It has functions such as remote call, nc program management and so on, and drip feed is supported.
所开发的系统具有数控程序远程调用、程序库管理等功能，并支持数控设备的在线加工。
This method is low processing efficiency, low machining accuracy, and the nc program is too large.
这种方法加工效率低下、加工精度低、并且数控程序过大。
Based on the developmental tendency of nc machine tool with net, this paper puts forward a new technology of transferring nc program by net.
针对数控机床网络化的发展趋势，本文提出一种新的数控程序网络传输技术。
To improve the efficiency decreased by feed rate in traditional nc program, a nc program optimization system is developed for rough milling process.
针对传统数控程序中进给速度固定限制加工效率的缺点，开发了面向粗铣加工的数控程序优化系统。
As an important part in the nc programming, the function of post-processing is to transfer the cutter location file into the nc program suitable to nc machine tools.
作为数控编程技术的重要内容，后置处理的作用是将通用的刀位文件转换成适合于数控机床加工的NC程序。
The nc machines send a nc program with predefined instructions to the DNC host, then the host analyses the nc program and executes the instructions, so the function of remote call is realized.
数控设备通过向DNC主机发送含有约定命令的数控程序，DNC主机经分析该程序后执行相应的命令，实现NC程序的远程调用。
This article introduces a means of nc program about rough cut of helicoid base on helix-milling. The means can improve efficiency of cutting, reduce the cutting abrasion, depress the operating costs.
基于螺旋线数控铣削的螺旋曲面粗加工的方法可大大提高加工效率，减少刀具磨损，降低加工成本。
CNC lathe; variable pitch screw; NC Program; on the cutting point; graphic method;
数控车；变螺距螺杆；NC程序；起刀点；图解法；
Tool track creation method is the base and key of mold high-speed milling NC program.
刀具轨迹生成方法是模具高速加工数控编程的基础和关键。
There must be a coding process from NC program to interpolation module to control machine.
数控加工程序需要经过译码处理后，才能提供给插补模块进行运动控制。
Furthermore, an NC program of dealing with complex curve contact rollers has been developed.
编制了用于复杂曲线滚轮的数控程序。
Programming and application of NC Program for workpiece machined by planer type miller is introduced.
介绍了数控龙门铣床加工工件所用的数控程序的编制与应用。
Based on the macro program of Hua-zhong NC system, it designs the milling NC program for outside hemisphere.
通过对华中数控系统中宏程序的发掘利用，顺利在经济数控铣床上实现了外半球的加工。
The former realizes automatic formation of NC program and the last simulates NC tool hardware interpolation process.
自动编程系统实现数控加工程序的自动生成。
The machining skill and relevant NC program of machining worm screw with large pitch using a NC lathe are introduced.
介绍了一种在数控车床上加工大螺距蜗杆的切削技巧以及相应的数控程序。
The method can improve processing precision and simplify NC program, and shorten processing time by means of examples.
通过实例表明该方法可以提高加工精度、简化数控程序、缩短加工时间。
The result shows that it is a very important way to improve the ability of NC processing in industry using NC program module of UG.
指出应用好UG提供的强大的数控加工编程功能是提高企业数控加工应用能力的一个重要途径。
Previous interface information between CNC system and design systems is the ISO6983 standard, that is, using g, m code of the NC program.
以往数控系统与设计系统的接口信息采用的是ISO 6983标准，即采用G、M代码的数控程序。
NC program edit and management are realized, and receiving NC program edited in other computer by RS232 serial interface is also achieved.
实现了数控程序的编辑和管理，以及通过RS232串行接口接收用户离线编写的数控程序。
The paper expounds the method of design about wave spring curved surface, the processing NC program and its technological processing course.
阐述了波形弹簧成形模曲面的确定及其数控加工程序的编制方法、加工工艺过程。
This system can recognize the features automatically and make process planning with human-computer interaction, and then generate STEP-NC program.
该系统可进行自动特征识别，经人机交互方式进行工艺规划，最终生成STEP-NC数控程序。
A simulation system of NC turning based on STEP-NC is presented for verifying STEP-NC program and simulating running conditions of the actual system.
提出了一种基于STEP -NC的数控车削加工仿真系统，该仿真系统能够验证STEP - NC数控程序、模拟实际系统运行。
Moreover, the system could quickly, directly and accurately generate not only the detailed drawing of high precision form tools, but also the NC program.
借助该系统可直接快速、准确地生成高精度成形车刀工作图，以及成形车刀的数控加工程序。
On the basis of comparison between STEP-NC Program and G/M code, the structure, characters and application of STEP-NC in CNC System are analyzed in details.
在对STEP-NC与G/M代码进行比较的基础上，详细地阐述了STEP-NC程序结构、特征以及其在CNC系统中应用和地位。
Taking NSR_40 Roots blower as an example, the processing ways, technics and NC program of this twist tri_lobe profile on the lathe machining center is set forth in detail.
以nsr - 40型罗茨鼓风机的三叶扭叶叶轮为例，详细阐述了这种叶轮型面在车削加工中心的加工方法、工艺和数控编程。
While machining turbine blade simply by Parallel machine Tool (PMT), NC program development is often limited by workspace of PMT, and it is difficult to process at the best posture.
用并联机床加工汽轮机叶片时，往往受其工作空间的限制而不能在最佳的切削姿态下进行加工。
While machining turbine blade simply by Parallel machine Tool (PMT), NC program development is often limited by workspace of PMT, and it is difficult to process at the best posture.
用并联机床加工汽轮机叶片时，往往受其工作空间的限制而不能在最佳的切削姿态下进行加工。
应用推荐