The only profitable way to recycle a motor armature into its constituent parts is to "break it" manually; in the US, with its expensive labor, that's just not possible as a business proposition.
拆分汽车衔铁循环利用唯一的获利方法就是用人工拆分；在美国，由于劳动力昂贵，干人工拆分这一行不可能。
There are position sensor windings in addition to armature windings in the motor.
这种电机内部除了电枢绕组以外，还带有位置传感线圈。
In DC motor, the locality of axis of armature MMF was determined by the brush position, here the brush possessed a function of clamping.
直流电动机中电枢磁动势的轴线位置是由电刷位置决定的，电刷具有箝位的功能。
Depending on the switch position and the direction of current to the armature, the appropriate motor will either revolve clock-wise of counterclockwise to produce the desired seat movement.
根据开关的位置与流入电枢时电流的方向，电动机开始顺时针或逆时针旋转从而使座椅根据需要进行调整。
Faults in aero starter generator by analyzing the spectrum of motor armature current could be effectively detected and diagnosed.
对航空直流起动发电机的电枢电流波形进行频谱分析可有效地对电机的故障进行检测和诊断。
This so-called "armature reaction" is kept small by careful motor design.
在经周密设计的电机中，这种电枢反应可以很小。
A linear permanent magnet brushless DC motor (LPMBDCM) composed of an armature and a permanent magnet stator was introduced.
介绍了一种由电枢和永磁体构成的永磁直线直流无刷电动机。
The motor housing encloses the armature and pole pieces, holds the bearings that support the armature shaft, and provides the terminals for connecting the motor to the rest of the staring system.
启动机外壳内装入电枢与磁极，外壳两端的轴承支撑电枢转轴，并将启动机与启动系统支架相连。
Factors influencing noise of the motor systems such as cogging torque, HALL signal errors and armature magnetic field are analyzed.
本文分析了影响永磁同步电机噪声的因素，如定位力矩，霍尔信号的误差以及电枢反应磁场等。
In general, tachometer generators are eliminated in the small and medium power DC rotating speed governing systems, and armature voltage is used as motor speed signal.
在中小型直流调速系统中，一般都取消了测速发电机，而以电枢电压作为电机转速信号。
The rotor of the motor consisted of permanent part and electrical magnetic part, the two parts had the same axis direction and share one armature.
该电动机的转子由永磁体和辅助电励磁两部分组成，同轴安装，共用一个电枢绕组。
The brushless DC motor has excellent characteristics of good start and timing performance, but it is a nonlinear system owing to commutation process and armature reaction.
虽然无刷直流电机具有良好的启动和调速性能，但是由于换相以及电枢反应等因素，它属于非线性系统。
Usage: suitable for auto starting motor armature commutator pressing in and pressing into commutator welding slot after wire winding.
用途：适用于汽车起动电机电枢换向器压入及绕组后压入换向器焊接槽。
Usage: special equipment for auto starting motor armature flat wire coil automatic wire loading, automatic wire feeding, automatic alignment, automatic cutting off and automatic shape making.
用途：适用于汽车起动电机电枢扁线绕组的自动放线、自动送线、自动校直、自动切断、自动成形的一种专用设备。
Usage: special equipment for auto starting motor armature round coil automatic wire loading, automatic wire feeding, automatic alignment, automatic cutting off and automatic shape making.
用途：适用于汽车起动电机电枢圆线绕组的自动送料、自动去漆皮、自动定长切断、自动成形的一种专用设备。
Years in the motor current is outside the power supply from the induced electromotive force and the direction of armature current I in opposite directions.
在电动机里电流是由外电源供给的感生电动势的方向和电枢电流i方向相反。
Two PI adjusters were applied for wire feeding velocity control, one performed motor armature voltage feedback, the other one executed arc voltage feedback to determine the given velocity.
送丝速度通过两个PI调节器进行双闭环控制，分别进行电枢电压反馈和电弧电压反馈。
Two PI adjustors were applied for wire feeding velocity control, one performed motor armature voltage feedback, the other one executed arc voltage feedback to determine the given velocity.
送丝速度通过两个PI调节器进行双闭环控制，分别进行电枢电压反馈和电弧电压反馈。
Aimed at the feature that the locality of axis of the armature MMF is determined by the brush in dc motor, a new concept on clamp is proposed.
直流电动机中电枢磁动势的轴线位置是由电刷位置决定的，电刷具有箝位的功能。
Usage: suitable for auto starting motor commutator with big wire diameter and armature coil etc. wire spot welding.
用途：用途：适用汽车起动电机较大线径的换向器与电枢绕组等线的点焊。
The armature-reaction in a sensorless brushless DC(SLBLDC) motor causes detection error of rotor position and consequently leads to advanced or lagged commutation.
无刷直流电机电枢反应造成反电势法无传感器控制中的转子位置检测误差。
Aimed at the feature that the locality of axis of the armature MMF is determined by the brush in dc motor, a new concept on clamp is proposed.
针对直流电动机中电枢磁动势的轴线位置由电刷决定的特征，提出了箝位概念，指出自控变频乃是箝位效应的直接后果。
When motor running in blocked torque , the armature current is called peak torque current.
与峰值堵转转矩相应的电枢电流称为峰值堵转电流。
The paper introduces the armature winding processing for ZD108A traction motor and can be referred by same kinds of armature winding processing.
介绍了ZD 1 0 8a直流牵引电动机电枢线圈的加工过程，可供同类型电枢线圈的加工制作时参考。
This paper deals with the phasor diagram, the phasor analysis and the nature ofd-axis armature reactions of the steady-state running for single-phase PM synchronous motor.
研究了稀土永磁单相同步电动机的稳态运行时的相量图，对相量计算结果进行了分析，讨论了电机直轴电枢反应的性质问题。
Double salient pole pulsed DC motor consists of a salient pole stator with DC winding and a salient pole rotor without armature winding.
本发明公开了一种双凸极脉冲式直流电动机，该机由设置着直流绕组的凸极式定子和无电枢绕组的凸极式转子组成。
Three typical programs are given, They can be used to compute and draw the armature winding ofd-c motor, the torque speed characteristics and the starting transients of the motor are given.
列举了三个较为典型的解题及绘图程序、即直流电机电枢绕组的机械特性、起动过渡过程的计算与绘制。对每个程序要解决的教学问题及编程的特点作了扼要叙述。
The output power mechanism of a separately excited DC motor can be equivalent to a variable resistance, which is parallel with the armature winding of the motor.
若将他励直流电动机输出功率的机理等效为一个与电动机电枢绕组并联的可变电阻，可以得到他励直流电动机可变电阻型等效电路图。
This paper analyzes the armature reaction of the brushless DC servo motor by means of finite element method (FEM), and points out that the armature reaction has great influence on torque ripple.
采用数值计算方法对无刷直流电机的电枢反应作了分析，指出了电枢反应对力矩波动的影响。
This model permits the design of the current and speed control loops to adopt the same principles as the dynamic design of armature DC motor drives.
这种模型可以采用和直流电动机动态设计同样的原理进行电流环及速度环的设计。
应用推荐