The system is composed of industrial PC, DMC300 motion controller, discharge status checking card, A/D card, I/O card and pulse power.
该系统由工业PC，DMC300运动控制器，放电状态检查卡，A/D 卡，I/O 卡和脉冲电源组成。
Open Motion Controller is the core of NC System.
开放式运动控制器是数控系统的核心。
Motion controller is the core of opening motion control system.
运动控制器是开放式运动控制系统的核心。
The core of the motion system is 3 -axis-servo-motion controller.
在这个运动控制的核心就是一块3轴伺服运动控制卡。
Delta motion controller 20pm has been widely used in rubber industry.
台达运动控制器20pm已经在点胶行业广泛应用。
A motion controller with DSP for military operation robot is introduced in this pa-per.
介绍了一种由数字信号处理器构成的军用操作机器人运动控制器。
The application principle of the motion controller in X, Y numerical servo platform was discussed.
阐述了该运动控制器在X、Y两轴数控伺服工作台中的应用原理。
Then, the software design of the embedded motion controller which based on the PC/104 bus is analyzed.
再次，论文分析了基于PC/104的嵌入式运动控制系统的软件设计。
The fast expanding market of motion controller with open architecture gives us new challenge and opportunity.
开放式运动控制器市场的迅速扩大，给我们带来了新的机遇和挑战。
Motion controller is the equipment that control the motor driven machine to implement the expectant motion locus.
运动控制器是通过对由电机驱动的执行机构等设备进行运动控制，以实现预定运动轨迹目标的装置。
The DC servo motors are controlled with motion controller LM629 and motor drive chip LMD18200 based on PC104 bus.
在PC 104总线控制下，应用运动控制芯片LM 629和电动机驱动芯片LMD18200实现了直流伺服电动机的控制。
The system USES programmable multi-axis controller (PMAC) as servo motion controller. It is flexible and reliable.
系统使用可编程多轴控制器(PMAC)作为伺服运动控制器，具有很强的灵活性和可靠性。
The motion ability of autonomic mobile robot is determined by its body structure and its motion controller system.
移动机器人车体结构和运动控制系统决定了它的运动能力。
A design is described in the paper that step motor motion controller is a down location control unit based on DSP kernel.
本文提出了一套基于DSP内核的运动控制器的设计方案。
Implementation of algorism of complex control is one of the hot research for technique of motion controller implementation.
复杂控制算法实现，是目前运动控制器实现技术研究的一个热点。
The combination of touch-screen and motion controller is used to develop the control system of the three servo manipulator.
采用触摸屏与运动控制器相结合的方式，开发出三伺服机械手的控制系统。
Some enable technologies, such as virtual design system, virtual device system and virtual motion controller, are discussed.
讨论相应的一些支撑技术即虚拟设计系统、虚拟仪器系统和虚拟运动控制器。
Programmable multi axis motion controller, stability and operation to achieve the leading technical level at home and abroad.
可编程的多轴运动控制器，稳定性和操作性达到国内外领先技术水平。
A motion controller interchangeable for servo motor and step motor constructed by motion control chip PCL240AS is introduced.
提出一种用运动控制芯片PCL240AS构造的伺服电动机和步进电动机通用的运动控制器。
A novel high accuracy robust motion controller is designed aiming at the factors that affect the performance of motion control.
针对影响运动控制性能的因素，设计了一种新型的高精度鲁棒运动控制器。
SAN FRANCISCO — Sony’s motion controller is called PlayStation Move and will be released this fall, the gamemaker said Wednesday.
旧金山——游戏制造商索尼于本周三公布，其新款动作感应控制器命名为 PlayStation Move，将在今年秋季发布。
Sony dedicated a large chunk of their E3 press conference to their new motion controller, but many questions remain to be answered.
索尼极大地致力于在E3新闻现场发布会发布的新的动作控制器，不过许多问题依旧被提问。
The computer control system of this instrument adopts GT-400-SG four axes motion controller to control the motion of axis x, y, and Z.
本自动书写仪计算机控制系统采用了GT 400SG四轴运动控制器来控制X轴、Y轴以及Z轴的运动。
Using a homemade motion controller marketed as MCT8000 series, a universal robot controller with open architecture has been developed.
应用国产MCT8000运动控制卡开发了一种新型产业化的开放式结构机器人控制系统。
Microprocessor, dedicated motion controller and driver, optical electronic encoder were used to realize servo closed-loop motion control.
采用微处理器、专用的运动控制和驱动芯片以及光电编码器实现了机器人关节的伺服闭环运动控制；
Study the hardware design of the CNC system based on the open motion controller. Provide a whole solution of mechanism and electric design.
介绍研究基于开放式运动控制器的数控系统的硬件设计，提出一套完整数控系统的机械以及电气解决方案。
The DSP and CPLD based motion controller fully displays the fast data calculation ability of DSP and the hardware management ability of CPLD.
其中基于DSP和CPLD的运动控制器充分发挥了DSP快速数据运算能力和C PLD的硬件管理功能。
Chapter five: introduces the structure and functional module arranging of the motion controller, and gives the process and result of system test.
第五章主要介绍项目开发所得步进电机控制器的系统结构和功能模块配置，并给出系统测试内容和测试结果。
An open CNC system with two CPUs in parallel, in which the center is PMAC motion controller and the supporting element is industrial PC, is suggested.
提出了一种以PMAC运动控制器为控制系统核心、工业控制机为系统支撑单元的双cpu开放式数控系统。
An open CNC system with two CPUs in parallel, in which the center is PMAC motion controller and the supporting element is industrial PC, is suggested.
提出了一种以PMAC运动控制器为控制系统核心、工业控制机为系统支撑单元的双cpu开放式数控系统。
应用推荐