Finally gate position according the mold flow analysis.
最终的进胶位置根据模流分析。
Analysis of the velocity vectors. Possible mold erosion can be studied.
分析速度矢量。可以分析可能的模具腐蚀。
Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。
We make full use of CAE mold flow analysis techniques, simulation and optimization of mold runner system design, improve part quality and reduce the number of test mode and unnecessary waste.
我们充分利用CAE模流分析技术，模拟和优化模具浇道系统设计，提高零件的质量和减少试模次数及不必要的浪费。
This thesis finished the module of CAE analysis report which is on the basis of Z-MOLD developed by Advanced Polymer Processing Technology of National Engineering Researing Center.
本文在橡塑模具国家工程研究中心自主版权Z-MOLD的基础上，完成了CAE分析结果报告的模块研制；
This paper mainly performs the design and mechanical analysis and research on cold extrusion mold of the gear axis in cars.
本文主要对汽车用齿轮轴的冷挤压模具进行了设计和力学分析研究。
The subject is about the design of Aluminum shell mold and process analysis.
本课题是对铝壳体进行模具设计并分析加工工艺。
The questions of testing outer covering injection mold are stated, analysis on the reason and the mold structure is improved.
叙述了外壳注射模在试模中出现的问题，分析了问题产生的原因并改进了模具结构。
And it also makes a further analysis and study on the key technologies of setting up the mold and the digital scanning.
并对其中的关键技术(包括产品建模和数字化扫描技术)作了进一步的分析和研究。
The paper introduces mold design keys and attentions of oblique gear made from plastics and oblique gear structure and mold design by analysis of example.
通过分析斜齿轮的结构特点并结合模具设计实例介绍了塑料斜齿轮模具的设计要点及注意事项。
A mold technologic analysis system base on agent theory is developed. This agent is a part of the mold workflow management system.
构建的基于代理机制的模具工艺分析系统是模具工作流管理系统的一个组成部分。
Over the process analysis to insulated breadth-restricted cover, mold structure of plastic parts is defined.
通过对限幅绝缘盖板的工艺分析，确定了塑件的模具结构。
Through the technological analysis of the air condition panel, we introduced the structure principle of the stack injection mold for the air condition panel for designing the mold.
分析了空调面板框的结构特点及工艺要求，介绍了叠层式注射模的结构、工作过程以及结构设计要点。
Introduced the structure of medical soft plastic tube; and technology analysis; and structure design of injection mold and mold work principle.
介绍了医用软管塑件结构、工艺分析、注射模结构设计及模具工作过程。
Based on analysis of market conventional sand mold cast process has been compared with EPC process of which design and measures for s. g. iron pipes have been introduced as well as key of technology.
从市场分析入手，对EPC法与传统砂型铸造工艺进行了比较，介绍了EPC法生产球墨铸铁管件的工程设计内容及对策，并提出了工艺设计的关键点。
Based on the analysis of polymer flow in mold filling, the important role of computer aided analysis in injection mold design is presented through concrete examples.
本文在分析注塑模充模流动的基础上，通过具体实例，阐述了计算机辅助分析在模具设计中的作用。
Based on the analysis of the public data center of the injection mold product, product data exchange center about the mold union enterprises is developed.
在对注塑模具产品公共数据中心分析研究的基础上，对模具联盟企业产品数据交互中心进行了研究与开发；
By the simulating analysis to CAE drawing software, adding draw bead restraining mold is applied on the area of deficient stretching, the eligible products are produced finally by die testing.
经过CAE拉伸软件的模拟分析，对于拉伸不足的区域采用增加拉伸筋的方式，通过试模最终加工出合格的零件。
This article has introduced the significance of the application of CAD for the design of plastic mold, and expatiated on CAD integrated technology, its design and analysis.
介绍了计算机辅助设计（CAD）的应用对塑料模具设计的重要性，并对CAD集成技术及其设计和分析作了阐述，同时指出了CAD在模具设计中的发展趋势。
Process window analysis, another part of mold flow analysis, examines melt temperature, mold temperature, injection pressure, and fill times.
加工窗口分析、它零件的模流分析，检查熔体温度、具温度、塑压力和充填时间。
Through analysis of the plastic jacket for precision plastic molding, detailed introduced precision plastic molding, and puts forward the essence of typical position and mold structure.
通过对该护套塑件的分析，对精密塑料件成型模具进行详细的介绍，提出了精密塑料件成型时的精定位问题和对典型模具结构阐述。
The basic ideas of designing plastic product and molds with gas-assisted injection molding technology are demonstrated with the mold designing of a color TV cabinet taken as an example for analysis.
介绍了气体辅助注塑成型技术的工艺过程和特点，阐述了气体辅助注塑产品和模具设计的基本思路，尤以彩色电视机前壳模具为例进行了具体的分析。
The paper introduced the injection defect analysis during production. and provide the solution in machine, mold, process and materials.
本文介绍在实际生产中注射成型产生的缺陷分析，并在设备方面，模具，工艺，原材料方面重点讨论了其解决方案。
The high aluminum bronze alloy to be applied to mold material for stainless steel extrusion is investigated and prepared on the basis of excellent property analysis of the copper based mold materials.
在分析铜合金模具材料优异特性的基础上，研究制备新型高铝复杂青铜合金挤压不锈钢模具材料。
Secondly help mold flow analysis techniques to optimize the process parameters of mold forming, casting systems and cooling systems.
基于模流分析技术优化了模具的成型工艺参数、浇注系统及冷却系统。
Over the analysis to miner's lamp convex structure, and the problems existed in injection mold, injection mold structure of this kind of plastic parts and its working process are defined.
通过对矿灯透镜产品结构分析，以及注射成型存在问题点，确定了该类塑件的注塑模具结构，以及模具工作过程。
According to GT principle, a set of coding system for injection mold is built on the base of injection mold structure feature and function analysis by sorting out the classification mark.
本文运用成组技术原理，在对注塑模具零件结构特点和功能分析的基础上，对注塑模具零件的结构与工艺特征的分类标志进行总结，制定了一套适用于注塑模具零件的分类编码系统。
The effect of different water groove design of the copper plates on the temperature distribution of the mold and the solidifying shell has been studied through thermo-mechanical coupled analysis.
通过对两种不同板坯水槽设计形式进行热力耦合分析，研究了不同水槽设计对结晶器铜板及铸坯初凝坯壳温度分布影响。
With this system, the runner gate system design, mold cooling analysis, surface modeling, and automatic drawing could all be well carried out on microcomputer.
此系统主要解决了四个难点：浇注系统设计、冷却系统分析、型腔、型芯的曲面造型设计、装配图和零件工作图的设计绘制。
Molding equipment were selected based on mold flow analysis.
根据模流分析结果进行了成型设备的选择。
应用推荐