The author points out the way to choose the optimal parameter.
本文给出一个挑选最优迭代参数的方法。
The optimal parameter selection problem of rail haulage system in.
本文对煤矿井下轨道运输系统参数优化问题进行了讨论。
Performance is analyzed and optimal parameter Settings are obtained.
并对算法进行了性能分析。
The problem of optimal parameter design in Point-to-Point motion control was analyzed.
对单纯点到点控制方式下的最优参数设计问题进行了设计与分析。
The existing problems of optimal parameter extraction are discussed for device model in this paper.
本文分析了目前器件参数优化所存在的问题。
Using the output on line-printer for X-ray weld inspection films, the optimal parameter of printing control is investigated.
运用行式打印机输出焊缝X 射线探伤返修片的方法，研究了最佳打印控制参数。
The influence of the key work parameters on dry speed was analyzed. And the optimal parameter combination was obtained by using optimization technique.
分析了主要工作参数对干燥速度的影响规律，并利用优化技术得出了最佳参数组合。
To serve this purpose, we use a grid search technique using 5-fold cross-validation to find out the optimal parameter values of various kernel function of SVM.
为了达到这个目标及保证可靠性，研究中使用网格5-折交叉确认来寻找不同核函数的最优参数。
The results are used to develop a novel method of optimal parameter design for suppressing harmful effects of unbalanced power systems on voltage-source inverters.
并在此基础上提出了通过优化参数设计抑制系统不对称对电压源影响的新方法，同时对该方法的作用机理进行了理论分析。
Response Surface Methodology (RSM) was used to gain the optimal parameter of processing and to discuss how the parameters influenced the extraction rate of peptide.
运用响应面分析法优化泥鳅蛋白酶解的工艺条件，探讨了泥鳅蛋白酶解过程中液料比、酶解温度、酶解时间对多肽得率的影响。
For SVM, in this paper, a kernel function selection and parameter adjustment algorithm are presented. It can get optimal parameter adjustment in a given training set.
对于SVM，本文给出了一个核函数选择与参数调整的算法，它能够对给定训练集得到最优的参数调整。
The results also show that the algorithm fulfils the pulse shaping requirements of the nuclear spectrometer with optimal parameter settings for different applications.
该研究表明，梯形成形很好地符合核谱仪的脉冲成形要求，通过针对具体情况优化参数设置，易于满足不同应用的需求。
The traditional training methods of Gaussian Mixture Model(GMM) are sensitive to the initial model parameters, which often leads to a local optimal parameter in practice.
为了解决传统高斯混合模型（GMM）对初值敏感，在实际训练中极易得到局部最优参数的问题，提出了一种采用微粒群算法优化GMM参数的新方法。
Monthly discharge was simulated based on the optimal parameter sets for both calibration and validation periods, and compared with observed values for effectiveness evaluation.
根据最优参数值模拟了率定期和验证期兴山水文站的月径流量，并与实际观测值进行了对比评估。
The simulation and experimental results show that the proposed method can locate the optimal or near optimal parameter space, achieve a better solution space than the GA method.
仿真和实验结果表明，该方法能搜寻到最优或次最优的参数空间，并能取得比GA更好的空间解。
The model can be used to research the STATCOM behavior to provide theoretical guidance for optimal parameter design and to enhance STATCOM viability for asymmetric power systems.
基于以电容器为直流侧储能元件STATCOM在系统不对称情况下的数学模型，详细分析和解释了STATCOM在系统不对称条件下的运行特点、谐振现象以及参数对STATCOM的性能影响。
In order to obtain the optimal parameter estimates and reasonable accuracy evaluation should use Helmert variance component estimation method to deal with the combined adjustment.
为了得到参数的最优估计和合理的精度评定，应利用赫尔默特方差分量估计法进行联合平差处理。
Aiming the square sum of error (SSE), we construct the algorithm to iterate and select an optimal parameter for optimizing the new models, which ADAPTS the model to time series more.
又以预测误差平方和SSE最小为目标，构造了优选并自动生成最佳平滑参数使平滑模型得以优化的最速下降算法，增强了指数平滑模型对时间序列的适应能力。
The correlation coefficient is proposed as a criterion to determine the optimal parameter, and evaluate the performance of algorithms. The simulation results demonstrates its possibility.
并提出使用相关系数作为算法最优参数选取和性能评价的标准，计算机仿真实验结果证明了该方法的可行性。
Based on queuing theory, the mathematics model for vehicle maintenance system is presented and the operation efficiency of system is analyzed, then the optimal parameter for system is determined.
基于排队论方法建立了车辆维修系统的数学模型，分析了系统的运行效率，确定了系统参数的最佳设置方法，并通过改变维修组数量与结构，提高维修服务作业效率。
The optimal setting for this parameter needs to be tested with the biggest process that is going to be deleted.
需要用将要删除的最大过程进行测试，从而确定这个参数的最佳设置。
You can use the database snapshot to determine whether the LOGBUFSZ database parameter is optimal by viewing the following snapshot elements.
您可以通过查看下列快照元素，使用数据库快照来确定LOGBUFSZ数据库参数是否是最优的。
Because the DB2 optimizer does not know the values of the parameter markers in the prepare phase, a one-size-fits-all access plan is generated that cannot be optimal in all cases.
由于DB 2优化器在准备阶段不知道参数标记的值，因此生成了一个在所有情况下都不是最优的万能(one - size - fits - all)访问计划。
As we've discussed in this article, the DB2 optimizer may choose a sub-optimal access plan when there are host variables or parameter markers in the SQL statement.
正如我们在本文讨论的，如果sql语句中存在主机变量或参数标记，那么DB 2优化器可能会选择一个次优化的存取计划。
All the results are helpful for process parameter optimal design.
所得结果有助于工艺参数的优化设计。
The optimal damping control is a kind of optimal control of structure parameter (damping vector) with the feature of simple design.
最佳阻尼控制是一种结构参数(阻值向量)的最优化控制，设计简单。
Numerical results show that 'near optimal' parameter can be considered as an acceptable approximation of optimal regularization parameter with available priori information.
数值结果表明，在先验知识满足的条件下，近似最优参数法所找到的正则化参数是对最优正则化参数的较合理近似。
The relationship of these parameters can provide an evidence for optimal acquisition parameter devising and processing .
这些参数间的关系可作为最佳采集参数设计和处理方法选择的一种依据。
Optimal technics parameter fit in lotus green granitic stone is found by the study on skiving fine milling and polishing of lotus green granitic stone.
通过对芙蓉绿花岗石石材细磨、精磨、抛光的实验研究，找出了适合于芙蓉绿花岗石石材加工的最佳工艺参数(压力、给水量、时间等)。
Optimal technics parameter fit in lotus green granitic stone is found by the study on skiving fine milling and polishing of lotus green granitic stone.
通过对芙蓉绿花岗石石材细磨、精磨、抛光的实验研究，找出了适合于芙蓉绿花岗石石材加工的最佳工艺参数(压力、给水量、时间等)。
应用推荐