It introduces the multi-objected optimization model of the metal milling process parameters and applies the goal attainment method to ask for the explanation for the model.
方法引入了金属铣削加工参数多目标优化模型，应用目标达到法对模型求解，又基于神经网络建立了金属铣削参数自动获取模型。
An optimization model for the redundant multi sensor system and the criteria with a minimum cost which fulfill the systems availability constraint are presented.
从系统有效度和系统代价出发提出了一种多传感器冗余系统的优化模型和满足有效度约束的最小代价准则。
Based on the multivariable random drilling model, the multi objective reliability optimization of deep well drilling parameters is presented.
在多元随机钻井模式理论的基础上，提出了深井钻井参数多目标可靠性优化方法。
The multi minerals model analysis of optimization explanation can study and evaluate complex hydrocarbon reservoir adopting a great of logging formation and many kinds of models.
多矿物模型分析的最优化解释能采用多种测井信息和多种模型来研究和评价复杂油气层。
Taken account of the influence of stochasticness and fuzziness, multi objective reliability fuzzy optimization model of DH106 dynamic box is established.
考虑随机性、模糊性的影响，建立了DH106动力箱的多目标可靠性模糊优化模型。
Based on the cable-stayed bridge using method of cantilever, the paper establishes the optimization model of construction phase with multi-objective and multi-constraint and gives the example.
采用多目标、多约束的优化方法，以悬臂施工主梁的斜拉桥为例，建立了施工阶段的优化模型，并给出算例。
A new multi-objective optimization evolutionary algorithm based on the model of cooperative co-evolution is proposed in this paper.
基于合作型协同进化模型，提出了一种新型的多目标优化进化算法。
The linear multi goals optimization mathematics model is adopted, and the optimization design on PVC heat stabilizing system is carried out.
采用线性多目标优化数学模型，对PVC多元复合热稳定体系的配方进行优化设计；
In the paper a new method of using disc shaped spring in the multi way valve as reset spring is introduced, and the design model for characteristic optimization of reset spring is created.
本文提出了采用碟形弹簧，作为多路阀复位弹簧的新方法，建立了这种复位弹簧的特性方程及优化设计模型。
Taking account of the influences of randomness and fuzziness, multi objective reliability fuzzy optimization model of DH106 dynamic box is established, and it is solved by the above mentioned method.
考虑随机性、模糊性的影响，建立了DH106动力箱的多目标可靠性模糊优化模型，并运用此优化方法，进行了DH106动力箱的可靠性模糊优化设计。
Aiming at the inverse design of treatment planning for intensity modulated radiation therapy (IMRT), the multi-objective optimization model for IMRT was discussed.
针对适形调强放射治疗(IMRT)治疗计划逆向设计的需要，建立了IMRT治疗计划的多目标优化模型。
The analytic model of business process assignment optimization is presented to undertake the trade-off among resource, time, cost constraints and decision nodes in multi-project environment.
建立了折衷考虑资源、时间和成本约束，以及决策节点的多项目环境下的经营过程配置优化解析模型。
Based on the working feature of flying shear mechanisms and considering the motion track, velocity and position Angle of connecting rod, a multi-objective optimization model is built.
根据飞剪剪切机构的工作特点，综合考虑连杆运动轨迹、速度和位置角，建立多目标优化模型。
In order to improve the efficiency of evolutionary algorithm and reduce the optimization time, a multi-objective model management framework was proposed.
为了提高演化算法的效率，减少优化时间，提出一种多目标模型管理框架。
A new multi - objective fuzzy optimization model for daily active power dispatch is proposed.
提出了一个综合多个目标的日有功负荷分配集中优化模型。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
Based on the principle of optimum design, an optimization mathematical model of forging multi-pieces for saving material has been advanced.
本文根据最优化设计原理，推导并建立了大锻件多件拼锻节材的最优化数学模型。
This paper proposes a new mathematical model and an algorithm for multi-objective optimization of the overall parameters of the most widespread powered support -shield.
本文提出了支撑掩护式液压支架总体参数多目标优化设计的一个新的数学模型和算法。
An optimization method for reasoning results is presented, such as recursive grey fitting model for single sequence and attribute correlativity model for multi-dimension data.
分别在单序列时建立递进灰拟合模型，在多维数据集时利用属性相关性，对插值结果进行学习优化。
The Chaotic neural network model can be used to solve many multi-dimensioned, discrete, non-convex, nonlinear constrained optimization problems.
基于混沌神经网络模型可以有效地解决高维、离散、非凸的非线性约束优化问题。
Based on multi-parameter, multi-objective and multi-constraint of helical gear reducer, the optimization mathematical model was established.
针对斜齿轮减速器优化设计的多参数、多目标、多约束特点，建立了多目标优化数学模型；
The reliability sensitivity is added to the reliability-based optimization design model and the reliability-based robust design is summed up as a problem of multi-objection optimization.
把可靠性灵敏度融入可靠性优化设计模型之中，将可靠性稳健设计归结为满足可靠性要求的多目标优化问题。
In the paper the combined capaeity of CTC was defined and a fuzzy optimization model of the multi-objective decision-making for the CTC combined capacity was proposed.
首先提出了综合运输通道组合运能的定义及综合运输通道组合运能多目标决策模糊优化模型。
Based on the basic concept of the un-deformed pretension of cable, the optimization model of finished state with multi-objective and multi-constraint is used.
基于不变形预张力的基本概念，建立了斜拉桥成桥状态的多目标、多约束的优化模型，并通过有限元程序求解成桥索力。
By considering both material relevancy and requirement frequency, an optimization model for the storage location assignment in the multi-aisle warehouse was established.
根据物料相关性及需求频率，建立了多巷道仓库中货位分配的优化数学模型。
The separation among populations and the adaptive-gathering in a population are achieved by local evolution, so the multi-model function optimization is transformed to unimodal function optimization.
以局部演化的方式，实现了种群间分离与种群内自聚集，使多峰函数优化问题转化为单峰函数优化问题。
Meanwhile, based upon fuzzy preference, a multi-objective optimization model was established, by which the decision maker can decide the weights of different objectives.
同时基于模糊偏好关系来确定各指标的权重，由此建立多目标优化模型。
Meanwhile, based upon fuzzy preference, a multi-objective optimization model was established, by which the decision maker can decide the weights of different objectives.
同时基于模糊偏好关系来确定各指标的权重，由此建立多目标优化模型。
应用推荐