The PLC is an important module to high-performance open CNC system.
在开放式数控系统中，PLC模块的开发在高性能CNC系统中有着重要的作用。
The paper introduces background of open CNC system-PCNC based on PC.
介绍了以PC为基础的开放式数控系统——PCNC的产生背景；
Research on architecture plays an important role in open CNC system basted on PC.
在开放式微机数控系统中，体系结构的研究具有重要的地位。
Though the conception of open CNC system, but the definition of it isn't agreed by industry.
尽管开放式数控系统的概念已经出现了很久，但在业界一直未能得到统一。
Lastly, the paper researches some key technologies about the realization of open CNC system.
最后，本文研究了实现开放式CNC系统的一些关键技术。
This thesis is discussing the method of construction the server layer for an open CNC system.
本课题所研究的主要内容就是在这一系统结构之中最为重要的系统服务层的设计与实现。
Therefore the digitizing collection technology based on open CNC system is studied in this paper.
针对这种情况，本文研究了基于开放式数控系统的数字化采集技术。
The open CNC system has become the trend of development of machine tool industry in long-term competition.
开放式计算机数控系统已成为面向未来机床工业竞争的必然发展趋势。
The open CNC system, using the control equipment of soft linking, wants to acquire the flexible excellence.
开放式CNC系统采用软联接控制装置，以期获得灵活易变等优点。
All research is helpful to reduce CNC system developing work and provides universal part to build open CNC system.
对数控加工程序编辑模块开发的研究，可减轻对数控系统开发的工作量，为构建开放式数控系统提供通用模块。
In this paper, the importance of open CNC system is introduced, then the concept and design method of virtual nc system are presented.
简述了提高数控系统开放性方面的意义，提出虚拟数控系统的概念及设计思想，可利用软件构件技术结合虚拟技术构筑开放化数控系统。
On the basis of analyzing open CNC system and network CNC technology, the new concept of nc information network storage manufacture was presented.
在分析开放式数控系统和网络数控技术的基础上，首次提出了数控信息网络存储制造的新概念。
An open CNC system with two CPUs in parallel, in which the center is PMAC motion controller and the supporting element is industrial PC, is suggested.
提出了一种以PMAC运动控制器为控制系统核心、工业控制机为系统支撑单元的双cpu开放式数控系统。
The open CNC system on STEP-NC was brought forward. The gross structure of the open CNC system was put forward, and the function of each compositive module of…
提出一种基于STEP-NC的开放式数控系统，确定了开放式数控系统的总体结构，并着重介绍了STEP-NC数控系统各组成模块的功能。
A method of how to use MATLAB Engine interface technology to add Fuzzy control in the Open CNC system based on the motion controller is introduced in this paper.
论文阐述了在基于运动控制卡的开放式数控系统中如何利用MA TLAB引擎接口技术来加入模糊控制的方法。
A brief introduction to the idea of open CNC system was given, and the definitions and characteristics of technology of software-based CNC system were introduced.
简述了开放式数控技术的思想，介绍了软件NC技术的概念和特点。
To adapt to the trend in development of open CNC system and modem manufacture technique, a CNC principle experimental instructional system based on PC is developed.
为适应开放式数控系统及现代制造技术的发展趋势，开发研制了基于PC机的数控原理实验教学系统。
On the base of analyzing and studying the architecture of open CNC system, the overall plan architecture and system instruction design of four-axis EDM CNC system are carried out.
作者在分析和研究开放式数控系统体系结构的基础上，对四轴电火花数控系统进行了总体规化、系统结构和系统命令的设计研究。
The architecture of open CNC system is presented based on the RTCORBA technology according to the functions of the traditional CNC. The function modules of CNC are analysed and designed.
在分析现有多种开放式数控系统规范的基础上，提出了基于CORBA技术的软件化开放式体系结构的数控系统，对数控系统的各个功能模块进行了分析和设计。
Though time-slicing interpolation used in Open-loop CNC can prompt system performance effectively.
在开环数控系统中采用数据采样法插补，可以有效提高系统性能。
The paper researches information of open network CNC system, sets up module of information and elaborates the key technology of information integration of CNC system.
论文对开放式网络数控系统的各种信息进行了研究，并建立了各种信息模块，详细论述了数控系统信息集成的一些关键技术。
It can apply to the current popular open NC and all kinds of CNC system.
该算法适用于目前流行的开放式数控系统和各种CNC系统。
In this thesis, the theory of open computer numeric control (CNC) was discussed and a miniature CNC system was developed according to ISO open computer numeric control.
本文根据开放型计算机数控系统的理论，对开放型控制系统进行探讨，并开发出一套小型计算机数控系统。
This thesis presents the research and design of the software system of the open CNC based Camshaft grinding machine.
本文对基于开放式数控系统的全数控凸轮轴磨床软件系统进行了研究与设计。
This paper introduces the idea of open architecture, and proposes principles of reference model of open architecture CNC system.
概述开放式体系结构的思想，总结提出开放式体系结构数控系统参考模型的原则。
The open four-axis CNC system based on PC and motion control card can accomplish the cutting of various-angle welding plate.
并以基于PC和运动控制卡的开放式四轴数控系统实现支管端头的变角度焊接坡口面切割。
A new open architecture multi-processor intelligent CNC system design for milling machine is presented.
提出了一种新颖的开放式铣床智能数控系统的体系结构。
Aimed at developing open architecture CNC system for CAM grinder, the design of hardware and software is included and the software design is the focus in this paper.
本文以开发凸轮磨床开放式数控系统为目标，涉及硬件、软件设计两个方面，侧重数控系统的软件设计。
Study the hardware design of the CNC system based on the open motion controller. Provide a whole solution of mechanism and electric design.
介绍研究基于开放式运动控制器的数控系统的硬件设计，提出一套完整数控系统的机械以及电气解决方案。
Running experiments and testing experiments of open intelligent CNC system proves that the system model and the hardware design is reasonable.
开放式智能数控系统的运行实验和测试实验证明了系统模型与硬件设计的合理性。
应用推荐