Vehicle suspensions system is a typical complex multi-body dynamics system.
汽车悬架系统是一种典型的复杂多体动力学系统。
Based on the theory of Multi-body Dynamics, we adopt ADAMS simulation platform and establish virtual prototype of breech mechanism.
基于多体力学理论，采用ADAMS软件平台建立了炮闩系统的虚拟样机。
PC-based CAX integrated analysis environment is first established using the flexible multi-body dynamics and virtual prototyping technology.
基于柔性多体动力学理论，借助虚拟样机技术，在微机平台上搭建了计算机辅助集成技术（CAX）辅助集成分析环境。
The structural and motion characteristics of the kangaroo are studied, and the analyzing methods for robot multi-body dynamics are discussed.
并分析了袋鼠生物体的结构和运动特点，研究了有关机器人多刚体动力学的分析方法。
The 4 joints universal human body inverse kinematics model and inverse dynamics model in weightlessness utilizing computational multi-body dynamics were proposed.
给出了应用计算多刚体系统动力学建立的通用失重人体4关节反向运动学与反向动力学模型。
In short the article gives a systemic basic researching idea of fatigue characteristics of the bus body structure based on multi-body dynamics and finite element.
总之，文章比较系统的阐述了基于多体动力学和有限元分析研究客车车身骨架结构疲劳特性的基本思路。
A novel dynamic model of molded case circuit breaker operating mechanisms was built based on multi-body dynamics principle adopting virtual prototyping technology.
采用基于多体动力学原理的虚拟样机技术，建立了塑料外壳式断路器操作机构的动力学模型。
Finite element method and flexible multi-body dynamics method are used to establish engine simulation model, calculate engine vibration intensity and radiated noise.
结合有限元和柔性多体动力学方法建立了该柴油机整机仿真模型，进行整机振动烈度和辐射噪声的模拟研究。
The dynamics model of the special molten iron tank car was established by using multi-body dynamics software package SIMPACK, and the curving performance was analyzed.
利用SIMPACK动力学仿真软件建立了特种铁水罐车的动力学模型，对其曲线通过性能进行了分析计算。
The feasibility of applying multi-body dynamics theory and co-simulation technology to semi-active suspension system of tracked vehicle is proved by simulation results.
从而验证了多体理论和联合仿真技术在履带车辆半主动悬挂技术的可行性。
The virtual prototype model of indexing cam-roller chain drive system of die-cutting machine is constructed in the computer environment based on multi-body dynamics theory.
应用多体动力学理论，建立了包含分度凸轮-链系统的模切机步进系统虚拟样机模型。
The model of ACB mechanisms for dynamic simulation was built with multi-body dynamics simulation program ADAMS, and the dynamic characteristics were obtained by simulation analysis.
利用多体动力学仿真分析软件ADAMS，对断路器机构系统进行动态仿真建模与分析，获得其分闸过程的动态特性。
The stiffening effects of the rotating blade are discussed, using the multi-body dynamics method. The influence of the dynamic stiffening effect on the blade vibration mode is then analyzed.
应用多体动力学方法，分析了旋转叶片动力刚化效应产生的原因及其对叶片振动模态的影响；
Based on the theory of Flexible multi-body dynamics, the model of deploy-able antenna is established, and the dynamic response and analysis calculation to large space deployable antenna is done.
基于柔性多体动力学理论，对可展开天线进行了系统建模和动力响应计算及分析。
In order to provide new proof for accident reconstruction, the method of occupant kinematics reconstruction using the coupling of momentum-based method and multi-body dynamics method was studied.
为了向交通事故再现提供新的依据，研究了动量冲量法与多体动力学法结合的乘员运动仿真，提出了两类算法的耦合方法。
With the great improvement of the computer technique and the maturation of the multi-body dynamics, the multi-DOF of the automobile model was presented and the simulation results were more accurate.
随着计算机技术的长足进步，以及多体系统动力学这一学科的成熟，汽车模型的自由度越来越多，仿真结果越来越精确。
This paper deals with the driving process of chain sprocket system with the multi rigid body dynamics method.
采用多刚体方法对链条链轮系统的驱动过程进行了建模和动力学分析。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
Multi-body-dynamics theory about ADAMS software is discussed in detail, which may be helpful to somebody interesting in developing our VP software owned knowledge patent.
详细叙述了ADAMS软件的多体动力学分析原理，对希望从底层开发自主知识产权虚拟样机仿真软件的人员有一定的参考价值。
Based on flexible multi-body system dynamics theory, kinematic and dynamics equations of deployable space cable-pole structure are derived.
基于柔性多体系统动力学理论，推导了可展空间索杆结构的运动学与动力学方程。
This paper is concerned with the dynamics and control for planar, large Angle rapid slew maneuvering of a flexible multi body spacecraft, consisting of a rigid central body and a flexible beam.
研究一类构形为中心刚性带挠性梁的航天器平面快速大角度机动的动力学与控制问题。
In this thesis, based on the dynamics of flexible multi-body systems, the analysis of dynamical systems of cable-strut and beam steel structure and the corresponding simulation research is addressed.
本文基于柔性多体系统动力学对索杆梁钢结构施工动力学的理论进行了研究并研制了相应的仿真软件系统。
But there are only basic info of geometry, topology and partial kinematics in the CAD model in STEP. The description on feature of multi-rigid-body dynamics is hardly blank.
使用现有的产品数据表达与交换标准STEP只能描述CAD模型几何、拓扑和部分运动学信息，对多刚体动力学特征的描述一直是特征模型中的一个空白。
Then, the virtual prototype of crawler running device is established based on multi-body system dynamics theory. The most complex part is to exert contact force in the model building process.
接着，以多体系统动力学理论为基础，建立了连续采煤机履带行走装置的虚拟样机模型，在建立模型过程中，最为复杂的可谓施加接触力。
The paper used the R-W method of multi-body system dynamics for the kinematical analysis of vehicle suspensions with closed loop system.
本文将多刚体系统动力学的R-W方法应用于具有闭合链系统的汽车悬架运动分析。
Based on multibody system dynamics method and ADAMS software platform, a rigid-flexible coupling multi-body model is built for vehicle dynamics simulation.
利用多体动力学方法建立了基于ADAMS软件平台的整车刚柔耦合多体系统操纵动力学仿真分析模型。
Modern theories of multi-body system dynamics are used to build the dynamic models with clearance of large equipment erecting system driven by two oil cylinders side-by-side.
运用现代多体系统动力学理论，针对双液压缸并列驱动的大型装置起竖系统，建立了含间隙起竖多刚体系统的动力学模型。
A dynamics modeling and analysis for Sight-stabilizing action system is made based on the multi-rigid body system theory and Lagranges equations.
本文应用多刚体系统理论和拉格朗日方程建立了稳瞄操纵机构的动力学数学模型。
Based on the theory of "Multi-body System Dynamics" , this paper uses software to setup a virtual prototype for a "Personal Defense Weapon" (PDW).
本文基于多体系统动力学理论，利用机械系统动力学分析软件建立了某单兵自卫武器的虚拟样机模型。
Based on the theory of "Multi-body System Dynamics" , this paper uses software to setup a virtual prototype for a "Personal Defense Weapon" (PDW).
本文基于多体系统动力学理论，利用机械系统动力学分析软件建立了某单兵自卫武器的虚拟样机模型。
应用推荐