Animation set, that can well create static and dynamic images, is an important part and parcel of visible light optical target simulator.
动画机是可见光光学目标模拟器的重要组成部分，用以产生各种静态图像和动态图像。
According to the temporal and spatial features of transient optical targets, an optical target detection and location method based on templates is proposed.
基于瞬变光辐射目标的时空特性，提出了一种基于模板的光辐射目标检测与定位方法。
The laser reflected beam permeates the spectroscope and gets to the optical target, the image of the information measured of the optical target is shoot by CCD camera.
激光经反射后透射过分光镜到光靶上，CCD摄像机摄得光靶上被测信息的图像。
Since the beginning of 1980s, countries allover the world have turned the emphasis of studying on the testing system of weapon standing target to the CCD intersection optical target.
自八十年代初以来，国内外都将研究武器立靶测试系统的重点转向了CCD交汇光靶。
Based on absorbing some correlated domestic and overseas researching results, this paper introduces the thorough research on the key technology of CCD optical target acquiring system.
本文在吸收国内外相关研究成果的基础上，对CCD光靶采集系统的关键技术进行了较为深入的研究。
The FL-19 has six single-shot missile tubes with an integral electro-optical (EO) target detection and tracking unit, all mounted on the rear section of an armoured light truck.
FL-19有六根导弹发射管、一套集成的光电目标探测与追踪单元，都装在轻型装甲卡车的后部。
The attack helicopter, designated Zhi-9W (Z-9W), features a pair of external weapon pylon and a roof-mounted optical sight for target searching and tracking in daylight.
攻击直升飞机指定为直- 9w (Z - 9w)，特征是一对外部挂架和一套顶部安装瞄准具用于昼间目标搜索和跟踪。
In this paper, the step frequency response equation of optical-region radar target is firstly established by using theories of multiple scattering centers and local resonance.
本文首先根据多散射中心理论与局部谐振原理，建立了雷达目标在光学区阶梯频率波形激励下的响应方程。
Optical flow is used for moving target detection.
运动目标检测主要采用光流法。
The weapon operator search and locate the target using a periscope optical sight (7km range) in day light, or a thermal imager at night or in bad weather conditions.
武器操作员在白天亮光下使用一个潜望镜白光瞄准镜（7公里范围）或在不良天气条件或夜间使用热成像去搜寻和定位目标。
The paper discovers a method, by which the imbalance force and coupling are balanced simultaneously with the utilization of balancing machine and optical test platform with a simulating target.
提出了一种利用动平衡机和光学测试平台模拟目标相结合对转子的不平衡力和不平衡力偶进行同时平衡的方法。
Under the bad measurement circumstances, after the reasonable optical coupling, the signals in the area of red dots (tiny target) can be received and measured accurately.
在其恶劣的测量环境下，经合理的光耦合，使红点区域(小目标)的信号能够得到精确的接收与测量。
It can not only apply in calculating of target optical scatting, but also in modeling and simulating for microwave scattering characteristics of complex target.
不但可在目标光散射计算中得到应用，也可应用于对复杂目标的微波散射特性计算建模和仿真中。
Optical sensor target recognition extracts the characteristic of target to perform target recognition after having acquired its reflection and radiation (spectra) characteristics.
光传感器目标识别则是在取得目标的反射特性和辐射特性（光谱）后提取其特征进行识别。
The design characteristics are that center of the disk is not on optical axis, deviation of target is linear and continuous and azimuth information of target is given in orthogonal coordinate system.
该调制盘的设计具有调制盘的转动中心与光学系统的光轴不同心，连续线性反映目标的偏离量，以及以直角坐标方式给出目标的方位信息等特点。
Based on the detail analysis of optical flow model, a robust multi-resolution estimation approach of optical flow is proposed, and some practical problems are also discussed on target detection.
该文在分析光流模型约束条件的基础上，提出了一种鲁棒的多分辨率光流估计方法，并对光流应用于目标检测的一些实际问题进行了探讨。
It is through radio signals to identify a specific target, read and write the corresponding data, without mechanical or optical contact with the identification system.
它通过无线电信号识别特定的目标，并读写相关的数据，而不需要识别系统与这个目标有机械或者是光学接触。
The position loop use optical encoder as the feedback element. It is used to search and track the target.
位置回路采用光电编码器作为反馈元件，完成对目标的搜索、跟踪。
The properties of target and the structure, crystallization kinetics and optical property of film were analyzed particularly.
对靶材的组织与性能，薄膜的结构、结晶动力学及光学性质进行系统的测试分析。
The optical principium of two sets of and multi sets of CCD vertical target measurement system is introduced in this paper. The calculation method of coordinate is presented.
本文分别介绍了两台和多台CCD立靶测量系统的光学测量原理，给出了立靶测量脱靶量的计算方法。
The paper presents an optical method based-on a new target feature structure and single-image for testing the relative position and attitude between spacecrafts.
提出了一种新目标特征构型下基于单帧图像的航天器间相对位置和相对姿态测量方法。
The optical distance measurement sensor can effectively escape electromagnetic interference coming from the hostile and measure the target distance, so it is still be used widely on modern aircraft.
由于光学测距传感器能够有效地避开敌方电磁干扰并对目标距离进行测量，因而在现代飞机上仍然得到了广泛应用。
In this paper, a moving target tracking method based on feature optical flow is proposed. It well overcomes the main disadvantages of the available feature optical flow based methods.
本文提出一种基于特征光流的运动目标跟踪方法，较好地克服了以往基于特征光流的方法中存在的主要不足之处。
The outputs of this kind of optical fiber reflective sensor are independent of the characteristics of the light source, of the losses in the ambient medium and the target reflectivity.
这种可补偿型光纤位移传感器的输出与传感器光源的特性、环境介质以及被测目标表面的性质无关。
The experiment measured the fine spectrum structure of 2 doubling harmonic at near normal direction of target and reflection direction of laser wave, employing OMA optical multi-channel spectrometer.
利用OMA光学多道分析谱仪，分别在激光镜反方向和接近靶面法线方向测量了2倍频谐波的精细结构。
Finally, this thesis summarizes the context and constructs an underwater optical vision based target recognition system using definite hardware and software.
论文最后利用一定的硬件平台和相关的软件体系构建了一个水下光视觉目标识别系统。
How to detect target in strong background has always been a choke point in limiting electro-optical equipment's ability.
背景很强时对弱目标的检测，一直是限制光电探测设备监测能力的瓶颈。
This paper presents the features of a lens designed for converging the laser beam onto the target and the solution of the aspherical lenses using equal optical path principle.
本文介绍了激光打靶透镜的特点及用等光程原理求解非球面透镜的方法。
This paper presents the features of a lens designed for converging the laser beam onto the target and the solution of the aspherical lenses using equal optical path principle.
本文介绍了激光打靶透镜的特点及用等光程原理求解非球面透镜的方法。
应用推荐