The SOHC KA24E was replaced by a new DOHC KA24DE now with 4 valves per cylinder, producing 15 more ponies HP, for a total output of 155 HP (116 kW).
SOHC KA24E型发动机升级成了DOHCKA24DE型,每气缸4气门,输出增加了15马力,达到了155马力(116千瓦)。
Cylinder pistons are attached directly to each guide rod, conserving size without sacrificing output force.
气缸活塞直接连接到每个导杆,节约不牺牲输出力的大小。
The use of pneumatic actuator cylinder piston and crank conversion structure, output torque, small size fine.
气动执行机构采用活塞式气缸及曲臂转换结构,输出力矩大,体积精小。
Reciprocating pumps convert rotary motion to linear motion. Pump speed in RPM determines the pumps output volume for any given combination of cylinder bore and piston stroke.
循环泵将曲轴旋转运动转化为柱塞的直线运动。泵速转每分钟决定了任何气缸和活塞组合的排泵量。
Specifically design for wind power industry, applying for output loop between stator and rotator in cylinder.
专为风力发电行业而设计,适用于塔筒内定子和转子的输出回路。
Therefore, this device has two advantages: (1) the pressure of impact cylinder may be higher than usual, so that the output can be increased.
因此,该装置有二个优点:(1)工作压力比一般冲击气缸高,所以能增加输出功。
In order to improve the plastification output, we adopt double-head of cylinder screw stem and two-feed chute. The two chute of the cylinder are both fixed on the special feed shaft stand.
为提高塑化产量,采用双头机头机筒螺杆两道机筒进料口,都作了特殊设计,以便于吃料和排气,两道机筒都装在专用加料轴承座上。
A new cylinder type ultrasonic motor with multi-degree of freedom was developed based on increasing its driving efficiency and improving its output characteristics.
从提高驱动效率、改善输出性能的角度出发,研制了一台新结构形式的圆柱形多自由度超声电机,对电机定子的工作模态和电机的输出性能进行了测试。
It can obviously decrease the press of the system in the situation of the output force and the diameter of the hydraulic cylinder is limited.
在输出力及液压缸直径一定的条件下,能显著降低系统的压力。
In hydraulic synchronizing lifting technology for oversize structure, computer output PWM signal as the input current of proportional valve is used to control the velocity of hydraulic cylinder.
在大型构件液压同步提升技术中,采用了计算机输出的脉宽调制信号作为电液比例流量阀的输入电流信号控制液压提升器的速度。
A new cylinder type ultrasonic motor with multi-degree of freedom was developed based on increasing its driving efficiency and improving its output characteristics.
介绍了自行研制的圆柱形多自由度超声波电动机的结构、驱动原理和输出性能。
Mixmaster includes a trigger output, derived from one of the 12 input signals, which can be used to synchronise the scope to a known cylinder.
该信号混合器包括一个触发输出,来自12个输入信号中的一个,它被用于同步示波器到一个已经知道的汽缸。
Note:the spring quantity is the number of the cylinder and output torsion is the general torsion.
注:弹簧数量为气缸一端的数量,输出扭矩为总扭矩。
In order to compensate for the area deviation of differential cylinder and change the output flow of the pump, a program of parallel-type of three-window of variable axial piston pump was proposed.
为了补偿差动缸面积差和改变泵的输出流量,提出采用并联型三配流窗口的变量轴向柱塞泵方案。
An oil pump (18) is arranged on the external part of the casing of the gear box and on a power output shaft (17), and an oil cylinder (9) is arranged on the rear upper part of the gear box.
在变速箱的壳体外部,于动力输出轴(17)上装有油泵(18),而油缸(9)被安放在变速箱的后上部。
Each gas regulator includes a sealable valve that defines an input and an output, with each valve including a piston having a cylinder and a rod.
每个气体调节器包括可密封阀,所述阀限定输入和输出,且每个阀包括具有活塞缸和活塞杆的活塞。
The results show that it will have obvious effect of increasing output , saving energy and reducing power consumption if superhigh chromium cylinder-ball mixing a small quantity of wearable-c.
结果表明:采用异形研磨体——含少量耐磨耐腐蚀的微量元素超高铬柱(棒或段)球,对于粉磨坚固矿石具有显著的增产、节能、降耗的效果。
The transmission ratio of the input shaft and the output shaft can be changed by regulating the length of the oil cylinder.
调节油缸的长度,改变输入轴和输出轴间的传动比。
We mainly produce cylinder, cold drawn tubes, honing tube, piston rod, and machinery manufacturing, the annual output reaches over 20,000 tons.
现主要生产油缸( 油缸管)、冷拔管、珩磨管、活塞杆以及机械加工制造等,年产量达20000余吨。
We mainly produce cylinder, cold drawn tubes, honing tube, piston rod, and machinery manufacturing, the annual output reaches over 20,000 tons.
现主要生产油缸( 油缸管)、冷拔管、珩磨管、活塞杆以及机械加工制造等,年产量达20000余吨。
应用推荐