尼龙六六盐；
Toughened, heat stabilized Nylon 66 resin for extrusion.
增韧，热稳定尼龙66树脂挤出。
According to the inner design, the polyamide (nylon 66), etc. made.
根据内圈进行设计，由聚酰胺(尼龙66)等制成。
Objective To study the pulmonary fibrosis of nylon 66 salt particulate in rat.
目的研究尼龙六六盐粉尘对大鼠肺的致纤维化作用。
Plastic to be used for more than PTFE, but also the use of nylon 66 and nylon 1010.
所用塑料以聚四氟乙烯为多，也有采用尼龙66和尼龙1010的。
The development of modified dipped nylon 66 cord and its application were described.
介绍改性锦纶66浸渍帘布的研制与应用情况。
The effects of wollastonite on the structure and properties of nylon 66 were studied.
研究了针状硅灰石粉填充对尼龙66的结构和性能的影响。
Varieties are polyethylene, polypropylene, soft PVC, PTFE, nylon 66, nylon, etc. 1010.
品种有聚乙烯、聚丙烯、软聚氯乙烯、聚四氟乙烯、尼龙66、尼龙1010等。
This paper introduced the tube gauze dyeing process of nylon 66 high force sewing thread.
介绍了尼龙66高强力缝纫线筒纱染色工艺。
The effect of spinning pack of corundum filter plate on spinning for Nylon 66 was studied.
探讨了纺丝组件刚玉过滤板对尼龙66纺丝的影响。
The influence of the humidity on the tensile properties of nylon 66 cord was investigated.
进行了湿度对锦纶66帘线强伸性能影响的试验研究。
Thermal behaviors of high viscosity Nylon 66, prepared by chain extending, have been studied by DSC.
用差示扫描量热法(dsc)研究了扩链法制备的高粘度尼龙66的热行为。
A comparative test was made on the properties and application of modified nylon 66 cord and DSP cord.
对改性锦纶66帘线和DSP帘线的性能及应用进行对比试验。
The application of modified nylon 66 cord in LTR tire was investigated and compared to that of HMLS polyester cord.
研究改性锦纶66帘布在半钢子午线轮胎中的应用，并与高模量低收缩聚酯帘布进行比较。
The effects of spinning process on linear density, tenacity and elongation of Nylon 66 technical yarn were described.
介绍了尼龙66纺丝工艺对工业丝物理性能如线密度、强力、定负荷伸长率的影响。
The influence of montmorillonite(Mont. ) on melting and crystallization behavior of nylon 66 has been investigated by DSC.
通过DSC方法研究了蒙脱土对尼龙66熔融与结晶行为的影响，探讨了蒙脱土对尼龙66结晶的成核作用。
Nylon 66 was effectively toughened with potassium titanate whiskers which were surface modified with an elastic epoxy resin.
钛酸钾晶须用弹性体表面改性后实现了对尼龙66的有效增韧。
Copolyamide hot-melt adhesives were synthesized by caprolactam, nylon 66 salt, nylon 610 salt, decane diamine, sebacic acid, etc.
本论文以己内酰胺、尼龙66盐、尼龙610盐、癸二胺、癸二酸等为原料，合成共聚酰胺热熔胶；
The formulation. process flow and conditions in the production of nylon 66 with continuous condensation polymerization are introduced.
介绍用连续缩聚法生产尼龙66的配方，工艺流程及条件。
The effects of the amount of chain extender on intrinsic viscosity of nylon 66 was studied and the content of end groups was measured.
研究了尼龙66样品的特性粘度随扩链剂用量的变化规律，测定了扩链前后端羧基、端氨基含量的变化。
The paper mainly introduced the application of the modified montmorilonite powder to the Nylon 66 salt industrial waste water treatment.
文章主要介绍了改性蒙脱石粉在尼龙66盐化工废水处理中的应用。
The influence of melting temperature, melting time, crystallization temperature and cooling mode on form and size of nylon 66 was studied.
研究了熔融温度、熔融时间、冷却方式及结晶温度对尼龙66球晶形态和大小的影响。
Material: Nylon 66 certificated by ul, fire-proof standard: 94v-2. Acid and erosion proof, Insulation well, Anti-aging, Hight tensile strength.
材质：采用UL认证之尼龙66料制成，防火等级94v - 2，耐酸、耐蚀、绝缘性好，耐久性、不易老化、承受能力强。
Plastic products, have a good corrosion resistance, the more common use. Varieties are polyethylene, polypropylene, soft PVC, PTFE, nylon 66, nylon, etc. 1010.
塑料制品，有很好的耐腐蚀性能，使用也较普遍。品种有聚乙烯、聚丙烯、软聚氯乙烯、聚四氟乙烯、尼龙66、尼龙1010等。
The paper describes a sudden shutdown of the air separation plant operating in Nylon 66 Salt Corporation due to instantaneous power failure of the compressor oil pump.
介绍了神马尼龙66盐公司空分装置一起由空压机油泵晃电而导致的系统停车，在紧急启动液氮汽化系统过程中由于液氮取出阀内漏所造成的冷箱壁冻裂事故。
The results showed that the modified nylon 66 cord had higher tenacity and tenacity retention, but somewhat lower dimensional stability when compared to HMLS polyester cord;
结果表明，与高模量低收缩聚酯帘布相比，改性锦纶66帘布的强力及强力保持率高，但尺寸稳定性稍差；
The process of spinning nylon 66 elastic yarn are introduced, and the technologies are studied from the aspects of chip drying, spinning temperature, spinpack, cross air blow and oil finish.
介绍了锦纶66弹力丝的纺丝工艺过程，从切片干燥、纺丝温度、组件、侧吹风、集束点位置、上油等几个方面对工艺进行了分析探讨。
The process of spinning nylon 66 elastic yarn are introduced, and the technologies are studied from the aspects of chip drying, spinning temperature, spinpack, cross air blow and oil finish.
介绍了锦纶66弹力丝的纺丝工艺过程，从切片干燥、纺丝温度、组件、侧吹风、集束点位置、上油等几个方面对工艺进行了分析探讨。
应用推荐