After establishing a link connection and completing authentication, PPP starts a Network Control Protocol (NCP).
建立链接并完成身份验证以后，PPP将启动网络控制协议(Net work Control Protocol,NCP)。
On the other hand, if you control the client, service and network, then you can use binary encoding, TCP as the protocol.
另一方面，如果你要控制客户端、服务和网络，则可以使用二进制编码，并使用TCP协议。
Recall that the Internet protocol (IP) is the core network layer protocol that sits below the transport protocol (most commonly the Transmission Control protocol, or TCP).
回想一下，InternetProtocol (IP)是传输协议(通常称为传输控制协议或TCP)下面的核心网络层协议。
You can set the IP addresses for these network cards manually or use a Dynamic Host Control Protocol (DHCP) server.
您可以为这些网卡手工设置IP地址，或者使用动态主机控制协议（Dynamic Host Control Protocol，DHCP）服务器。
The PPP control protocol for this network protocol is not available on the server.
在该服务器上PPP控制协议对于整个网络协议是不可用的。
To realize automatic response, a method that utilizes SNMP protocol datagram to control network devices is used.
为实现自动化的响应，本文采用了通过SNMP协议数据报去控制网络设备的方法。
As the 3GPP began looking at ways to implement IP in their networks, they found a need to standardize first of all on one implement standard network common protocol for call and session control.
当3GPP开始需求在他们的网络中实现IP的方法时，他们发方法开始需求觉首先要对呼叫和会话控制中单一共有的协议进行标准化标准化进行会话。
This paper discusses the properties and communication protocol of LIN, and then illustrates the solution of body-control network in which LIN is applied.
本文介绍了LIN的特点及通讯协议，并以实例介绍了LIN应用于车身控制网络的解决方案。
This paper designs a CAN-based hybrid control network, proposes a new hybrid real-time communication protocol, and verities the protocol in hardware.
文章基于CAN协议，设计出有线和无线混合控制网络，提出了一种新型的混合网络实时通讯协议，并通过硬件实现验证了设计的正确。
TCP is a transport protocol providing transmission of data over IP networks, and IP is a network protocol containing addressing and control information that allow for data to be routed.
TCP是通过IP网络提供数据传输的协议，IP是一个包含寻址和控制信息，允许数据路由的协议。
It is not a single but a system integrated with several technologies constructing communication network, including Signaling Protocol, Voice Codec, Media Transport and Gateway Control.
它不是单一的一种技术，而是综合了通讯网络的多种技术在内的一个系统，包括了信令协议、语音编解码、媒体传输和网关控制。
For primary server may become the bottle of the whole system, VCSR USES a concurrency control protocol based on voting, which also trade-off the network overhead.
针对主服务器可能成为系统中瓶颈的问题，VCSR机制采用基于投票的分布式并发控制协议，同时也均衡了网络负载。
The LIN protocol is described in detail, a solution of automobile body control system is designed, and then the hardware and software of the network node is designed.
对该协议进行较为详细的描述，设计一种车身控制系统的解决方案，并对控制网络的节点进行硬件电路设计和软件设计。
The software carried on the transmission protocol realization, the instrument remote control and the system software design, so connected the ethernet to made up the embedded network instrument.
软件方面进行了传送协议实现、仪器远程控制和系统软件的设计，接入以太网，组成嵌入式网络仪器。
TTCAN protocol has been designed for hybrid electric vehicle according to the structure of control system and the real-time demands of controller network.
根据某混合动力电动汽车控制系统结构和控制器网络对信息实时性的需求，设计了该车的TT CAN协议。
The design of control node of home network control system is described. The design includes hardware, software, and the development of wireless communication protocol.
介绍了家庭网络控制系统的控制子节点设计，控制子节点的软硬件的设计与开发，无线通信协议的设计与开发。
In the paper, a practical compound network structure is discussed, that is used in a quality control system (QCS) on paper-making, meanwhile we talk over some protocol of correlative communication.
论述了一种实用于抄纸过程质量控制系统(QCS)的计算机混合式网络结构，并讨论了各类相关的通讯协议。
MGCP is an important protocol used to control media gateway in next generation network developed by IETF.
MGCP是IETF制定的下一代网络中用于控制媒体网关的重要协议。
We designed a media access control (MAC) protocol for ATM based passive optical network (ATM-PON).
针对基于AT M的无源光网络(atm -PON)设计了一种媒质接入控制(MAC)协议。
Media gateway control protocol is the important protocol in next generation network, it is the control protocol between soft switch devices and media gateway.
媒体网关控制协议是下一代网络演进中的重要协议，是软交换设备与媒体网关间的控制协议。
And then, it introduced this research, the control network protocol of XMAP, constructed the model of achieving control network based on this research.
然后概括介绍了本研究—XMAP控制网络协议，构建了基于本研究的控制网络实现模型。
The FOCS (Filedbus Openning Control System)in network communication realization technology is introduced combined with the example, on the base of TCP/IP protocol.
结合生产装置实例，介绍了FOCS在基于TCP/IP协议下网络通信的实现方法。
Media Gateway Control protocol (MGCP) is a important protocol in NGN network.
媒体网关控制协议是NGN网络中一个重要的协议。
The network topology control and the MAC protocol will exert great influence on the energy consumption of the sensors node.
网络的拓扑控制和MAC协议对传感器节点的能量消耗和延时会产生重大影响。
Connection constraints are flooded using an extension to a routing protocol being used to control forwarding on network.
通过使用正被用于控制网络上的转发的路由协议的扩展来扩散连接约束。
Firstly, this thesis studies the widely used class of network transmission control protocol, namely TCP flow sending rate model.
本文首先对广泛应用的网络传输控制协议TCP流的发送速率模型进行研究和分析。
Aimed of providing home appliance control system in Digital Community, this paper complete the design of home Network Communication Protocol step by step.
本文以在数字社区中提供家电控制服务为目标，逐步实现家庭网络的通信协议设计。
A TTCAN protocol has been designed for hybrid electric vehicle according to the structure of control system and the real-time demands of controller network.
根据某混合动力电动汽车控制系统结构和控制器网络对信息实时性的需求，设计了该车的TT CAN协议。
S-MAC is a medium access control protocol based on competition for wireless sensor network.
MAC协议是一种适用于无线传感器网络的基于竞争的MAC协议。
Since the UDP protocol is non-connection, a transfer control should be taken on the high level to avoid high packet loss when the network is bad.
而UDP协议是无连接的，因此要在上层对用户数据报协议包的发送速率进行控制，来避免在网络情况不良的时候，产生较大的丢包率。
应用推荐