About 80% of human infections are asymptomatic; the remaining cases have severe multi-system disease, where the virus affects several organs in the body, such as the liver, spleen and kidneys.
80%左右的人类感染为无症状；其余病例为严重的多系统疾病，病毒侵袭身体的若干器官，如肝、脾和肾。
This paper deals with the driving process of chain sprocket system with the multi rigid body dynamics method.
采用多刚体方法对链条链轮系统的驱动过程进行了建模和动力学分析。
Vehicle suspensions system is a typical complex multi-body dynamics system.
汽车悬架系统是一种典型的复杂多体动力学系统。
A lower body array approach for describing multi - body system is introduced and applied to an impact compactor.
介绍了一般多体系统的低序体阵列的描述方法并具体应用到冲击式压实机。
A dynamic model for a kind of spacial multi-body vibration system with elastic coupling was built.
对一类具有弹性连接的空间多刚体振动系统建立动力学模型。
The contact phenomenon in flexible multi-body system is common in engineering, which always make great effects to system design and analysis.
柔性多体系统的接触碰撞是工程中常见的现象，往往会对系统的设计与分析造成重大的影响。
The recognition system is implemented as an agent in the multi-perception machine and it is used as part of the video input for understanding the human body languages.
该系统作为一个智能体应用到多功能感知机中，作为视频通道输入的一部分来理解人类的体势语言信息。
A simple and flexible method for MAPLE programming is introduced to generate symbolic or numeric motion's equations in a multi rigid body system.
针对多体系统符号或数值形式运动方程的推导，给出了一种简单灵活的MAPLE程序设计方法。
Autonomous underwater vehicle (AUV) is a multi-body system composed of a load and a carrier.
自主式水下航行器是由载荷和运载体组成的一个多体系统。
The dynamic simulation model based on the multi-rigid-body theory of the passenger restraint system for side impact of a car is created, and its validity is verified by tests.
针对某轿车建立了基于多刚体理论的侧面碰撞乘员约束系统动态仿真模型，并依据试验结果进行了模型的有效性验证。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
Based on flexible multi-body system dynamics theory, kinematic and dynamics equations of deployable space cable-pole structure are derived.
基于柔性多体系统动力学理论，推导了可展空间索杆结构的运动学与动力学方程。
Modern theories of multi-body system dynamics are used to build the dynamic models with clearance of large equipment erecting system driven by two oil cylinders side-by-side.
运用现代多体系统动力学理论，针对双液压缸并列驱动的大型装置起竖系统，建立了含间隙起竖多刚体系统的动力学模型。
R -w is a new general method suitable to the modeling of multi -body system, having the advantages of accurate derivation, good in common use, and ease of solving on computer.
方法是一种适用于建立多刚体系统模型的普遍性方法，具有推导准确、通用性好、推导出的模型便于用计算机求解等优点。
Based on the theory of "Multi-body System Dynamics" , this paper uses software to setup a virtual prototype for a "Personal Defense Weapon" (PDW).
本文基于多体系统动力学理论，利用机械系统动力学分析软件建立了某单兵自卫武器的虚拟样机模型。
Based on multibody system dynamics method and ADAMS software platform, a rigid-flexible coupling multi-body model is built for vehicle dynamics simulation.
利用多体动力学方法建立了基于ADAMS软件平台的整车刚柔耦合多体系统操纵动力学仿真分析模型。
The shearer's ranging arm is a multi-body system and the load characteristic is very complicated, so it brings many difficulties to research dynamic property with traditional computational method.
采煤机截割部是一个复杂的多体系统，其负载特性非常复杂，采用传统的计算方法研究其动态特性非常困难。
A dynamics modeling and analysis for Sight-stabilizing action system is made based on the multi-rigid body system theory and Lagranges equations.
本文应用多刚体系统理论和拉格朗日方程建立了稳瞄操纵机构的动力学数学模型。
Based on the application of ADAMS in the analysis of multi-rigid (deformable) -body system, ADAMS is applied to parameterized design and simulation of a planar parallel manipulator 3-rrr.
基于ADAMS软件在多刚(柔)体系统分析中的应用，将ADAMS软件应用于平面3 -RRR并联机器人的参数化设计与仿真。
The dynamical model of multi-body restriction of human body system was studied in this paper.
本文围绕人体系统多体约束开展了动力学模型研究。
The paper used the R-W method of multi-body system dynamics for the kinematical analysis of vehicle suspensions with closed loop system.
本文将多刚体系统动力学的R-W方法应用于具有闭合链系统的汽车悬架运动分析。
The topological structure of multi-body system and their lower numbered body array, the composing methods of characteristic matrixes are explained.
阐述了多体系统的拓扑结构、低序体阵列和特征矩阵的构建方法。
At present, the modeling methods of multi-rigid-body system can be concluded to two kinds: Absolute coordinate method and relative coordinate method.
目前，多刚体系统的建模方法可归纳为绝对坐标法和相对坐标法两类。
The movement of multi-rigid-body system interconnected by smooth hinge moving in space and plane are deeply studied with the discrete time transfer matrix method of multibody system.
深入探讨多体系统离散时间传递矩阵法对平面、间刚体光滑铰多体系统运动响应的研究。
The feasibility of applying multi-body dynamics theory and co-simulation technology to semi-active suspension system of tracked vehicle is proved by simulation results.
从而验证了多体理论和联合仿真技术在履带车辆半主动悬挂技术的可行性。
May circle the system in the vacuum tubular resistance furnace body installment by the multi-layered copper pipe the horizontal field winding, must let water through cooling.
可在真空管式电阻炉体安装由多层铜管绕制的横磁线圈，需通水冷却。
The blade of a large horizontal axis wind turbine is a nonlinear periodic multi-body system with fluid-rigid-flexible coupling.
大型水平轴风力发电机桨叶为流-刚-柔耦合的周期时变多体系统。
Then, the virtual prototype of crawler running device is established based on multi-body system dynamics theory. The most complex part is to exert contact force in the model building process.
接着，以多体系统动力学理论为基础，建立了连续采煤机履带行走装置的虚拟样机模型，在建立模型过程中，最为复杂的可谓施加接触力。
The multi-rigid-body discrete element method was proposed for the analysis of deep-ocean mining pipe system.
采用多刚体离散元方法对长管线系统进行计算分析。
This paper deals with the driving process of chain-sprocket system with the multi rigid body dynamics method. With the model, the process of the dynamical response is analyzed.
介绍采用多刚体方法对链条传动系统的驱动过程进行建模和动力学分析。
应用推荐