An error measuring system for multi-location numerical control cutter holder was developed by adopted non-contact photoelectric measuring method.
采用非接触光电式测量方法，设计了多工位数控刀架误差测量系统。
Based on the specialities of numerical control (NC) of power spinning machine tool, this paper described the process of generating NC code from the cutter location track file.
描述了根据数控强旋机的特性，从已有的刀具轨迹文件出发，经过一系列处理生成了数控代码的过程。
In numerical control system, cutter radius compensation always USES a straight transition method.
在数控系统中刀具半径补偿的方法常采用直线过渡。
This article discussed the multi-thread technology application in numerical control system software design of flame cutter based on the movement control card.
讨论了基于运动控制卡的火焰切割机数控系统的软件设计中多线程技术的应用。
Research the numerical control system software functional design of flame cutter.
研究火焰切割机数控系统软件的功能设计。
The principles for obtaining numerical control (NC) data and for generating collision free cutter location data were developed for a 6TPS tool.
以6-TPS型并联机床为结构模型，阐述了数控代码生成原理及无干涉刀位文件的生成方法。
The design of the special cutter makes three coordinate numerical control slope cutting metal sheets be realized.
专用刀具的设计使三坐标数控倾斜切削金属薄板得以实现。
The basic function of the CAM module, including setting up cutter manager, tool path generating, tool path simulating, and numerical control code automatically producing.
CAM基本功能模块，包括刀具库管理、刀具轨迹生成、后置处理、轨迹仿真、数控代码自动生成等功能。
This article is about how to fully make use of the command of cutter length compensation and the using skills in numerical control programming.
介绍了在数控机床编程中，如何能更好地使用刀具长度补偿指令及其使用技巧。
Cutter radius offset orders in numerical control (NC) milling manufacturing procedure are expounded and cutter radius offset procedure is analyzed.
阐述了数控铣削加工过程中的刀具半径补偿指令和刀具半径补偿过程。
Under the numerical control technology the spiral milling cutter may gain satisfactory product. But undoubtedly the reduce dimension's technology provides possibility of saving its cost.
螺旋铣刀在数控技术下可获满意产品，但降维技术无疑为其节省成本提供可能。
The post processing is an important part in the programming of numerical control, by using it, the cutter location file from CAM system can be converted into machining code.
后置处理是数控编程的重要环节，它的作用是将CAM系统生成的刀轨文件转化为机床的加工代码。
When numerical control of machine tool is operated, if the cutter radius compensation is applied inappropriately, the phenomenon of over-cutting will appear.
数控机床在使用刀具半径补偿时，如果使用不当，将会出现过切现象。
This paper introduces the application of PMAC numerical control system in clothes cutter machine. Hie hardware structure and working principal of the numerical control system is described.
介绍了基于PMAC的开放式数控系统在栽剪机中的应用，论述了数控系统的硬件构成和工作原理。
While using arc slotting in the process of numerical control, how to determine the ways of cutter cuts-over and cuts off, this paper puts several practical ways from production practice.
对在数控加工中应用圆弧插补时，如何确定刀具的切入和切出。从生产实践中，提出了几种实用的方法。
This numerical control gear cutter has the production efficiency to be high, the processing quality is stable and structure simple and so on characteristics.
该数控铣齿机具有生产效率高，加工质量稳定和结构简单等特点。
This numerical control gear cutter has the production efficiency to be high, the processing quality is stable and structure simple and so on characteristics.
该数控铣齿机具有生产效率高，加工质量稳定和结构简单等特点。
应用推荐