Establish the fuzzy matter element assessment model of green products with multi-index performance parameters of products.
建立了产品多指标性能参数的绿色产品模糊物元评价方法模型。
Based on the multivariable random drilling model, the multi objective reliability optimization of deep well drilling parameters is presented.
在多元随机钻井模式理论的基础上，提出了深井钻井参数多目标可靠性优化方法。
For the Multi loop model of the synchronous motor, this paper calculated all the parameters, including the leakage inductance.
在运用多回路法建立的同步电机数学模型中，计算了包括漏感在内的详尽的参数。
It introduces the multi-objected optimization model of the metal milling process parameters and applies the goal attainment method to ask for the explanation for the model.
方法引入了金属铣削加工参数多目标优化模型，应用目标达到法对模型求解，又基于神经网络建立了金属铣削参数自动获取模型。
Introducing the leakoff coefficient related with time, a new calculating model with multi parameters based on the dynamic fluid leakoff experiment is established.
通过引入与时间相关的滤失系数的概念，建立了基于动滤失实验的多参数的滤失计算新模型。
By summarizing the structural characteristic parameters of multi layer wovens, some design criteria for multi layer wovens are put forward, and a geometric model is established.
归纳了多层机织结构的特征参数，提出了多层机织结构的设计原则，建立了多层机织物的几何结构模型。
On the basis of it, the method of establishing the mathematical model is also suitable for calculating the reliability of motion of plane multi bar linkages by changing the parameters of the model.
并在此基础上通过改变模型参数，使该建模方法同样适用于解决平面多杆机构的运动可靠性问题。
By using the DFREML method of multi-traits animal model, the genetic parameters on reproduction performance of China Yorkshire SII line were estimated.
应用多性状动物模型D FREML方法估计了中国大白猪SII系繁殖性状的遗传参数。
The fuzzy model of multi-objective system is applied to optimal selection of dynamic compaction parameters so as to realize quantization of qualitative problem.
将一种多目标系统的模糊模型用于地基强夯参数的优选，使这种定性的问题得到了定量化的处理。
The case result shows that the multi-layer recursive time series model is effective in analyzing the time-dependent characteristics of parameters, and has considerable prediction precision.
实例分析和计算表明，多层递阶时间序列模型能较好地反映参数的时变特性，取得较精确的沉降预测结果。
Adopting new type diagonal regression neural network to identify the system model, the parameters of PID controller have been set, and the multi -variable decoupling control being realized.
采用新型对角回归神经网络来辩识系统模型，可对PID控制器参数进行整定，实现多变量解耦控制。
This paper proposes a new mathematical model and an algorithm for multi-objective optimization of the overall parameters of the most widespread powered support -shield.
本文提出了支撑掩护式液压支架总体参数多目标优化设计的一个新的数学模型和算法。
In this paper, through analyzing cutting process and using fuzzy theory, a model of synthetic judgement for optimizing cutting parameters of multi-factors and multi-levels is developed.
利用模糊数学理论，通过对切削加工的分析，建立一套综合评判模型，以优化多因数多水平的切削加工参数。
Based on multi-shelled dielectric model of spherical cell, calculation method for the influence of cellular parameters on transmembrane potentials on inner and outer membrane was presented.
基于球形单细胞多层介电模型，提出了细胞电参数对内外膜跨膜电位影响的计算方法。
A dynamic catalyst coking model and multi-variant linear regression model are used to estimate the parameters of catalyst coking model.
提出了采用动态结焦模型以及新鲜催化剂结焦速率的线性回归模型来估计结焦模型参数的方法。
Simulation results of a disturbed pre-fractionator show that this algorithm can be used to solve on-line parameters-recognized problem of a kind of multi- neural networks model effectively.
对处于扰动状态下的预分馏塔的仿真结果表明，该算法可以有效地解决一类多神经网络模型的在线参数辨识问题。
The analysis model was set up to solve main technical problems in the commission of alignment parameters for the multi-rotor system.
针对多转子系统轴系的对中参数调试问题，建立了调整关系分析模型。
The model could be used to analyze on multi-targets of multi-factors, and also be used to design or choice the type of rubber extruder on the purpose of finding the optimization parameters.
该模型可以进行多影响因素下的多目标分析，并应用于橡胶挤出机的结构选型、结构设计、找出最佳的工艺参数等。
The cascade PID controller was designed off-line, and how to choose the stable control parameters was introduced. Then the whole multi-controller maglev coupling system model was given.
离线设计单个串级PID控制算法并给出了稳定参数选择方法，并由此建立多控制器磁悬浮耦合系统模型。
The improvement on solving Earth Orientation Parameters (EOP) model is introduced. The improved model is more conformable to high precision of SLR data and is used in multi-arc method.
详细介绍了与SLR观测资料的高精度相适应的解EOP模型的改进，并且在复弧法中使用这个改进模型。
The simulation calculations show that the time parameters obtained by using this new model and those obtained by using the multi-dependency network scheduling technique are altogether in agreement.
模拟计算表明，用该方法与用标准搭接网络计划技术计算出的时间参数完全一致。
This paper offers an assumed model called system weighted Average Tranafer Function of a linear vibration system to identify the complex modal parameters by using multi-point measured frequency data.
本文提出用多点频响函数来识别系统的复模态参数，建立了系统加权平均传递函数的假设模型。
During the model test, integrity modal parameters are obtained via the single-input multi-output analysis method. The reliability of tests signals is also evaluated by the coherence function.
模态测试时，利用单点(多激振点)激励多点响应模态试验分析方法来获取完整模态参数，引入相关函数分析测试信号的可靠性。
The parameters of the model are obtained by means of monotonic compressive, single state fatigue and multi-stage fatigue combining with monotonic compressive tests.
完成了混凝土单调加载、单级疲劳和多级疲劳继而单调加载试验，得到了模型中的参数。
The multi-potential surface model in strain space is more practical, since its parameters are easy to be determined, and the program based on the model is easy to be developed.
多重势面模型直接从数学原理出发建立本构关系，避开了传统塑性理论中屈服面的概念，为研究岩土工程材料本构模型提供了新的思路。
Through numerical computation of model parameters, the effect of factors such as multi-track pattern. turning style. and t...
对模型进行的数值计算分析了多履带的不同布置方案、转向方式及驱动履带条数对转向性能的影响。
Through numerical computation of model parameters, the effect of factors such as multi-track pattern. turning style. and t...
对模型进行的数值计算分析了多履带的不同布置方案、转向方式及驱动履带条数对转向性能的影响。
应用推荐