In this paper, an organic combination of surface molding and numerical calculation is applied to optimization design for centrifugal pump impellers.
本文将曲面造型与数值计算有机的结合在一起应用到离心泵叶轮的优化设计中。
The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
The theoretical and numerical methods of structural design optimization for offshore platforms are studied in this thesis.
本文主要研究了导管架海洋平台结构系统优化设计的理论与数值计算方法。
A numerical example shows that the structural analysis and optimization design model and method in this paper are valid and feasible.
算例表明：文中提出的随机结构分析和优化模型与设计方法是合理、可行和有效的。
In this dissertation, Numerical Aerodynamic Optimization method is attempted to apply in the inlet design.
本文尝试采用气动优化设计方法进行进气道的设计。
The study provides effective numerical analysis method and theoretical basis for the design and optimization of automobile semi axle cross wedge rolling.
研究结果为优化和设计汽车半轴楔横轧设备提供了有效的数值分析方法和理论依据。
Cold rolling technology is applied to ring parts extensively. In the process of numerical simulation and optimization of cold rolling, roundness is a key object variable of the design.
冷辗工艺广泛应用于环件的加工，在冷辗环数值模拟与优化过程中，圆度是重要的目标设计变量。
Full detail knowledge during forming process can be given by using numerical simulation, which could support for process design and dies optimization.
利用数值模拟方法，可以明确整个成形过程的全部细节问题，为工艺设计和模具优化提供强有力的支持。
Numerical examples show that this proposed method is practicable in engineering the optimization design of the thin wall structure.
实例计算表明这种方法在薄壁结构优化设计应用中具有实用价值。
The results of the numerical simulation will provide a more reliable basis for furthering the optimization of the aerodynamic design of gas solid two phase turbine blades.
数值模拟结果将为进一步优化气固两相透平叶片的气动设计提供更可靠的依据。
The numerical simulation methodology and optimization algorithms are integrated to optimize gate location of mold design. A new optimization method of experience search is founded.
在此基础上，将数值模拟技术和优化算法相结合，提出了基于数值模拟技术的浇口位置的优化方法：经验搜索法。
The mathematical model of two-objective fuzzy reliability optimization design for swing movable teeth drive is put forward. A numerical example is given.
建立了摆动活齿传动的双目标模糊可靠性优化设计数学模型：并给出了计算实例。
Through optimization of numerical simulation, thermal recovery design and corresponding oil recovery technology, the reasonable development policy is determined and some good results have been gained.
通过数值模拟优化、热力开采设计及相应的采油工艺配套设计，确定了合理开发对策，取得了较好开发效果。
A numerical result of an optimization design based on reliability and redundancy subject to cost in complex system is provided in the paper.
给出了一复杂系统在造价约束下的可靠度和冗余数的并发优化设计结果。
Numerical simulation result shows that this method can be used for rapid evaluation of sheet metal forming process design and for the optimization of process parameters.
实例证明，一步模拟法可用于板料成形工艺方案的快速评价及参数优化。
Numerical example is investigated to demonstrate the efficiency of the method. The method can offer the necessary theoretical basis for multi-disciplinary uncertain design optimization.
通过算例验证了该方法的有效性，对处理多学科不确定性优化设计问题有一定的指导意义。
A numerical optimization method of airfoil maximum lift design by solving adjoint equations based on ns equations is studied in this paper.
使用控制理论方法建立了对翼型最大升力优化设计的模型。
It shows that the numerical simulation is an effective method to analyze and design welding transformer. It is the base of optimization design of welding machine.
数值模拟是分析和设计焊接变压器的有效手段，可作为进一步焊机优化设计的基础。
The numerical analysis method, especially the finite element method (FEM) has become the primary tool of numerical analysis and optimization design in geotechnical engineering.
数值分析法，尤其是有限单元法已经成为岩土工程数值分析和优化设计的重要工具。
The numerical simulations show that each design solution satisfies all the compulsory criterions and the new method has a better ability for global optimization.
数值仿真结果表明，所有优化结果的性能指标均满足必备指标要求，且新方法具有很强的全局搜索能力。
Numerical simulation shows that FE inverse approach can be used for rapid evaluation of sheet metal forming process design and for the optimization of the process parameters.
分析计算实例表明，逆算法可用于对板料成形工艺方案进行快速评价，对冲压工艺参数进行优化。
In order to improve the efficiency and accuracy of the numerical calculation for the aerodynamic design of winglets, an optimization method based on multi-level response surfaces is proposed.
为了提高数值计算效率和准确性，提出了基于多级响应面法的确定翼梢小翼气动外形参数的一种优化方法。
The results of numerical calculation about this scheme agree with the information in the literature from abroad. It laid the foundation of the design optimization about this scheme in the future.
对这种方案，本文建立了小信号分析模型，并在高功率条件下做了许多的数值计算研究，其结果与国外论文数据比对是相符合的，为以后的设计优化工作的进行奠定了理论基础。
Research on numerical simulation of dewatering effect and design optimization;
研究表明，溶液的降黏效果与溶液的初始黏度有关。
Research on numerical simulation of dewatering effect and design optimization;
研究表明，溶液的降黏效果与溶液的初始黏度有关。
应用推荐