The theoretical analysis and numerical simulation of temperature distribution in electromagnetic casting procedure.
对电磁铸造过程温度场进行了理论推导及数值分析。
Numerical simulation of temperature field during al solidification process under static high pressure has been conducted.
采用数值模拟的方法，研究了纯铝在静高压作用下凝固过程温度场的变化情况。
The numerical simulation of temperature field and shrinkage defect prediction for a valve casting, which was involved in 4 kinds of casting proces.
对采用4种不同铸造工艺方案的阀体铸件凝固过程进行了数值模拟及缺陷预测，获得了与试验相一致的模拟结果。
Based on symmetry of the circular light spot of the laser, a two dimensional numerical simulation of temperature fields of laser molten pool has been developed.
利用激光圆形光斑对称性的特点，建立了激光表面快速熔凝条件下温度场的二维数值模型。
This paper mainly does research for the numerical simulation of temperature distribution of barrel of injection molding machine in electromagnetic induction heating.
本文主要研究电磁感应加热器加热注射机料筒时料筒温度分布的数值模拟。
In this paper, the optimum designing method for dimension of ingot mould based on numerical simulation of temperature and thermal stress field in a cycle of use is proposed.
本文提出以钢锭模一个使用周期的温度场和应力场的数值模拟结果为依据优化设计钢锭模的方法。
According to a construction case of substation in Suzhou, 3D numerical simulation of temperature and stress fields of massive concrete during the construction and operation stages is performed.
结合苏州轨道交通地下车站工程实例，对大体积混凝土施工期和运行期温度场和应力场进行仿真计算。
Based on induction heating theory, prediction model of CC slab temperature distribution was built and numerical simulation for induction heating process was carried out.
本文应用感应加热理论，建立了连铸坯料温度分布的预测模型，对感应加热过程进行了数值模拟。
The relevant relations of regenerator medium, exchange time, temperature efficiency and thermal efficiency are analyzed by(numerical) simulation.
通过数值模拟分析了蓄热体材质、换向时间、温度效率和热效率等的关联关系。
Temperature and flow fields, and interfaces of water freezing in soil and crude oil solidifying in the pipeline were obtained through numerical simulation.
通过数值模拟，获得了停输期间温度场、流场以及土壤水分结冰界面和管道中原油凝固界面的分布情况。
The results obtained by both numerical simulation and the measured rock temperature in bores proved that the mathematical expression of temperature distribution law is close to practice.
数值模拟法和地质钻孔测温法所得结果证明，新的地温场温度分布规律表达式是符合客观实际的。
The deformation law of both solid and local upsetting processes for cylinder forging is investigated by moire method at room temperature and numerical simulation in this paper.
本文用常温云纹法与数值模拟法研究了筒体锻件整体镦粗与局部镦粗工艺的变形规律，得到了整体镦粗工艺的坯料尺寸图。
Using the developed numerical simulation software of temperature field, the solidification process of wear resisting cast ball in metal mold was numerically simulated.
利用温度场数值模拟软件对金属型耐磨铸球的凝固过程进行了数值计算。
The model establishment and numerical simulation of SAR and the instantaneous temperature distribution for no-wound tumor rf thermotherapy are performed in this paper.
本文针对非侵入性射频热疗的SAR场及瞬态温度分布进行建模和数值模拟计算。
Numerical simulation of flow and temperature field in the test tube of Model Loop Wax Deposition Apparatus was performed.
对模型环道蜡沉积装置测试段流场温度场进行了数值模拟。
Analysis of numerical simulation is used on flow field and temperature field in mechanical seal cavity.
对机械密封腔内流场和温度场进行了数值模拟。
Secondly, two dimensional conductive model of cooling jacket was set up and numerical simulation was carried out using one dimensional results. Temperature field in cooling jacket was computed.
其次建立了推力室的冷却套二维导热模型，使用数值模拟的方法和一维计算的结果，得到了冷却套的温度场。
Thirdly, the study is the numerical and experimental simulation on that the temperature field of the bed in the snake loop heat pipe chemical reactor.
第三部分为热管化学器内部床层温度场数值模拟与试验研究。
We can know how the liquid metal flows in the mold and the attribution of the temperature field more clearly through the numerical simulation of the model filling process.
铸件充型过程的数值模拟可帮助人们更清楚地了解铸件充型过程中金属液的运动状态及温度场的分布。
The temperature, volumetric water content and water table evaporation strength in varied air convection velocity were obtained by means of numerical simulation and experimental measurement.
通过数值计算和实验测量，获得了不同大气对流速度作用下土壤中温度、含水率分布。
The numerical simulation of the velocity field and temperature field of the natural convection in porous medium with a trapezoid space was conducted.
本文对填充有多孔介质的梯形空间内的自然对流的流场和温度场作了数值计算。
A mathematical model of single base propellant column is established, the core temperature and residual energy of single base propellant are calculated by means of numerical simulation and this model.
建立了单基发射药柱热自燃的数学模型，根据模型利用数值模拟的方法计算了单基发射药的中心温度与其剩余能量，并对中心温度的模拟结果与实验结果进行了比较。
The cause of turbine stator blades was analyzed on the base of numerical simulation by means of air-thermal coupling for heat transfer and temperature distribution.
在内部流场气-热耦合数值模拟的基础上，研究了某涡轮导向器叶片烧蚀故障的原因。
The temperature distribution of the tuyere as well as the influence of impurity and incrustation scale on the temperature field of the tuyere were investigated using numerical simulation method.
为此，用计算机模拟的方法研究了高炉风口的温度分布及杂质含量和水垢对水冷铜风口温度场的影响。
The numerical simulation results indicate that the flow of fuel and air varies with different structures, and as the result is the difference of flame shape and temperature distribution.
数值计算结果表明，结构差异是燃料气和助燃空气的流场组织不同的原因，表现为不同的燃烧火焰形状及温度分布。
Using numerical simulation software, the paper analysis the influence of secondary air to the pollutant discharged in high temperature and low oxygen air combustion.
利用数值模拟软件分析了二次空气对高温低氧空气燃烧污染物排放的影响。
By combining heat transfer theory with computer numerical value simulation, this study simulates temperature field 's variety of CFST with high temperature.
本次研究主要内容是把传热学理论与计算机数值模拟相结合，用以模拟高温(火灾)作用下钢管混凝土温度场的变化。
Welding temperature field numerical simulation method was able to forecast and reflect the real distribution of whole welding temperature field accurately.
焊接温度场数值模拟可以比较准确预测并反映整体焊接温度场实际分布。
The numerical simulation method was used to study the heat transfer and temperature distribution of rolling piece during hot strip rolling.
采用数值模拟方法研究了带钢热轧区轧件传热和温度场分布规律。
Through numerical simulation, this paper studies the distribution of cooling air flow between inner-shell and outer-shell and the temperature control rule of cooling air.
本文用数值模拟的方法研究了冷却空气在内外缸间的流量分配及其温度控制规则等问题，对快冷系统设计有一定参考意义。
应用推荐