On-line simulation is performed and the result showed that the algorithm converges provided that the process under study is stationable and has rational spectral density.
在线模拟实验表明，只要被跟踪的过程是平稳的，且具有有理谱密度，那么这种算法就是收敛的。
The on-line simulation and optimization system based on CHEMSTAR is developed, which is based on platform of CHEM-STAR developed by Research Center for Computers and Chemical Engineering.
以青岛科技大学计算机与化工研究所的CH EMST AR 化工之星为平台，开发了基于CHEMSTAR 的在线模拟优化系统。
The results of simulation indicate that this method has good dynamic characteristics and is adaptive for on-line control.
模拟结果表明：该方法具有良好的动态性能，适合于在线控制。
For reliability analysis of implicit limit state function, an improved line sampling method is presented on the basis of sample simulation in the failure region.
针对隐式极限状态方程的可靠性分析，提出了一种基于失效域样本模拟的高效线抽样法。
The paper also presents the applications of the model to computer simulation, computer supervisor control and on-line state estimation by state observer and Kalman filtering respectively.
本文同时介绍了数学模型在实现计算机模拟、计算机监督控制和状态观测器、卡尔曼滤波器等方面的应用。
With Canadian SES's CDEGS software, this paper makes detail simulation research on the four electromagnetic parameter of AC EHV and UHV transmission line.
本文利用加拿大SES公司出品的CDEGS软件包对交流超高压以及特高压输电线路就这四个方面进行了详细的仿真研究。
Simulation result was verified by the temperature on the lower surface of the sheet metal, which was measured by the thermocouple temperature transducer measuring under the laser scanning line.
通过温度传感器测量与激光扫描线相对应的薄板下表面温度变化的规律来验证数值模拟的结果。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
采用该软件对个别典型的工艺进行分析，为连铸连轧生产线的设计提出了有益的建议。
A wind turbine aerodynamics simulation module based on non-linear vortex-line theory is tested in the numerical aspect in this paper.
对基于非线性涡流线原理的风力机空气动力学模型进行了数值试验。
It is shown by theoretical analysis and simulation that this control low, which can applied to semi-close loop and full-close loop system, is simply in design and on-line realization.
理论分析和仿真结果表明：该控制方法设计简单，便于在线实现，并能同时应用于半闭环系统和全闭环系统。
In one words, based on principle research and many simulation and practical experiments, this research realizes the power line carrier communication in automobile.
总之，本文在理论研究的基础上，通过大量的仿真和实际实验，实现了汽车内电力线束载波数据通信。
Based on the content analysis of assembly line planning, a method for assembly line planning based on standard work time and simulation is proposed, and a corresponding prototype system developed.
在分析装配线规划内容的基础之上，提出了基于标准作业时间及系统仿真的装配线规划方法并开发了相应的原型系统。
The method was developed for the matrix determination and the component analysis by the character line in Ni-based alloy based on digital simulation.
在镍基合金可见光谱计算机模拟基础上，研究利用镍元素及成分元素特征谱线进行基体鉴别和成分元素分析的方法。
This paper presents a numerical simulation algorithm based on numerically solving differential equation system by means of the Transmission Line Modeling (TLM) for lumped inductor.
应用集总电感元件的传输线建模方法(TLM)构造了一种基于数值求解微分方程的数字仿真算法。
By the comparison with the two-wheeled differential drive structure on line or circular track's simulation experiment result, illustrate the tricycle WMR's superiority more and more.
通过与两轮差动驱动结构走直线和圆轨迹的仿真实验结果的比较，进一步说明了三轮式结构的优越性。
The path planning of machining center on-line inspection is the crucial point that determines to inspect efficiency and precision, the simulation can verify the inspecting path.
加工中心在线检测路径规划是决定在线检测效率和精度的关键所在，仿真是验证检测路径的有效途径。
Simulation result shows that the presented method reduces the error of actual filter, improves the accuracy and can amend filter's parameters on-line.
仿真结果表明，两种方法结合，可以有效地防止滤波器发散，缩小实际的滤波误差，提高滤波精度，实现滤波器参数的在线改进。
CAE platform can support the whole cycle of the design of FACTS equipment, including theoretical design, digital simulation, regulation on line, physical experiment, and real time operation.
CAE平台作为一个一体化的环境，能支持FACTS装置控制器设计的整个生命周期，即理论设计、数字仿真、在线调试、动模实验和实时运行。
Finally, this paper studies the problem of the selection of overtaking station and the proportion of train interval by computor simulation of train graph making on Shanghai urban rail transit line.
并以上海某市域快速轨道交通线为例，通过计算机仿真铺画列车运行图的方法，对开行快慢车后越行地点的选择以及列车始发的均衡性问题进行了分析研究。
This paper briefly described its functions such as topology structure, network structure off-line analysis, the same kind equipment redundancy analysis, on-line fault simulation, etc.
对该系统通信网结构拓扑入库、网络结构离线分析、同型设备冗余分析、在线故障模拟等功能进行了简要描述。
The classic algorithms for the bin packing problem were extended to the on line ASBP. Comparisons of the worst case analysis and simulation lead to interesting results.
把装箱问题的经典算法推广到在线A形装箱问题，并分别从最坏情形分析与数值模拟两方面对算法进行了比较，得到了不同而且有趣的结果。
Simulation and experiment results demonstrated the efficiency of the control method. The controller has a simple structure and its parameters can be tuned on line.
仿真和实验结果都表明了控制方案的有效性，而且该控制器结构简单、参数可在线调整。
Simulation results of a disturbed pre-fractionator show that this algorithm can be used to solve on-line parameters-recognized problem of a kind of multi- neural networks model effectively.
对处于扰动状态下的预分馏塔的仿真结果表明，该算法可以有效地解决一类多神经网络模型的在线参数辨识问题。
In this paper, fuzzy recognition technology is applied by means of fuzzy set theory to present an on-line fuzzy recognition method for boiler energy-loss pattern, and simulation test was made.
本文应用模糊识别技术，借助模糊集理论提出了一种锅炉能损模式的在线模糊识别方法，并进行了仿真测试。
The result of simulation shows that this neural network fuzzy controller features self-learning and self-adaptive capabilities, and the purpose of on-line control is accomplished.
仿真结果表明，所设计的神经网络模糊控制器具有自学习、自适应等优点，达到了在线控制的目的。
Simulation analysis and experiment results indicate that changing tool geometric angles continuously in cutting process is an effective method in on-line controlling of cutting vibrations.
模拟分析与试验结果表明，连续改变刀具角度是在线控制切削颤振的有效方法。
Computer simulation results show that the proposed approach has strong fault tolerant ability a-gainst sensor faults, moreover the sensor faults can be on -line detected, isolated and estimated also.
数值仿真结果验证了该方法不仅具有很强的关于传感器故障的容错能力，而且还可检测、分离和估计出相应的故障。
This algorithm avoids the dynamic programming in sub optimization problems, and improves the efficiency of the on line computations. The simulation results show the effectiveness of the new algorithm.
该算法避免了在子问题的求解中使用效率较低的规划方法，提高了线计算的效率。
Based on simulation, the characteristics and mechanisms of failure on a deep sub-micron grounded-gate NMOS (GGNMOS) are studied under TLP (transmission line pulse) stress.
对TLP(传输线脉冲)应力下深亚微米ggnmos器件的特性和失效机理进行了仿真研究。
Secondly, based on WITNESS simulation platform, object-oriented technology, the model of the main production equipment and main transport equipment in gear production line is set up.
其次，基于WITNESS大型仿真平台，应用面向对象技术建立了生产线各关键设备的对象模型，以及齿轮生产线上关键搬运设备的对象模型；
应用推荐