It also helps in generation of data migration maps, to perform dependency analysis and also helps in optimization of target system data model.
还有助于生成数据迁移映射，以执行依赖性分析，而且还有助于优化目标系统数据模型。
The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
A numerical example shows that the structural analysis and optimization design model and method in this paper are valid and feasible.
算例表明：文中提出的随机结构分析和优化模型与设计方法是合理、可行和有效的。
After a brief description of the inertia vibrating mechanism with twin axles, the analysis and optimization method of dynamic model with two degrees freedom.
本文概要论述了双轴惯性振动机构，两自由度动态模型的分析和优化方法。
Based on the structural characteristics of bearing flange, the optimization model is established according to the objective function, design variables and constraints, and make a static analysis.
基于支承法兰盘的结构特征，通过目标函数的建立、设计变量的选取以及约束条件的确定建立了优化设计的有限元模型，并对法兰盘进行了静力分析。
The model can be used as the basis of performance analysis and parameter optimization in the design of digital pressure regulating valves and as reference for control system design.
这一模型可作为数字调压阀设计过程中性能分析和参数优化的依据以及控制系统设计的参考。
The model provides the basis for dynamic behavior analysis, process predictive control and optimization of VCM suspension polymerization.
此模型为氯乙烯悬浮聚合过程的动态特性分析、过程预测控制和优化提供了基础条件。
The assembly tolerance analysis and optimization method based on digital product design model is put forward according to the analysis of digitalization preassembly method.
通过对数字化预装配方法的分析，提出了基于数字化产品设计模型的装配公差分析和优化方法。
Based on the proper analysis model, optimization of suspenders drawing and adjusting of construction divergency are discussed.
基于合理的施工过程分析模型，进一步讨论吊杆张拉次序优化和施工偏差调整。
The multi minerals model analysis of optimization explanation can study and evaluate complex hydrocarbon reservoir adopting a great of logging formation and many kinds of models.
多矿物模型分析的最优化解释能采用多种测井信息和多种模型来研究和评价复杂油气层。
Topology optimization model based on the concept of TCO is derived from the structure analysis of NGN network, and correspondent algorithms are provided.
在NGN网络体系分析基础上，基于综合成本概念建立网络拓扑优化模型，并提出了相应算法。
Based on system analysis, a novel development optimization model is presented for water-driven unconsolidated sandstone gas reservoirs.
在系统分析的基础上，提出了水驱疏松砂岩气藏新的开发优化模式。
Second, based on the theoretical analysis, this thesis presents the braking force distribution optimization mathematics model and the braking performance computer simulation mathematics model.
然后，在理论分析的基础上建立了汽车制动力分配优化设计数学模型和制动性能计算机仿真数学模型；
Using increment analysis, the law of changing economic factors, such as cost, price, discount rate, etc, to influence the model optimization could be studied under different planting measures.
运用增量分析方法，研究不同栽培措施下，成本、价格、折现率等经济因素变化对栽培模式优化的影响规律。
Combining the mechanism analysis with Fuzzy Clustering technique, an optimization and decision-making model about operating parameters in the ISF smelting process is built.
最后基于机理分析和模糊聚类技术建立了密闭鼓风炉过程操作参数优化决策模型。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
Optimization method and analysis of model in a kind of special situation were provided.
给出模型在一种特殊情况时的优化和分析。
Adoption of systematic analysis technology to build programming model is important and useful for optimization of MSWMS.
所以，采用系统分析技术建立规划模型，优化城市生活垃圾管理系统具有十分重要意义。
This paper has set up more comprehensive mathematical model and the detailed research is carried out economic optimization analysis for the whole cold-end system.
建立了较为全面的数学模型，从冷端整体出发，对冷端系统进行经济性优化分析。
The network flow model is an important kind of model of CIMS, and bottleneck analysis based on network flow model is important to analysis and optimization of CIMS.
网络流模型是CIMS的一种重要模型，基于网络流模型的瓶颈分析对于CIMS的分析和优化具有重要意义。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
通过对塑件工艺分析的人工神经网络模拟，建立了可供工艺优化计算的数学模型。
According to the previous theoretical and empirical analysis, part six works out an optimization model of policy making, and the countermeasures.
第六部分根据前面的理论和实证分析提出了优化模型的政策设计、对策以及建议。
By principle and practice of system analysis the optimization problems and mathematical model of DGWE are advanced, and the solution technique is discussed.
文中运用系统分析的原理和方法，提出了深基坑降水工程中的最优化问题，建立了最优化数学模型，探讨了最优化问题的解法。
The application model for the optimization method of level-by-level analysis is put forward for the subsoil consolidation plans of large petroleum tanks.
提出了层次分析优化方法在大型石油储罐地基加固方案优化模型。
The DFP method of non-linear optimization is used to calculate shadow price in link. The REM algorithm is improved on the basis of analysis of REM algorithm and optimization flow control model.
在分析REM算法和最优化流控模型的基础上，改用非线性优化理论的变尺度算法计算链路影子价格，从而改进丁REM算法。
This model is suitable for the circuit analysis program, process tolerant analysis and device design optimization.
本模型可用于电路分析程序，工艺容错分析及器件的优化设计。
The model could be used in signal timing optimization, intersection design and drainage, transport cost analysis.
该模型可为信号交叉口的信号配时的优化、交叉口设计与渠化、运输成本分析等提供参考。
The model could be used in signal timing optimization, intersection design and drainage, transport cost analysis.
该模型可为信号交叉口的信号配时的优化、交叉口设计与渠化、运输成本分析等提供参考。
应用推荐