By the comparison of hardness and optical microstructure between fired part and non-fired part of the well-frame, it is found that the hardness of the fired part has increased.
通过对井架底部火烧部位和未火烧部位进行硬度和显微组织的对比试验发现，火烧部位硬度得到提高；
Optical microstructure pictures show that the magnetic field have few effects on the mean grain sizes of samples through magnetic annealing, and the grain sizes vary drastically.
金相显微组织分析表明，不同磁场退火处理后试样晶粒平均大小变化不大，而晶粒间不均匀程度增加。
Due to its complicated microstructure and absorption mechanism, it's difficult to measuring optical constants of ITO.
由于ITO具有复杂的微观结构和吸收机制，很难准确测量出它的光学常数。
Microstructure of machinable glass-ceramics prepared in different processes of heat treatment was investigated by optical microscope.
在光学显微镜下考察了不同热处理制度下可加工微晶玻璃陶瓷的组织和结构。
Microstructure of simulated coarse grain heat affected zone (CGHAZ) of Zr Microalloyed HSLA Steel are investigated using optical microscopy and transmission electron microscopy.
采用光学显微镜和透射电镜研究了锆处理对微合金钢粗晶热影响区组织的影响。
In this paper, the variation of microstructure and the complete process of grain slide during loading of the coral sand are observed with the optical microscope and the self-developed loading device.
采用自行研制的加载装置，配装在光学体视显微镜下，观测了珊瑚砂土在加载过程中微结构的变化及颗粒滑移的全过程。
The composition and microstructure of the failed copper alloy tube in a condenser were studied by means of optical microscope and EMPA.
用电子探针、光学显微镜对电厂凝汽器泄漏铜管的成分、组织、微区元素分布进行分析。
This is a typical optical, mechanical, electronic and calculated integral system and can be applied to the geometry and dynamic measurement of MEMS microstructure.
该系统是一个典型的光、机、电、算集成的MEMS测试系统，已应用于MEMS微结构几何尺寸和动态特性等的测量。
The optical performance of the fused-taper fiber device is determined by microstructure and morphology of the fused taper region, which are determined by technological conditions.
熔锥型光纤器件的光学性能由熔锥区的微观结构和形貌决定，而微观结构和形貌又由工艺条件决定。
Particle shape, surface morphology and microstructure of skin layers and adhering satellites were studied by using optical and scanning electron microscopy.
用光学显微镜和扫描电子显微镜研究了粉末形状、表面形态和包复层、粘接处的显微组织。
The microstructure and the phase composition of the alloy were analyzed through optical microscopy, SEM, EDAX and XRD techniques.
通过光学显微术、SEM、EDAX、XRD技术分析了热等静压对材料的显微组织和相成分的影响。
In this paper, scanning tunneling microscopy (STM) is used to investigate the microstructure of organic films in optical recording.
运用扫描隧道显微镜(STM)观察了光记录有机薄膜的微观结构。
Effects of tin on the microstructure and mechanical properties of ZA62 alloys were investigated using optical microscopy, XRD analysis and tensile test.
采用金相显微镜、X射线衍射仪等分析测试手段，研究了锡对ZA62合金显微组织及力学性能的影响。
The effect of anisotropic microstructure of semiconductor composites on the optical nonlinearity enhancement is investigated.
本文研究了半导体掺杂复合材料微结构的各向异性对材料的光学非线性增强的影响。
The microstructure was observed through optical microscope and SEM. The composition was studied by EDS and XRD. And the density and hardness were also measured.
利用金相显微镜和SEM研究了合金的形貌，利用EDS和XRD研究了合金的成分，并测定了合金的密度和硬度。
The microstructure, optical, electrical and thermal properties of hydrogenated silicon films were characterized by a series method.
运用多种分析与测试方法，研究了氢化硅薄膜的微观结构、光学、电学和热学等物理特性。
Using ODF's analysis, the micro-orientated flowing behavior of magnesium alloy AZ31 by forging was investigate, and using optical microscopy, the grain size and microstructure were measured.
为了解az31镁合金自由锻过程中织构的形成和变化，用odf分析对AZ31镁合金在自由锻时的微曲向流变行为进行了分析；用光学显微镜对其显微组织和晶粒尺寸进行了测定。
The microstructure and strip rolling breakage of low nickel austenite stainless steel were observed and analyzed by optical microscope, SEM and electronic probe.
对节镍型奥氏体不锈钢冷轧断带进行金相显微观测和电子探针分析。
The microstructure, properties and cracks of the fractured cold pressing die made of 45 steel were analyzed by optical microscope, scan electronic microscope and micro-hardness instrument.
采用光学显微镜、扫描电子显微镜、硬度机等对表面已开裂破损45钢冷冲模具的组织、性能和断口进行研究分析。
The macrostructure and microstructure of the solidified samples was observed by digital camera and optical microscopy, respectively.
利用光学显微镜和数码相机对凝固试样的宏观及微观组织进行观察。
The microstructure and porosity of high speed steel (HSS) prepared by spary forming have been studied with optical microscope and scanning electron microscope (SEM).
采用光学显微镜、扫描电镜研究了沉积高速钢孔隙的大小、形状、分布及显微结构。
The results indicate that the optical nonlinearity of bulk material may be enhanced by 1 ~ 2 orders of magnitude through anisotropic microstructure.
结果表明，复合材料微结构的各向异性能够使得整体复合材料的非线性光学增强达1 ~2个量级。
The effects of minerals (oxides) on coke microstructure are studied by adding 13 types of different oxides into coal to carbonize using optical microscopy and X-ray powder diffraction.
将十三种矿物质（氧化物）添加到煤中炭化，用光学显微镜和X射线衍射方法研究矿物质的存在对所得焦炭显微结构的影响。
The results indicate that the optical parameters of the film strongly depend on its microstructure and the bonding of the atoms.
结果表明薄膜的光学常数强烈的依赖于其微结构和原子间的键态。
The microstructure and solute concentration distribution of solidified layers is studied by means of optical microscope, SEM and EDS analysis methods.
借助于光学显微镜、扫描电镜和EDS能谱分析等方法研究了熔凝层显微组织和溶质浓度分布。
The microstructure and mechanical properties of the as-cast and hot-rolled samples were investigated by optical microscope, X-ray diffraction, scanning electron microscope and tensile test.
利用X-射线衍射仪、光学显微镜、扫描电子显微镜和拉伸试验研究了铸态合金和轧制态合金的组织和力学性能。
The effects of rare earth Y on the microstructure and properties of low carbon micro-alloyed steel were studied by optical microscope, scanning electron microscopy and spectroscopy.
利用光学显微镜和扫描电镜以及能谱分析，研究了稀土元素钇对低碳微合金钢组织、性能的影响规律。
In this paper, optical microscopy (OM), scanning electron microscopy (SEM) and scanning tunneling microscopy (STM) are used to investigate the microstructure of recorded organic thin film.
通过光学显微镜(OM)，扫描电镜(SEM)和扫描隧道显微镜(STM)观察了光记录有机薄膜的微区结构。
The microstructure evolution during the warm deformation is observed by optical microscopy (OM) and transmission electronic microscopy (TEM).
通过光学显微镜和透射电镜观察了温变形中的微观组织演变。
The microstructure evolution during the warm deformation is observed by optical microscopy (OM) and transmission electronic microscopy (TEM).
通过光学显微镜和透射电镜观察了温变形中的微观组织演变。
应用推荐