The utility model can be manufactured by adopting the method of one-time forming in mold pasting and cold-molding compression.
该产品的制作可采用模具糊制、对模冷压一次成型的方法。
Like compression molding, this method is used to form thermoset materials and involves permanently curing the plastic in a mold under heat and pressure.
像压缩成型，使用这种方法，形成热固性材料和涉及永久固化塑料模具在高温下和压力。
External trough line and the tube are through a second compression molding, and the curing process is also made the appropriate adjustments.
外部槽线与管体经由二次模压成型，固化工艺也做了相应调整。
The Optimization objective function of the biomass Compression molding process had been made.
提出了一种生物质压缩成型过程的优化目标函数。
Compression molding distributes the EVA foam within the midsole to areas that need the most cushioning.
压缩注塑可以将中底内的EVA泡沫分布在需要最多缓冲的区域。
Thereby, the appropriate processing parameters for injection compression molding of optical disk have been obtained.
从而最终获得光盘基片注射压缩成型所需的合适的工艺参数值。
The machine has a stirring, mixing, compression molding a set of assembly line and production efficiency.
本机具有搅拌、混合、加压成型的一整套流水生产线，生产效率高。
To date, the materials have been tested successfully in injection molding, compression molding and blown film.
迄今为止，该材料已测试成功的注塑成型，压缩成型和吹塑薄膜。
压塑成型是什么?。
In the production process, rolling and compression molding are combined. And the straightness is also corrected repeatedly.
制作过程中，卷制和模压工艺相结合，并多次矫正直线度。
Compression molding is one of the oldest techniques for processing polymers.
模压成型是最古老的聚合物加工技术之一。
Unlike compression molding, however, transfer molding includes heating the plastic to a fluid state before it gets to the mold and forcing it into a closed mold using a hydraulically actuated plunger.
与压缩成型，但是，传递模塑包括取暖的塑料流体之前得到国家的模具，并迫使它变成一个封闭的模具采用液压驱动柱塞。
Using Imported Prepreg as the Raw Material, the Second Overall Compression Molding for External Trough Line and the Tube, Excellent Surface Finishment and Mechanical Performance.
采用进口预浸布作为原材料，槽线与管体二次固化整体成型，表面光洁度和力学性能优异。
Biomass pellet fuel production technology mainly has two ways, one is a hot compression extrusion molding technology, the other is a high pressure cavity forming technology.
生物质颗粒燃料的生产技术主要有两种方式，一种是热压缩挤压成型技术，另一种是高压模腔成型技术。
The densification molding pressure of hard brittle material is higher than that of plastic material because of the higher compression strength of hard brittle material.
由于瘠性料的抗压强度高于塑性料，从而导致瘠性料的成型压力高于塑性料。
If above problems can be overcome, the compression molding machines and forcing machines on the shelf in society can be recombined for reproduction.
若能联合研发解决以上难题，社会闲置的压塑机和压力机可采取多种结合方式进行生产。
Compression technology of biomass could be agriculture, forestry, solid waste compression molding, can be made into fuel instead of coal briquette.
生物质压缩技术可将固体农林废弃物压缩成型，制成可代替煤炭的压块燃料。
It is used widely in making injection and compression molds for rubber and plastic molding, molds for die-casting metals, and dies for forging and metal stamping.
它被广泛应用于制造用于橡胶和塑料成型的注射压缩模具、压铸轴承合金模型以及锻造和五金冲压的印模。
The molding effects of biomass molding machine with variable diameters at room temperature were analyzed and the compression ratio range at high quality molding was determined.
并使用小刨花、锯末等材料进行验证，探讨了对生物质常温变径成型机成型效果的影响因素，同时确定了较高成型质量时成型腔的压缩比范围。
This paper mainly introduces the compression molding equipment including compression press and compression molding mold. The processing parameters of compression molding were also briefed.
主要介绍模压成型的设备（包括模压机和模具），并简述模压成型的工艺参数。
New structure of compression molding mold was designed and manufactured, and the long term test was developed on the original cap making machine.
开展了新结构压塑成型模具的设计、制造工作，并在原制盖机上进行了长期试验。
Varying the dosage of fillings, coupling agent, peroxide, and the mixing techniques, the UHMWPE composites were molded by compression molding.
改变填料、偶联剂、过氧化物的用量及混合工艺对超高分子量聚乙烯复合材料实施模压成型。
Based on the slaking curve and thermo-gravimetric curve of calcium lime, the rational cold compression molding techniques of calcium carbide were given.
通过分析生石灰的消化曲线和热失重曲线，提出了合理的电石成型工艺。
The foamed materials were prepared by compression molding, and antistatic agent was applied to polyolefine.
在聚烯烃中添加抗静电剂，采用模压法制备了发泡材料。
The property and characteristic of blending vulcanization system for air curing and compression molding were compared.
比较了并用硫化方式在热空气和模压硫化的性能及特点。
The mould service life is raised one time above compared with the conventional compression molding mould.
且与传统的压塑成型模具相比寿命可提高1倍以上。
The characterteristic, molding process of injection-compression molding and the key points of mould design were described.
阐述了抑制塑料透镜变形所采用的注射-压缩成型技术的特点、成型过程及其模具设计的要点；
The paper pulp compression molding product had the very long history, very early is a paper product member.
纸浆模塑制品已有很久的历史，很早就是纸制品的一个分子。
The paper pulp compression molding product had the very long history, very early is a paper product member.
纸浆模塑制品已有很久的历史，很早就是纸制品的一个分子。
应用推荐