The proposed method is applied to changed measurement triggering mode (CNTM), by means of sensitivity analysis, at each triggering moment only the changed measured values are treated sequentially.
该方法用于变化量测触发方式，通过灵敏度分析的方法，在每一触发时刻仅对变化量测进行逐次处理。
In this paper, we analysis the defects of least variance method, and advance a least second moment method of the futures hedging.
在本文我们分析最小方差法存在的缺陷，提出了套期保值的最小二阶矩方法。
Theory analysis and calculation of the rectangular waveguide longitudinal slot arrays are made by using moment method.
利用矩量法对矩形波导宽边纵缝阵列天线进行了理论分析和计算。
Based on the moment estimation of limit state function for calculation of failure probability, a new reliability sensitivity analysis method is presented.
基于极限状态函数矩估计的失效概率计算，提出一种新的可靠性灵敏度分析方法。
For fuzzy reliability analysis with fuzzy failure state and fuzzy safety state, a moment method is proposed to calculate fuzzy failure probability.
针对失效状态和安全状态具有模糊性的模糊可靠性分析问题，提出了一种模糊失效概率计算的矩方法。
For general reliability analysis with fuzzy failure state and fuzzy safety state, moment method is proposed to calculate general failure probability.
针对失效状态和安全状态具有模糊性的广义可靠性分析问题，提出了一种广义失效概率计算的矩方法。
The moment method combined with theory of microwave network is used for the analysis of EMC problems of the vehicular multiple antennas system.
本文采用矩量法和微波网络理论相结合的方法分析了车载多天线系统的电磁兼容问题。
A large part of this paper is an analysis of the using of Method Of Moment in PCB wideband planar loaded antenna on the basis of a wideband antenna in PCB planar structure.
基于PCB平面结构宽带天线，通过推导满足天线边界条件的电流积分方程，利用矩量法对PCB宽带加载天线进行了计算分析，在对计算结果分析的基础上，初步制作了单极和双极PCB加载天线。
The negative moment of the beam can not be concluded by the method based on the half-space elastic foundation theory, but the negative moment is proved by the numerical analysis.
基于弹性半无限空间的幂级数法不能计算格构梁上的负弯矩区段，与数值分析的结果不符。
An accurate method for slope stability analysis is provided in this paper, with which the equilibrium of force and moment, and the yield conditions on the sliding plane will be reached.
本文对一般性边坡，给出了满足力与力矩平衡及滑动面上屈服条件的稳定性的精确分析方法。
On the basis of the popular moment analysis and the concept of laser beam quality factor, the method to analyze such effects is deduced statistically.
以激光束矩量分析理论及光束质量因子的概念为基础，运用数理统计手段，导出了分析随机误差对测量精度影响的具体方法。
The theory used in the analysis of the Yagiuda antenna of NEC which is based on method of moment(mom) and the simplex are briefly introduced in this paper.
介绍了基于矩量法的NEC分析八木天线的原理和单纯形法的基本原理，并将两者结合起来提出了一种适合工程中使用的优化设计方法。
Various E-plane strip discontinuities are analyzed by the moment method and generalized network analysis technique.
本文利用矩量法和一般的网络分析技术分析了各种E面膜片不连续性。
In this paper, the four-moment reliability analysis method for perfopmance function implicit structure is discussed.
本文探讨了功能函数不明确结构四阶矩可靠度的分析方法。
Considering radial load, axial load, centrifugal force and gyroscopic moment acted on the ball bearing simultaneously, an analysis model based on quasi-dynamic method was set up in this paper.
本文利用拟动力学法，同时考虑径向负荷、轴向负荷、自身离心力以及陀螺力矩作用的影响，建立了高速滚珠轴承载荷分布的分析模型。
The first-order second-moment method is fundamental in structural reliability analysis, its accuracy depends upon the nonlinear extent of performance functions around checking point.
一次二阶矩方法是结构可靠度分析的基本方法．一次二阶矩方法的计算精度依赖于验算点附近功能函数的非线性程度。
Analysis the movement of humanoid robot, come up with the kinematic and dynamic model and a method of force moment control.
分析拟人足球机器人的运动状态，建立起拟人足球机器人运动学和动力学模型。提出一种有效的力矩控制方法。
Trust force and bending moment result in heat expansion are calculated by adopting beam theory of mechanics of materials and applying force component analysis method.
采用材料力学的梁理论，应用力法分析方法，计算出热膨胀导致的推力和弯矩。
The quasi-moment method presented in this paper is based on the structural analysis of a multi-storied and single-span symmetrical frame.
本文以多层单跨对称框架的受力分析为例，提出了虚拟弯矩法。
Crankshaft dynamics analysis and real test show that this method can identify the ignition moment, with the accuracy improved from cycle level to Angle level.
理论分析和试验表明该方法不仅可以准确识别着火始点，而且识别精度也从循环级提高到角度级。
The linear fields of moment and displacement are used in the finite element analysis. The results of calculation show that the method proposed is simple and reliable.
在有限元分析中采用了线性的力矩场和挠度场，实际计算表明，本文使用的方法是简单、可靠的。
The proposed moment method is of high efficiency and accuracy, and is proved useful for the accurate modeling and efficient analysis of scattering from conducting wire structures the arbitrary shapes.
所提出的方法被证明是高效且准确的，对于任意形状的线结构的准确建模和散射体的有效分析也被证明是有用的。
The paper described a method of converter modeling, tilting moment analysis and dynamic simulation.
本文介绍了转炉倾动力矩计算的计算机模型、计算方法及转炉倾动的动态模拟。
The present usually reliability analysis method for engineering structures are Monte Carlo Simulate (MCS), First-order Second-moment method (FOSM) and reliability Surface method (RSM).
现有基本的结构可靠度计算方法可分为一次二阶矩法、蒙特卡罗法和响应面法。
The present usually reliability analysis method for engineering structures are Monte Carlo Simulate (MCS), First-order Second-moment method (FOSM) and reliability Surface method (RSM).
现有基本的结构可靠度计算方法可分为一次二阶矩法、蒙特卡罗法和响应面法。
应用推荐