A subsequent agreement in reference to the "molded parts" will also be reviewed.
一个后续的关于“模具零件”的合同也会被谈到。
Such as packing and turnover for electronic components, automotive parts, injection molded parts.
电子产品、汽车零件、注塑件等包装及周转。
However, the error does affect the simulation for the precise or very thin injection-molded parts.
但对于精密注塑件,或者制件很薄,这种误差则会对数值分析产生影响。
By the end of this course, you'll be more knowledgeable about designing your own injection molded parts.
本课程结束时,你会更了解设计自己的注塑件。
We majors in manufacturing high precision molded parts, parts assembly and devise processing techniques.
我司主要从事高精密塑胶件的生产,组装及表面处理。
The various forms have a multitude of USES as coatings, packing films, molded parts, insulation, piping, etc.
不同形式的聚乙烯有许多用途,例如涂料、包装膜、模塑件、绝缘材料、管道等。
There are two kinds residual stress of injection molded parts, flow residual stress and thermal residual stress.
注塑件残余应力主要有流动残余应力和残余热应力,文中主要考虑注塑件的残余热应力。
Three-dimensional Network of Reinforcing Fibers in the Injection Molded Parts Gives Excellent Mechanical Properties.
玻纤在注塑制品中形成三维网络结构,提升力学性能。
G&F Industries specializes in manufacturing precision plastic injection molded parts, injection molds and assemblies.
是一家专业从事精密注模配件,注模制造及装配的企业。
The planar orientation of fibers may occur after the flow molding of GMT, which can result in anisotropy molded parts.
GMT材料流动成型后玻纤在平面内发生取向,导致模压件呈各向异性。
For larger molded parts, material typically represents more than 50% of the part cost for a refrigerator crisper tray.
对冰箱蔬果盘之类的大零件而言,材料往往占成本50%以上。
Core construction components (or inserts) may include wheel hubs, bearings, fasteners, injection-molded parts or castings.
滚轮产品的核心组成部分包括轮毂,轴承,紧固件或铸件。
Residual stress is one of important indexes of evaluating the quality of injection molded parts, especially for optical products.
残余应力是评价塑料制品品质的一个重要指标,尤其是对高附加值的光学制品。
Rapid, low-cost developed samples, including stamping, casting, injection molded parts, pieces of cold heading, Sheet Metal Parts.
快速,低成本试制样品,包括冲压件,铸件,注塑件,冷镦件,板金件。
Leafly Mould Co., Ltd. is a professional manufacturer of plastic injection molds, die cast molds, stamping molds, and their molded parts.
立夫莱有限公司是一家专业生产塑料注塑模具,压铸模具,五金冲压模具及其制品的生产型企业。
The article introduces the knit-lines formation, mechanical behavior and influencing factors for the thermoplastic injection molded parts.
介绍了热塑性塑料注射塑料件的熔合缝的形成及其力学特性和影响因素。
The finite model of injection molded parts with microstructure region considering latent heat can approximatively forecast the cavity temperature.
采用考虑结晶潜热的微结构件注射成型有限元模型能较准确地预测制品内部温度场分布。
Thus, composite texturing die can not only improve the quality of molded parts but also die life and drawing performance had improved accordingly.
因此,复合造型模具不仅能提高成型件的质量,而且模具的拉深性能和寿命也相应的得到提高。
Inject molding is an important way for plastic forming, and technological parameters have significant effects on the quality of injection molded parts.
注射成形是重要的塑料成形方式之一,工艺参数对塑件质量有重要影响。
Based on the variation of temperature in injection molded parts, the simulation of cooling takes consideration of the cooling stage of the part after ejection.
以注塑制品的温度变化为对象,考虑了注塑制品出模后的冷却过程。
The painting department is responsible for surface decoration of our molded parts. There are 4 paint lines to handle different UV, PU and high gloss applications.
油漆部门负责为模型配件进行表面装饰。我们有4个油漆工作线来满足不同的UVPU和高光泽的要求。
Using average shrinkage rates of injection-molded parts to decide the dimension of mold cavity can not satisfy the demand of high precision injection-molded parts.
采用一般的平均收缩率方法来确定模具型腔的成型尺寸,已难以满足精密注塑成型制品的精度要求。
Effects of different cooling rates and uneven mold temperature on the residual stress inside injection molded parts are studied with the help of numerical methods.
采用数值方法研究了不同冷却速率、不均匀模壁温度对塑件残余应力的影响。
Pressure thermoformed parts replace injection and structural foam molded parts in moderate volume (250 - 3000 annually) and provide a wide range of colors and textures.
热成型零件更换注射压力和结构发泡成型,成交量适中的(250- 3000年),并提供了广泛的颜色和纹理。
Industrial plastic parts are usually requested to have high precision and complicated shapes, so it is important to control the shrinkage rates of injection-molded parts.
在这些应用场合,不仅要求塑料制品的精度高,而且塑料制品形状也比较复杂,这使得对注塑成型制品收缩率的控制变得十分重要。
Plastics shrinkage causes the deformation of injection molded parts. The pressure gradient, temperature gradient and shear stress in the cavity make nonuniform shrinkage.
注塑件变形始于塑料的收缩,型腔中压力梯度、温度梯度以及剪切应力的客观存在导致了注塑件各部位收缩的不均一。
Most injection-molded parts are complicated thin-shell like structure, so the thin shell finite element method is usually used to analyze the warpage and deformation of the parts.
橡塑模具制品一般具有厚度方向尺寸较面内尺寸很小且形状复杂等特点,所以在对制品进行翘曲变形分析时,就可采用薄壳有限元法。
Would-be customers discovered it could be fashioned into molded insulation, valve parts, pipe stems, billiard balls, knobs, buttons, knife handles and all manners of items.
未来的客户发现它能够制造成铸模绝缘材料、阀门零件、细长的物品、台球、球形柄、纽扣、刀柄以及各种各样的物件。
Would-be customers discovered it could be fashioned into molded insulation, valve parts, pipe stems, billiard balls, knobs, buttons, knife handles and all manners of items.
未来的客户发现它能够制造成铸模绝缘材料、阀门零件、细长的物品、台球、球形柄、纽扣、刀柄以及各种各样的物件。
应用推荐