面更致密、排列更加有序、取向性更好。
The gases utilized were pure N2, 20% O2 in N2 and H2, the principle of them regenerated activated carbon were thermal regeneration, oxidation and reduction respectively.
气体再生时所用的气体分别为高纯n2，含20%O2的N 2,H2，它们再生的原理分别是热再生，通过氧化单质硫再生和通过还原单质硫再生。
The physical properties, oxidation resistance, and thermal shock resistance of the low carbon MgO-C brick specimens added with the synthesized B4C-C composite powder are excellent.
以炭黑和硼酸为原料，采用碳热还原法合成了部分石墨化B4C-C复合粉体，并将其作为碳源和抗氧化剂用于低碳镁碳砖中。
A particularly excellent demulsibility and oxidation stability, thermal stability, anti-foam, no carbon deposit, maintain the exhaust valve cleaning, extended repair period.
有特别优异的分水性及氧化安定性，热稳定性、抗泡性，不产生积碳，保持排气阀门清洁，延长维修期。
The formation of deposits, which caused by thermal oxidation and thermal cracking, was the main factor on the stability of fuel.
热氧化和热裂解过程中沉积物的生成是影响燃料安定性的重要因素。
The study of oxidation resistance coatings and thermal resistance coatings was overviewed.
综述了目前国内外抗高温氧化涂层和热障涂层的研究现状。
As a thermal oxidation procedure, the annealing treatment is not only a crystallization process but also an oxidation process.
作为一道热氧化工序，退火处理不仅是一个氧化过程，而且是一个结晶过程。
This thesis for the internal first time puts forward the possibility of using dispersant for improving the thermal oxidation stability of Jet fuel, at same time the dispersant were chosen.
第一次使用高雷诺数热氧化安定性实验机来定量检测喷气燃料的热氧化安定性。
Outstanding thermal and oxidation stability, effectively reduce the oxide formation.
突出的耐热及氧化稳定性，有效减少氧化物的生成。
应用推荐