In this paper, the structure and principle of PMAC open movement controller was introduced.
介绍了开放式运动控制器PMAC的结构及原理。
In this paper, the structure and principle of PMAC open movement controller were introduced.
介绍了开放式运动控制器PMAC的结构及原理。
Experiment indicates that this controller could satisfy the requirement of multi-axle motor-servo movement controller.
试验表明，该控制器能够满足多轴电机伺服运动控制的需要。
Methods the first molar was welded with a molar root movement controller, which extending backward and clinging to the edge of second molar dental cervix.
方法在第一磨牙带环上焊接一控根移动杆，其杆向后延伸紧贴第二磨牙牙冠颈缘上。
Finally, using the PMAC as the movement controller of the servo system, experimentation validates the position servo system controller designed in this thesis.
最后，采用PMAC卡作为系统的运动控制器，对本文所设计的位置控制器进行实验验证。
General movement controller, which is based on the open and embedded structure of Internet, is gradually becoming one of the main products in automatic control field.
基于网络的开放式结构和嵌入式结构的通用运动控制器逐步成为自动化控制领域里的主导产品之一。
The paper described the collectivity function characteristic and several important components of movement controller, for example main control program, interpolation module and velocity control.
这里论述了运动控制器的总体功能特性，并分别介绍了运动控制器的几个重要组成部分，如主控程序、插补模块及速度控制等。
Use of PC software and hardware, DSP calculation and controlling , FPGA super - flexible logical processing is made to help design the movement controller with perfect function and good quality.
充分利用PC机软硬件资源、DSP快速运算和控制功能、FPGA超强灵活的逻辑处理能力，便于设计出功能完美、性能优越的运动控制器。
Conclusion The molar root movement controller could prevent the side effects and avoid the second molar buccally positioned movement in the process of molar propeller moving the two molars distally.
结论磨牙控根移动杆具有良好防止磨牙推进器推两个磨牙远移过程中的不利副移动作用，并能避免第二磨牙颊向错位。
The force-feedback or haptic controller is a pistol-grip design with a trigger to activate movement and a thumb-controlled side button to open or close the gripper.
该力反馈与触觉控制器使用了手枪握把的设计，并带有一个触发器用来启动动作以及一个由拇指控制的侧方按钮用来控制机械手爪的开闭。
I ran into a problem with this because shooting and pump faking are tied to the same controller movement.
我遇到一个问题，投篮和假动作上篮都是一个操作。
We could obtain dictates in the steady-state visual evoked potential (SSVEP) and can control the spatial movement of the artificial limb through a programmable logic controller (PLC).
通过基于稳态视觉诱发电位构造的脑-机接口获取控制指令，通过可编程逻辑控制器(PLC)控制机械手完成规划的动作。
This controller uses in producing each floor the call to request the information and demonstrating elevator current movement situation.
该控制器用于给出每一楼层的呼叫请求信息，并显示电梯当前运行情况。
Inverse dynamics fuzzy rules model is the mathematical model about object movement disciplinarian which can be used for fuzzy controller design directly.
系统逆动力学模糊规则模型，是一类可以直接用于模糊控制器设计的关于对象运动规律的数学模型。
After state preestimate and state movement analysis, a discrete sliding mode controller which can essentially avoid the chattering phenomenon is designed.
通过系统状态预估及对状态运动的分析，设计了可以完全消除系统抖振的滑模控制器。
Experimental results show that the neural PID controller can efficiently track the movement of the joint and it is an appropriate controller for this kind of joint.
试验结果表明应用神经pid控制器能够有效地跟踪关节的运动轨迹，是适合这种关节的控制器。
Using movement & pressure controller based on DSP to make high-speed disposal on the data collected by the coder and the sensor, the real control on the die-casting machine was realized.
利用基于DSP的运动、压力控制器对编码器和传感器采集的数据进行高速处理，实现了对压铸机的实时控制。
This paper presents a method about electrode movement control rule inserted in current-constant spot-weld controller.
提出了一种在恒流点焊控制器基础上加入电极热膨胀位移控制规则的方法。
Finally, the movement of tracking and aiming was analyzed, and according to actual system parameter, emulated and analyzed dynamic model with MATLAB based on the PID controller.
最后，分析了系统跟瞄的特性，并根据实际参数，运用Matlab对其运动过程进行了基于PID控制器的数值仿真及分析。
The memories space for storing softwares and calculated results is also less This controller can be used in the movement control of planar or spatial mechanism with multifreedom.
该控制器使用了较少的硬件，软件及运用算结果所占用的存储空间也较小。 可用于多自由度平面机构和空间机构的运动控制。
Aiming at the pitching movement model, a nonlinear variable structure controller with an optimal sliding surface for the pitching control system of missile was presented.
针对俯仰运动模型，提出利用非线性最优滑模控制来设计某型导弹的俯仰运动控制系统。
The system also includes a controller for controlling the first and second flow regulators in response to a measurement taken by the flow detector of fluid movement in the fluid passageway.
连于所述流体通道且被配置成保持所述流体通道内流体运动的流量值大于所述未受限流量值的第一流量调节器；
The parameterization model was combined with a PID controller to control the yaw movement.
以参数化控制策略模型和PID控制律为基础，可规划控制指令轨迹并设计航向控制器。
The parameterization model was combined with a PID controller to control the yaw movement.
以参数化控制策略模型和PID控制律为基础，可规划控制指令轨迹并设计航向控制器。
应用推荐