Commercial resources for optical and electron microscopy.
商业资源的光学和电子显微镜。
The study of the structure of metals and alloys, especially by optical and electron microscopy and X-ray diffraction.
金相学，金属结构学以金属与合金结构为研究对象的学科，尤指用光学和电子显微镜使用。
The effects of various defects of carbon fibers on their mechanical properties were observed by using optical and electron microscope.
用光学显微镜和电子显徽镜观察了中间相碳纤维的形态缺陷对其力学性能的影响，并作了初步探讨。
The morphological struture of the rayon fibers during oxidizing and carbonizing process has been examined using optical and electron microscope technique.
使用光学和电子显微镜技术研究了纤维在氧化和碳化过程中的形态学结构。
It has been shown by optical microscopy, electron microscopy and chemical analysis that such glaze has the property of physicochemical immiscibility.
使用光学显微术、电子显微术和化学分析证实这种釉具有不混溶性的化学本质。
By using Optical Microscope (OM) and Scanning Electron Microscope (SEM), the structural features of cross section, interior and exterior surfaces for wheat straws were observed and analyzed.
利用光学显微镜(OM)和扫描电镜(SEM)对麦秆横切面、内、外表面的组织结构进行了观察和分析。
Optical metallographic microscope, micro-hardness tester, electron microprobe and X-ray diffraction analysis were applied to explore the process of intermediate temperature tempering transformation.
利用光学金相显微镜、显微硬度计、电子探针及X射线衍射分析仪初步探索其中温回火转变过程。
The braze and interfacial microstructures were characterized by optical microscopy, scanning electron microscopy, and energy dispersive spectroscopy.
在钎焊和界面微观结构的特点是光学显微镜，扫描电子显微镜和能谱。
Curvilinear axis Gaussian electron optical properties and aberration characteristics of the novel electrostatic immersion magnetic lenses are studied.
研究了新型的复合静电磁浸没透镜的曲光轴高斯电子光学性质及像差特性。
Aemission spectrometer, micro-hardometer, optical microscope and scanning electron microscope were used to analyze the reason of crack on connecting rod unit assembly for piston of car engine.
采用直读光谱仪、显微硬度机、光学显微镜和扫描电子显微镜等分析手段，对失效的汽车发动机活塞连杆总成断裂原因进行了分析。
Both the diffusion couple specimens and the alloys were examined by means of optical microscopy, scanning electron microscopy, and electron probe microanalysis.
扩散偶和合金样品采用光学显微镜、扫描电镜和电子探针显微分析技术进行分析。
In this paper, the interaction between surface electron and surface optical phonon for a strong coupling polyatomic polar crystals in magnetic field is studied.
本文研究磁场中强耦合多原子极性晶体中表面电子和表面光学声子的相互作用。
Mechanism of electron trapping optical storage and storage properties in different material was reviewed in detail. Some problems related with utilities were discussed.
着重介绍了电子俘获材料光存储机制，以及各种材料的存储特性，并探讨了存在的问题。
Microstructure of simulated coarse grain heat affected zone (CGHAZ) of Zr Microalloyed HSLA Steel are investigated using optical microscopy and transmission electron microscopy.
采用光学显微镜和透射电镜研究了锆处理对微合金钢粗晶热影响区组织的影响。
Particle shape, surface morphology and microstructure of skin layers and adhering satellites were studied by using optical and scanning electron microscopy.
用光学显微镜和扫描电子显微镜研究了粉末形状、表面形态和包复层、粘接处的显微组织。
The part of linear optical can be divided into electron spectra and one-photon fluorescence spectra.
线性光学部分，分为电子光谱和单光子荧光光谱。
The effects of different holding times on the shapes, compositions and sizes of the inclusions were investigated by using optical and scanning electron microscopes and by the electron microprobe.
利用光学显微镜、扫描电子显微镜和电子探针研究了不同保温时间对钢液中非金属夹杂物的形状、成分和尺寸的影响。
The quenching sensitivity of 7050 aluminium alloy hot-rolled plate was studied by using end quenching test and optical microscopy (OM) and transmission electron microscopy (TEM).
用末端淬火、光学金相显微镜和透射电镜技术研究7050铝合金热轧板的淬火敏感性。
The speciation of silver in the lead concentrates were analyzed by means of optical microscope and electron probe micro-analyser (EPMA).
利用光学显微镜、电子探针对铅精矿中银的赋存状态进行了分析。
The abnormal block and black round structure of 50 axletree steel was studied and analyzed using optical microscopy, transmission electron microscopy, electron probe and so on.
用光学显微镜、透射电子显微镜以及电子探针等现代材料试验手段对50钢中存在的大块黑色团状异常组织进行了研究和分析。
The microstructure and properties of the composite coatings were investigated by optical microscopy, X-ray diffractometer, electron probe microanalyzer and a skimming wear machine.
利用金相显微镜、X射线衍射仪、电子探针及滑动磨损试验机，研究了合金熔覆层的显微组织及性能。
Employed by optical microscope, scanning electron microscope, microhardness tester and X ray diffraction instrument, the isothermal decomposition process of high nitrogen austenite was investigated.
利用光学显微镜、扫描电镜、显微硬度计及X射线衍射仪分析了高氮奥氏体的等温分解过程。
This paper, using the optical microscope and scanning electron microscope, made an observation on the pollen shapes of 11 species of Atraphaxis L, plants in our state and 1 species of A.
本文对11种产于我国的木蓼属植物和1种哈萨克斯坦特有的穆氏木蓼花粉形态进行了光学显微镜和扫描电镜观察。
These results of this paper may be of use in designing focusing or deflection systems of electron ray devices, electron-optical instruments and high energy accelerators.
这些结果可用于电子束器件、电子光学仪器和高能加速器中的聚焦或偏转或聚焦兼偏转元件的设计。
The deformation and fracture of mild steel under high frequency bending fatigue has been studied by optical microscope, scanning electron microscope and microhardness determination.
用光学、扫描电子显微镜及显微硬度计，研究了低碳钢在高频弯曲疲劳过程中的形变及断裂。
Macro and micro structure of the fractured steering knuckle arm was examined by optical microscope and scanning electron microscope.
采用光学显微镜和扫描电镜对断裂转向节臂的宏、微观组织进行了分析。
The bone healing and the chondrogenesis of the implant with the receptors were observed with X-ray, electron and optical microscopes 2, 4, 6 and 8 weeks after operation.
术后2,4,6,8周通过大体形态X线、光镜和电镜检查评判移植物与受床愈合及软骨生长情况。
The reasons for cracking of a cracker heater shell had been revealed with the aid of optical microscope and scanning electron microscope et al.
采用光学显微镜和扫描电镜等试验手段分析了某裂解器加热器壳体出现开裂的原因。
The reasons for cracking of a cracker heater shell had been revealed with the aid of optical microscope and scanning electron microscope et al.
采用光学显微镜和扫描电镜等试验手段分析了某裂解器加热器壳体出现开裂的原因。
应用推荐