SEM photographs showed PES well dispersed in MC nylon 6 matrix.
扫描电子显微镜结果表明，PES均匀分散在基体MC尼龙6中。
The compound of PPTA pulp and nylon 6 is studied in this paper.
对芳纶浆粕与聚己内酰胺复合进行了初步研究。
However, the melt behavior of nylon 6 in blends was nearly unchanged.
而尼龙6的熔融行为基本上没有变化。
The twin screw reactive extrusion process for nylon 6 inland was introduced.
介绍了国内尼龙6的双螺杆反应挤出工艺。
The research on Nylon 6 reinforced by modification is possessed of great significance.
研究尼龙6材料的增强改性具有重要意义。
The glass fiber reinforced nylon 6 was modificated by the filling of the hollow microsphere.
利用空心微珠球型的特性，填充改性玻纤增强尼龙6。
The recovery process of monomer smoke at strand spinneret from nylon 6 production was analyzed.
分析比较了尼龙6生产中注带处单体烟的几种回收方法。
The control system of caprolactam polymerization and nylon 6 spinning are introduced respectively.
对锦纶长丝聚合纺丝部分的自控系统进行了简要的介绍。
The increased distance is in inverse proportion to the content of montmorillonite in nylon 6 matrix.
撑开的距离和蒙脱土在尼龙6基体中的含量成反比。
Modified nylon 6 has been widely used in various fields because of its excellent overall performance.
改性尼龙6因其优异的综合性能在各领域得到广泛应用。
This paper summarizes the research progress of nylon 6 in-situ composite civilly and abroad in recent years.
综述了近年来国内外尼龙6原位复合材料的研究进展。
The main recovery process for nylon 6 residue was analyzed. A new recovery process was proposed and studied.
分析了尼龙6残渣回收的主要方法，提出新的回收方案，并对新方案进行了研究。
Surface hardness improvements of Nylon 6 implanted with ions were linked to mechanism of energy loss of ions.
离子注入后，尼龙6表面硬度提高与离子能量损失机制有关。
Our company is the largest producer of Nylon 6 industrial yarn and Nylon 6 tyre cord fabric in China and Asia.
我公司是中国和亚洲最大的尼龙6工业丝和尼龙6浸胶帘子布的生产厂家。
Wear of nylon 6 and 2% montmorillonite nanocomposite was mainly caused by mechanical wear and viscous friction;
纯尼龙6和2％有机蒙脱土复合材料的磨损属于机械和粘着磨损；
By adding flame retardant into nylon 6, can reinforce insulation of composite materials in which glass fiber adds.
对尼龙6添加阻燃剂，可实现玻纤增强尼龙6复合材料的阻燃化。
Partial matrix yielding caused by this kind of flexible interlayer is the main mechanism of kaolin toughened nylon 6.
这种柔性界面层促使尼龙6基体局部区域塑性屈服被认为是高岭土增韧尼龙6的主要机理。
The results show that the nanoparticles of montmorillonite dispersed in nylon 6 matrix play the role of nucleating agent.
结果表明分散在尼龙6基体中的蒙脱土纳米粒子起成核剂的作用。
Nylon 6 is the early developed species of engineering plastics, its production is one of the largest in polyamide plastic.
尼龙6是工程塑料中开发最早的品种，是目前聚酰胺塑料中产量最大的品种之一（略）。
After glass fiber reinforced nylon 6, the performance index such as tensile strength and bending strength has improved several times.
用玻璃纤维增强尼龙6，使其拉伸强度和弯曲强度等性能指标成倍提高。
Iodine treatment results showed PPESK hindered crystal form transition of matrix nylon 6 due to interaction between PPESK and nylon 6.
碘处理研究发现PPESK对基体尼龙6的晶型转变起阻碍作用，表明PPESK与基体尼龙6间存在相互作用。
A new technique for the durable flame retarding treatment of hydroxymethyl nylon 6 textiles with reactive flame retardants is put forward.
提出以羟甲基改性尼龙- 6织物与反应型有机磷系、溴系阻燃剂进行耐久性阻燃整理的新方法。
The Application in a state of silk mica action reinforcement and glass fiber as composite reinforcing system in Nylon 6 modified was introduced.
本文介绍了绢云母在尼龙6改性中作为增强剂及与玻璃纤维构成复合增强体系的应用情况。
A triple effect evaporation intermittent distillation process is used to recover caprolactam in the extraction wastewater from nylon 6 production.
采用三效蒸发-间歇蒸馏技术，从锦纶6生产装置的萃取废水中回收己内酰胺。
By using computer tomography (CT) instrument, the X-ray shielding property of nylon 6 composite with high tungsten concentration was investigated.
利用计算机断层扫描(CT)仪对高钨含量尼龙6复合材料的X射线屏蔽性能进行了研究。
Reactive compound amine modifiers were introduced during the polymerization of caprolactam and the nylon 6 with amine modifiers modified was obtained.
在己内酰胺水解聚合时加入一定量的可反应型复合胺类改性剂，合成出含有胺类改性剂的尼龙6树脂。
In this paper, three different kinds of polyazomethines(PAM)/nylon 6 in situ polymerization composites were prepared using the process of monomer casting.
本文利用三种聚甲亚胺的单体与尼龙6单体通过原位聚合反应，制备了三种聚甲亚胺/尼龙6原位聚合复合材料，制备工艺采用浇铸法。
As shown by experimental results, the capacity of modified sericite with higher diameter thickness ratio in strengthening nylon 6 is improved significantly.
实验结果表明，高径厚比改性绢云母增强尼龙6的力学性能有显著的提高。
A pretreating method for waste nylon 6 short fiber was proposed to improve the adhesion between short fiber and waste PP matrix and the dispersion of short fiber in matrix.
出一种废尼龙6短纤维预处理方法。采用这种方法能提高短纤维与废pp基质的粘合性能并改善短纤维在基质中的分散。
A pretreating method for waste nylon 6 short fiber was proposed to improve the adhesion between short fiber and waste PP matrix and the dispersion of short fiber in matrix.
出一种废尼龙6短纤维预处理方法。采用这种方法能提高短纤维与废pp基质的粘合性能并改善短纤维在基质中的分散。
应用推荐