In my experience, the full-motion video from a USB CAM is blurry at best.
以我的经验，即使在最好的情况下，来自usb摄像机的运动视频也是模糊的。
To transfer the motion of the CAM upward to the valve, additional parts are needed.
为了将凸轮的运动传给气门需要一些附属装置。
Improve the work reliability and accuracy of the mechanism by optimizing the design of CAM mechanism's motion law.
通过对凸轮机构运动规律的优选设计，提高机构的工作可靠性和工作精度。
Cam design is based on the design of follower's motion laws.
从动件运动规律的设计是凸轮机构设计的基础。
The double simple harmonic motion of the tightening weft cams follower and the mathematical equations of the CAM were established.
推导出适合打纬共轭凸轮机构的双简谐运动规律和共轭凸轮廓线的坐标方程。
To analyze the cause of design error on Oscillating follower Cylinder Cam Mechanism, building the mathematics model, and affording the equation to conform to actual motion rule.
分析了摆动从动件圆柱凸轮机构误差产生原因，建立了数学模型，并给出其实际运动规律的方程。
With the help of complex number operation, the author has developed a method for designing the contour of a CAM whose follower keeps a general plane motion.
本文利用复数表示法，得出从动转子中心作平面一般运动情况下的凸轮廓线的设计方法。
Worm CAM graduation machanism is a new type of high speed intermittent motion machanism that has very short history.
蜗形凸轮分度机构是一种历史很短的新型高速间歇运动机构。
The operating principle of seaming mechanism of automatic paper cup machine was introduced and the motion law of the CAM mechanism was analyzed.
以机械机构的参数化设计为启示，论述了全自动纸杯成型机卷封机构的工作原理，分析了卷封凸轮机构的运动规律。
The mathematical model for the motion inverse seeking of paper separation mechanism was constructed, and the motion laws of CAM follower and of paper separation suction nozzle were obtained.
构建了分纸机构运动反求的数学模型，得到了从动件及分纸吸嘴的运动规律。
This paper introduces the motion of CAM hook needle of the linking machine, and describes the motion locus of.
介绍了合缝机三角钩针的组合运动，描述了三角钩针针尖运动的轨迹。
The active cam shedding mechanism is the key parts of looms, which determines the speed and steady state of motion.
积极式凸轮开口机构是控制织机运动的关键部件，决定织机运动的速度与平稳。
The paper researches designing method of the motion rule-divisible cam mechanism , makes a detailed analysis of the mathematical equation, and builds the mathematical model of the cam mechanism .
研究了运动规律分段式凸轮机构设计方法与流程，对凸轮机构运动的数学公式进行了详细的分析和推导，建立了凸轮机构。
CAM system based on industry computer and multi-task motion controller adopts the electrical gear to accomplish synchronous motion control of the winding machine.
基于工控机和多任务运动控制器的缠绕机CAM系统采用电子齿轮方式实现缠绕机同步运动控制。
The law of motion of follower is often described by the compound law of motion to get the better operational performance in modern CAM design.
在现代凸轮机构设计中，为获得良好的使用性能，从动件的运动规律常常采用复合运动规律。
The author developed a new type of CAM motion curve - density cycloid motion curve.
本文开发了一种新型的凸轮运动规律——疏密化摆线运动规律。
A new traverse gear is introduced with the slotted CAM instead of crank guide, meanwhile, a motion law is induced with a motion equation.
同时，针对沟槽凸轮特点，提出新的运动规律，推导了运动方程，并对三种运动规律进行了比较。
The paper researches designing method of the motion rule-divisible CAM mechanism, makes a detailed analysis of the mathematical equation, and builds the mathematical model of the CAM mechanism.
研究了运动规律分段式凸轮机构设计方法与流程，对凸轮机构运动的数学公式进行了详细的分析和推导，建立了凸轮机构的数学模型。
The CAM contour curves are reconstructed by NURBS, and a rapid reverse design method for spatial CAM follower motion specification via motion simulation is also studied.
利用NURBS实现了凸轮轮廓曲线的重构，并给出基于运动仿真实现迅速反求空间凸轮机构从动件运动规律的方法。
Using a single chip microcomputer to control a stepping motor as an example, the theoretical and experimental research about lots of motion laws of the driven CAM is implemented.
并以单片机控制步进电机为实例，进行了实现凸轮机构从动件多种运动规律的理论和实验研究。
Adopting the form closure error and the motion transmission error of sine curve to carrying out theoretical analysis of this CAM mechanism.
对该凸轮机构采用正弦曲线的形封闭误差和运动传递误差进行了理论分析。
Position, speed, torque, and phase control such as electronic gearing and electronic cam profiles are available for complex motion.
位置、速度、扭矩和相位控制，如电子传动装置和电子凸轮轮廓在复杂的运动中也可以获得。
The general formula of the motion specifications of a cam mechanism follower can satisfy the needs of different selection of motion specifications for the low, medium, or high speed cam mechanism.
从具有特殊要求从动件运动规律出发，推导出了凸轮机构从动件运动规律一般的通用表达式。
On the basis of a composing method of universal harmonic trapezoid motion laws, nondimensional general curve formulation of driven cam is built.
基于通用简谐梯形组合运动规律的构成方法，建立了凸轮机构从动件无因次通用曲线方程。
On the basis of the motion graph, the roller-gear-cam and driven roller in ATC are given a motion analyze.
介绍了自动换刀装置的换刀过程、滚子齿形凸轮机构的运动循环图设计，并进行了分析。
There is deviation between the theory motion of the CAM and the response of the harness frame. The derivation and the influence on weaving are discussed by experiment and calculation.
高速运行的凸轮开口机构的名义运动量与综框的运动响应方面存在偏差，通过实验和理论计算分析系统的运动偏差及其对织造的影响。
The paper presents a new method for synthesizing and optimizing the follower motion with complex characteristics for high-speed CAM mechanism based on the piecewise polynomials.
针对具有复杂运动特征的高速凸轮机构从动件运动规律，提出用分段多项式进行综合和优化的新方法。
The Motion law design directly influences the operation accuracy of the CAM mechanism.
运动规律的设计，直接影响凸轮机构的运行精度。
Summarize the characteristics of roller-gear-cam and structure in ATC. Introduce the tool change process of automatic tool change, draw the motion circle graph.
总结了滚子齿形凸轮的特点及其在自动换刀单元（ATC）中滚子齿形凸轮的结构形式。
Summarize the characteristics of roller-gear-cam and structure in ATC. Introduce the tool change process of automatic tool change, draw the motion circle graph.
总结了滚子齿形凸轮的特点及其在自动换刀单元（ATC）中滚子齿形凸轮的结构形式。
应用推荐