• The mold cavity was obtained by splitting mold base in parting surface.

    模具型腔可采用分割模板的方法获取

    www.dictall.com

  • Molten metal is poured into a mold cavity formed out of sand (natural or synthetic).

    将熔化金属倒入型砂(天然人造的)做成铸模

    www.17xuexi.org

  • Casting is a manufacturing process in which molten metal is poured or injected and allowed to solidify in a suitably shaped mold cavity.

    铸造一种将熔化金属倒入注入合适的铸模并且其中固化制造工艺

    www.17xuexi.org

  • The purpose of this is to feed the molten metal to the mold cavity as the molten metal solidifies and shrinks, and thereby prevents voids in the main casting.

    目的熔化金属凝固收缩时往型腔里补充熔化金属,从而防止铸件中产生孔隙

    www.mapeng.net

  • Gas assisted plastics injection molding process includes injection of polymer melt into mold cavity and then injection of gas-compressed into the polymer melt.

    气体辅助注塑成型工艺包含塑料熔体注射气体注射两部分,由气体推致力塑料熔体充满模具型腔

    www.chemyq.com

  • In order to ensure requirement of taper and size in machining complex mold cavity, it must depend on precision and reliable programming method of WEDM machine.

    使复杂型腔加工保证锥度尺寸要求必须以线切割机床精度可靠编程方法为前提。

    www.dictall.com

  • Using average shrinkage rates of injection-molded parts to decide the dimension of mold cavity can not satisfy the demand of high precision injection-molded parts.

    采用一般平均收缩率方法确定模具型腔成型尺寸,已难以满足精密注塑成型制品的精度要求

    dict.cnki.net

  • As the smallest cavity hot runner original distance constraints in the design of the line very close to the mold cavity, pay attention to check the nozzle distance.

    最小型腔限制。由于热流原件对最小型腔距离限制设计行腔距离模具时,要注意检查喷嘴距离。

    www.rld512.com

  • An example was demonstrated to illustrate the correctness and effectiveness of the numerical method as well as to analyze the factors influencing mold cavity temperature.

    最后通过实例分析影响型腔温度各种因素验证文中算法正确性有效性

    dict.cnki.net

  • This article presents a study of the technology of virtual mold-repair for the optimal design of the mold cavity of a hollow turbine blade to precisely control its shape.

    针对精铸空心涡轮叶片精确问题,开展模具型腔优化设计中的虚拟修模技术研究

    hkxb.buaa.edu.cn

  • Injection mould feed system is an important component of the structure design of injection mould, and is also the only channel for molten plastic flowing into mold cavity.

    浇注系统注塑模具结构设计中的一个重要组成部分也是塑料熔体进入模具型腔唯一通道

    www.fabiao.net

  • Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.

    以注塑模垫板设计例详细阐述传统力学分析对比,为注塑模具型腔设计提供了一种方法

    dict.cnki.net

  • An introduction was made to volumetric changes of castings and dimension changes of mold cavity occurring during liquid cooling and solidification of nodular iron castings.

    介绍球铁冷却凝固过程中的体积变化以及型腔尺寸变化。

    www.chemyq.com

  • The injection mold cavity made as mentioned has the advantages of high emulation, good economic efficiency and high productivity. The mold - making method is worth of spreading.

    这种方法制造注塑模型腔具有仿真度经济效益生产效率优点一种值得推广制模方法。

    www.chemyq.com

  • An injection die with a mold cavity was designed though using the injection mold CAE software MOLDFLOW to simulate plastic flow and choosing the molding parameters of polypropylene.

    通过注塑模CAE软件MOLDFLOW件进行流分析选择聚丙烯成型工艺参数,设计模一注射模具

    dict.cnki.net

  • The latter also has an effect on processing since the life of the mold cavity is typically reduced from about 1,000,000 parts for plain resin parts to about 300,000 for glass-filled parts.

    后者加工过程影响因为模具寿命典型普通树脂零件大约1,000,000减少玻璃纤维填充树脂零件的300,000件。

    www.mapeng.net

  • Hot runner nozzle is the terminal of the hot runner system, which includes the heating, the end of the gate, which can transfer the molten material to the mold cavity or the additional cold runner.

    热流喷嘴热流道系统终端包括加热浇口末端,它输送模具型腔附加流道

    www.coretor.com

  • The production process of the inflation aided injection molded furniture includes the following steps: 1. injecting molten plastic into mold cavity to form thin wall solidified layer at the mold wall;

    气辅注塑家具加工方法是:①塑料注射 融的塑料注入模具型腔,熔融热塑料遇到温度较低的模周围形成凝固

    ip.com

  • The stages or steps in a casting process are the making of a suitable mold, the melting of the material, the filling or pouring of the material into the cavity, and the solidification.

    铸造工艺中的阶段步骤包括制作适当铸型融化材料,将材料充满灌注型腔凝固

    out369.com

  • Design of compression mold and manufacture methods of power supply plug-in socket are introduced separately. This mold adopts the structure including one cavity per mold.

    本文介绍了电源插座压制成形模具设计制造方法制模采用模一结构

    www.chemyq.com

  • Apply the weighted surface parameter equation to fit the algorithm of cavity lateral surface, and realize the cavity surface construction of radial parting mold of meridian tire.

    采用加权曲面参数方程型腔侧壁曲面算法实现子午线轮胎活络模模具型腔曲面的构造

    dict.cnki.net

  • The wax positive is invested with a mold made of refractory materials and heated to melt the wax, leaving a narrow cavity Between the core and the investment.

    蜡像外面披盖耐火材料制成模具然后加热使熔化,留下核心披盖模具之间一个狭窄空腔

    tr.bab.la

  • The runner system in the injection mold serves to convey the plastic melt coming from the nozzle of the injection molding machine to the cavity.

    注射浇注系统注塑机喷嘴开始型腔为止塑料流动通道,它是模具的一部分,一般分为普通流道浇注系统和无流道浇注系统两大类。

    dict.cnki.net

  • The effects of technique parameters, cooling cavity structure and conicity of inner-mold on shaping of hollow tubes were discussed.

    探讨了浇注系统、浇注温度、牵引速度等工艺参数以及内结晶器冷却结构锥度空心成形的影响规律。

    dict.cnki.net

  • The Structure designing of bellow seal joint and it′s multiple cavity mold designing are introduced in this paper.

    翻译结构设计波纹密封圈联合多个模腔模具设计引入了一份文件

    www.woyaofanyi.com

  • The cavity dimension calculation of injection mold of plastic small-module precision cylindrical spur gear and its molding technology are introduced.

    介绍了精密塑料模数直齿圆柱齿轮模具型腔尺寸计算方法成型工艺

    dict.cnki.net

  • Is a typical plastic mold, which not only include Xiangpin the cavity, lateral core pulling structure, the dynamic model has forming the core, delay core pulling bodies.

    副比拟典型塑料模具不只包罗镶拼型腔侧向构造定模都有成型的型,还有延时抽芯机构

    dict.youdao.com

  • Firstly, the structure of injection mold is analyzed by use of GT, mold parts are classified to 4 types of ones: cavity or core, mold plate, structure and standard parts.

    首先运用成组技术基本原理,注塑模具结构进行了分析,提出了模具零件按其功用可分为型腔型模板结构件标准件等4零件的分类方法。

    dj.iciba.com

  • In the design of multi-cavity injection mold, the design of the branch of flow channel and the gate has great influence on the quality of plastics products.

    注塑模设计,分流道+设计塑料成型质量影响较大一直是人机交互式流道+设计的难点。

    www.dictall.com

  • The design thinking of multi-cavity mold for the rubber dust cover, taking off and working process are introduced.

    介绍了橡胶防尘多腔模具设计思路、产品取出操作过程

    dict.cnki.net

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定