Results show that co-braided optical fibers have just a small quantity of effect on the elastic modulus of the braided composites.
结果表明光纤的编入对材料的拉伸弹性模量和压缩弹性模量影响也较小。
Practice proves that this method not only greatly enhances the bearing capacity and deformation modulus of soft-soil ground, but also greatly decreases the settlement amount of the ground.
实践证明，该方法不仅大幅度提高了软土地基承载能力和变形模量，而且大大减少了地基的沉降量。
The ratio of stress to strain, or the stress per unit strain, is called an elastic modulus of the material.
应力与应变之比，即每单位应变的应力，叫做该材料的弹性模量。
The deformation modulus of rock mass is an important input parameter in analyzing deformation, which should be determined by field tests.
在分析岩体的变形特性时，岩体变形模量是一个非常重要的参数，一般要通过现场试验来确定。
The concrete with this product has excellent anti-frost durability, with a relative dynamic elastic modulus of 97% after 300 cycles of freezing-and-thawing.
混凝土抗冻融300次时，动弹性模量为97%，混凝土具有优良的抗冻融耐久性。
The modulus of non-differentiability of this kind of process is established.
本文将建立这类过程的不可微模及有关的极限定理。
For identical shapes, the stiffness is proportional to the modulus of elasticity.
对于同样外形的材料，刚度与弹性模量是成比例的。
Theoretic analysis for elastic modulus of softwood was carried out in this paper.
本文是关于针叶树木材弹性特性研究的理论分析。
An important mechanic parameter in masonry structure is the modulus of elasticity.
砌体结构中的一个重要力学参数是弹性模量。
The modulus of CFRPET after heat-treatment agrees perfectly with reinforcement law.
热处理后试样的弹性模量与增强定律十分吻合。
Bending Strength and Weibull modulus of eight kinds of ceramics samples were studied.
研究了八种不同陶瓷试样的抗弯强度和韦布尔模数。
Heat treated boards display a reduced modulus of rupture and an increase in dustiness.
经过热处理后，板材的断裂模数变小，而含尘量增加。
This contributes to the increase of tensile strength and modulus of the graphite fibers.
微观结构的改善是石墨纤维抗拉强度和弹性模量提高的主要原因。
The elastic modulus of foam core and composite skins and the stiffness of sandwich are analyzed.
分析了复合材料面层的弹性常数、泡沫芯层的模量和夹层结构的刚度；
The modal frequency of the packaging structure increases with the elastic modulus of potting material.
封装结构的模态频率随着灌封胶弹性模量的增大而增大。
Then water inflow in tunnel is forecasted using groundwater dynamics and groundwater modulus of runoff.
然后利用地下水动力学法、地下水径流模数法对隧道开挖涌水量进行了预测。
The hardness and elastic modulus of the alloy were investigated by means of nano-indentation technology.
利用纳米压入测量仪测试了不同组织结构下的硬度和弹性模量。
The spring element stiffness is related to pre yield shear modulus of MR fluid and accumulator stiffness.
该弹簧单元与磁流变液屈服前区的初始剪切模量和蓄能器的刚度等有关。
The approach of determining deformation modulus of deep soil by deep plate load test is introduced herein.
本文介绍了通过原位深层平板载荷试验测求深层土的变形模量的方法。
The straightforward procedures to achieve shear modulus of colloform and maximum shear stress are specified.
提出了求解胶体剪切模量和最大剪应力的简单方法。
The storage modulus of the hybrid composites under high load approximately conforms to the Composite Beam Theory.
高载荷下混杂复合材料的储能模量仍较好地符合“复合梁理论”。
Titanium has a lower modulus of elasticity-closer to that of host bone-and is more biocompatible than cobalt chrome.
钛金属弹性模量较低，接近宿主骨的弹性模量，生物相容性较钴镍合金更好。
A model is proposed for predicting the effective longitudinal shear modulus of fiber reinforced composite materials.
本文给出一个计算单向纤维增强复合材料纵向剪切模量的模型。
The strength of materials are controlled by porosity, modulus of elasticity, fracture energy and critical flaw sizes.
材料的强度是受气孔率、弹性模量、断裂能和临界缺陷尺寸控制的。
The supersonic wave value and the dynamic modulus of elasticity are increased by high pressure consolidation grouting.
高压固结灌浆结果达到了提高坝基岩石超声波值和动弹模量的目的；
The results showed that the tensile strength, Young's modulus of soy protein plastics with complex plasticizers increased.
结果表明，采用复合增塑剂，大豆蛋白塑料的拉伸强度，杨氏模量均增加。
Experiments show that the accurate equation can express the relationship of porosity and bulk modulus of porous medium well.
试验结果表明，精确公式能够很好地表达多孔介质孔隙率与体积模量之间的关系。
The ground vibrations were calculated to analyze the influences of elastic modulus of soils and the burial depth of tunnels.
计算了列车引起的地面振动，以分析隧道地基弹性模量和隧道埋深对地面振动响应的影响。
Surface course thickness and base modulus of asphalt concrete pavements are important parameters in pavement structure design.
沥青混凝土路面面层厚度和基层模量是路面结构设计中的重要参数。
The different influences on tangent bulk modulus of conventional triaxial test and isotropic compression test were considered.
考虑了常规三轴试验和各向同性压缩试验对切线体积模量的影响。
应用推荐