Finally the initial research works of scattered wave field characteristics based on numerical simulation by authors were introduced.
并介绍了作者关于地震散射波场特征数值模拟研究的初步成果。
The necessity of carrying out numerical simulation by different stages and the corresponding method of it for high water cut period is put forward in this paper.
针对油田高含水期的特点，提出了划分阶段进行数值模拟的必要性和分阶段数值模拟方法。
The cause of turbine stator blades was analyzed on the base of numerical simulation by means of air-thermal coupling for heat transfer and temperature distribution.
在内部流场气-热耦合数值模拟的基础上，研究了某涡轮导向器叶片烧蚀故障的原因。
As for the numerical simulation by traditional power system component models and parameters, the obtained dynamic frequency curves evidently diverge from measured ones.
采用常规的电力系统元件模型和参数进行数值仿真所得的频率变化曲线与实测曲线偏差较大。
Aerodynamic characteristics and wind pressure distribution of vehicle-bridge coupled system is stud-ied based on numerical simulation by computational fluid dynamic method.
基于计算流体动力学，采用数值模拟的方法研究了车桥耦合体系气动力特性和风压分布。
The temperature field and thermal camber of the roll are made in numerical simulation by finite difference method and the calculation values coincide better with the measured values.
采用有限差分法对轧辊温度场和热凸度进行了数值模拟，计算值和实测值吻合较好。
For a typical assembly stress problem, digital simulation is conducted by means of the hybrid method with different numerical calculation methods.
针对一个典型的装配应力问题，运用不同的数值计算方法，对混合求解法进行了数值模拟。
The parallel computation method was used for numerical simulation of flow field with moving boundary, and unstructured moving grids were generated by spring analogy method.
将并行计算方法应用于含运动边界流场的数值模拟，采用弹簧方法生成非结构运动网格。
In view of dispersion, the application of guided wave NDT of pipe based on magnetostrictive effect was analyzed by the combination of numerical simulation and experimental research.
利用数值模拟和实验研究两种手段，从频散的角度分析了基于磁致伸缩效应的导波无损检测技术在圆管检测中的应用。
It has been revealed by the comparison of numerical simulation results that the macro-failure modes of rock samples are different according to parameters of Weibull distribution at mesoscale level.
通过数值模拟结果之间的对比分析，揭示出岩石试样宏观破坏模式随细观层次上韦伯分布参数的变化而不同。
The method of numerical simulation converts the question of conjugate surfaces into the problem of mathematical programming. The conjugate process can be directly described by numerical simulation.
数字仿真方法将共轭曲面问题归结为数学规划问题，可以应用数字化手段直接描述共轭过程。
The numerical simulation procedure by this method is presented on the construction procedure of a pit.
用该方法对基坑施工的工程进行了数值模拟。
The numerical simulation also shows that fundamental soliton pulses with high repetition rate can be generated in this kind of fiber by modulation instability.
数值模拟显示，利用色散缓变光纤中的调制不稳定性可以产生高重复率的基本孤子脉冲串。
Influences of input optical pulses including the control pulse and probe pulse on the switching window of ultrafast nonlinear interferometer (UNI) are studied by numerical simulation and experiment.
就超快非线性干涉仪(UNI)的输入光特性对其开关窗口的影响进行了数值模拟和实验研究，输入光包括控制光脉冲和探测光脉冲。
The statement is supported by the numerical simulation experiments on facial database of ORL.
ORL人脸数据库的数值实验，验证了上述论断的正确性。
Based on the theory of random process and method of numerical simulation, a new methodology of generating random wind forces by MATLAB software is developed.
基于随机过程理论和数值模拟方法，提出了利用MATL AB软件模拟生成随机风荷的一种新途径。
Propagation of spectra affected by third-order dispersion in dispersion-decreasing fiber near zero dispersion wavelengths was studied by means of numerical simulation.
为探讨三阶色散对脉冲传播的意义，用数值模拟的方法讨论了在色散缓变光纤中零色散波长附近三阶色散对脉冲频谱演变的影响。
By numerical simulation, we achieve the distribution of wind pressure on walls and wind environment at pedestrian level around the towers.
通过数值模拟，获得了幕墙的风压分布情况及塔四周行人高度风环境情况。
Finally we estimate the optimal level of macro - tax burden in China by numerical simulation.
最后通过数值模拟，对中国的最优宏观税负水平进行了估计。
Reliability of the geological model was evaluated by history matching precision of oil reservoir numerical simulation. Static model was validated by dynamic model.
通过油藏数值模拟的历史拟合精度来评价地质模型的可靠性，由动态模型验证静态模型。
Furthermore, the research approaches were also given by using numerical simulation method and experimental simulation method.
还提出采用数值模拟与实验模拟相结合对该模型进行求解的研究思路。
Effect of reversal time on energy consumption for the regenerative soaking pits is researched by numerical simulation and experimental research.
通过数值模拟和实验方法，重点研究了换向时间对蓄热式均热炉能耗的影响。
By numerical simulation method, the comparisons of aerodynamic performance between airfoil and plate blade axial fans were made.
采用数值模拟方法对机翼型及板型叶片的轴流风机的气动性能进行了比较。
The available scope of prediction distance can be determined in light of the stress concentration ascertained by numerical simulation for stress field.
可以通过应力场数值模拟得出的应力集中区来确定有效预测距离的范围。
The calefaction and acceleration process of ceramic powders in plasma spray were studied by numerical simulation.
通过数值模拟研究了等离子喷涂陶瓷粒子的加热加速行为。
This article also compares reload stock option with geometric Asian-reload stock option in the manager's role by numerical simulation.
还通过数值模拟分析比较了传统再装期权与几何亚式一再装股票期权在经理激励中的作用。
The relevant relations of regenerator medium, exchange time, temperature efficiency and thermal efficiency are analyzed by(numerical) simulation.
通过数值模拟分析了蓄热体材质、换向时间、温度效率和热效率等的关联关系。
Finally, the time dependence influence of the new tunnel's construction to adjacent building was analyzed by numerical simulation method.
最后，采用数值模拟的方法分析了新建隧道的施工对邻近建筑物的时间相关性影响。
Finally, the time dependence influence of the new tunnel's construction to adjacent building was analyzed by numerical simulation method.
最后，采用数值模拟的方法分析了新建隧道的施工对邻近建筑物的时间相关性影响。
应用推荐