Preparing the nickel electrode on PTCR semiconductive ceramics by thick-film firing method were researched.
对用厚膜烧成法在PTCR半导瓷上制备镍电极进行了研究。
The nickel electrode formation mechanism and its contact characteristic with PTCR semiconductive ceramics were discussed.
讨论了镍电极的形成机理及其与PTCR半导瓷的接触特性。
Neodymium can increase weld metal hot cracking susceptibility of the pure nickel electrode used for cold welding of cast iron.
纯镍铸铁焊条中加入稀土钕会增加焊缝热裂敏感性。
The experiment indicated the nickel electrode by sintering in atmosphere can be possible to form the good ohm contact with PTCR.
实验表明空气中烧渗镍电极可以和PTCR形成良好的欧姆接触。
A novel glucose sensor without enzyme has been prepared based on the electrochemical oxidation of glucose at a nickel electrode.
基于葡萄糖在镍电极上的电化学氧化,制备了无酶葡萄糖传感器。
The technical conditions of preparation of plastic-bonded nickel electrode for high rate discharge and the possibility of their …
本文还简要讨论了制备粘结式高性能镍电极的基本技术条件和实际应用的可能性。
The method was effective in analysing the content of nickel and phosphor of the platinized nickel electrode, and the relative error range to the standard was not more than 5.0%.
将该方法用于镀镍电极的镍磷含量分析,测定结果的相对标准偏差不大于5.0%。
The influence of Lanthanum, Cerium, Yttrium, Praseodymium and Neodymium on weld hot cracking susceptibility of the pure nickel electrode used for cold welding of cast iron was studied.
研究了纯镍铸铁焊条冷焊时,稀土金属镧、铈、镨、钇及钕对焊缝热裂纹敏感性的影响规律,并分析了铈对焊接接头力学性能和加工性能的影响。
Based on the cyclic voltameter it could be concluded that in the working potential reign of the nickel electrode steel under the micropores was in the passive state and could not corrode.
循环伏安图谱说明,在镍电极工作的电位区域,微孔中钢铁处于钝态,不会腐蚀。
The effect is caused by the increase of nickel concentration on the electrode surface.
这种结果是由于电极表面镍浓度的增加所引起的。
The content of carbonyl nickel powder used as conduct agent almost does not affect the maximum discharge capacity of this alloy electrode.
而导电羰基镍粉含量的变化对合金电极的放电容量几乎没有影响。
The polarization of electrode decreased and the heavy load discharge performance of battery were improved by using foamed nickel.
使用发泡镍可降低电极的极化,改善电池的大电流放电性能。
A novel method to fabricate magnetic nickel nanostructures onto the interface of gold electrode pairs is presented by magnetic field-assisted selective chemical deposition of nickel.
结合磁场诱导与选择性化学沉积,在微米级间隙金电极界面上原位生长镍纳米线。
Nickel oxide films are now considered to have excellent electrochromic performance, which can be used as electrochromic films and also as the ion storage electrode in electrochromic devices.
氧化镍薄膜是目前发现的性能最好的电致变色材料之一,它不仅能够用作电致变色薄膜,还可以作为电致变色器件的离子存储电极。
The investigation of effects of rare-earth yttrium and boron, which are in the 3.5% nickel-containing steel welding electrode on low temperature toughness has been carried out.
对含镍3.5%低温钢手工电焊条配方中稀土钇与硼的作用进行了试验研究。
T255 type carbonyl nickel powder can form controllable high-rate gap baking electrode.
羰基镍粉可形成受控制的高空隙烧结电极。
Pure nickel silk with steady potential in KOH solution could be used as reference electrode.
镍作参比电极在氢氧化钾溶液中的电极电势稳定。
The electrochemical techniques of encapsulating the amorphous nickel-nonmetal alloy on the surface of hydrogen-storage alloy electrode or hydrogen-storage alloy powder was used in this paper.
本论文提出了用电化学的方法在储氢合金电极或储氢合金粉表面包覆镍-非金属非晶态合金的工艺方法。
High chromium-nickel alloy side electrode maintains.
高质量铬镍合金侧电极保持精确的间隙。
The technology of produce cadmium carbonate with spent forth cadmium electrode plat which from the product of nickel-cadmium battery, was investigated.
探讨了用镍镉电池生产过程中产生的废泡沫式镉极板生产碳酸镉的工艺技术。
Based on experiments, the coating compositions of nickel ferro type cast iron electrode have been worked out using regression method and computer - aided optimization.
在试验的基础上,应用二次混料回归设计试验方法设计镍铁型铸铁焊条药皮渣系的配方,借助计算机辅助优化,获得了综合工艺性能优良的镍铁型铸铁焊条。
For identifying various electrode polarization during discharge of nickel metal hydride battery, a transient technique current step method was employed.
利用暂态技术电流阶跃法对镍氢电池的正负极在放电过程中的电化学极化、浓差极化及欧姆极化进行了研究。
Lithium nickel oxide as the positive electrode of rechargeable lithium ion batteries with a high energy density and lower cost has aroused more and more interests.
镍酸锂作为高性能、低成本的锂离子电池正极材料已倍受关注。
Mass production of a new generation of patented products - multi-purpose ozone power supply, the introduction of nano-nickel alloy electrode supporting film ozone.
批量生产的新一代专利产品—多用途臭氧电源,引进纳米镍钛合金电极臭氧发生片配套。
Mass production of a new generation of patented products - multi-purpose ozone power supply, the introduction of nano-nickel alloy electrode supporting film ozone.
批量生产的新一代专利产品—多用途臭氧电源,引进纳米镍钛合金电极臭氧发生片配套。
应用推荐